From 2b03b9a1007c5fe0e90d663fba86b088d6894e3b Mon Sep 17 00:00:00 2001
From: schangxiang@126.com <schangxiang@126.com>
Date: 周六, 15 6月 2024 16:34:02 +0800
Subject: [PATCH] 增加测试
---
DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_Model/TableModel/QualityDataInfo.cs | 90 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 90 insertions(+), 0 deletions(-)
diff --git a/DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_Model/TableModel/QualityDataInfo.cs b/DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_Model/TableModel/QualityDataInfo.cs
index a5ff07b..c6bd10e 100644
--- a/DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_Model/TableModel/QualityDataInfo.cs
+++ b/DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_Model/TableModel/QualityDataInfo.cs
@@ -212,6 +212,96 @@
public string UpdatedUserName { get; set; }
public bool IsDeleted { get; set; }
+
+
+ #region 新增OP80的一些质量数据 【Editby shaocx,2024-06-13】
+
+ /// <summary>
+ /// OP80 质量数据-厚度
+ /// </summary>
+ public string QualityOP80_Houdu { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-中心距
+ /// </summary>
+ public string QualityOP80_ZXJ { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-大头孔圆柱度
+ /// </summary>
+ public string QualityOP80_DTKYZD { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-小头上面圆度
+ /// </summary>
+ public string QualityOP80_XTSMYD { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-小头下面圆度
+ /// </summary>
+ public string QualityOP80_XTXMYD { get; set; }
+
+
+ #region 大头孔直径
+
+ /// <summary>
+ /// OP80 质量数据-大头孔直径,大头孔直径=（大头上面X方向直径+大头上面Y方向直径+大头下面X方向直径+大头下面Y方向直径）/4
+ /// </summary>
+ public string QualityOP80_D_TKZJ { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-大头上面X方向直径
+ /// </summary>
+ public string QualityOP80_D_S_X { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-大头上面Y方向直径
+ /// </summary>
+ public string QualityOP80_D_S_Y { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-大头下面X方向直径
+ /// </summary>
+ public string QualityOP80_D_X_X { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-大头下面Y方向直径
+ /// </summary>
+ public string QualityOP80_D_X_Y { get; set; }
+
+ #endregion
+
+ #region 小头孔直径
+
+ /// <summary>
+ /// OP80 质量数据-小头孔直径,小头孔直径=（小头上面X方向直径+小头上面Y方向直径+小头下面X方向直径+小头下面Y方向直径）/4
+ /// </summary>
+ public string QualityOP80_X_TKZJ { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-小头上面X方向直径
+ /// </summary>
+ public string QualityOP80_X_S_X { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-小头上面Y方向直径
+ /// </summary>
+ public string QualityOP80_X_S_Y { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-小头下面X方向直径
+ /// </summary>
+ public string QualityOP80_X_X_X { get; set; }
+
+ /// <summary>
+ /// OP80 质量数据-小头下面Y方向直径
+ /// </summary>
+ public string QualityOP80_X_X_Y { get; set; }
+
+ #endregion
+
+ #endregion
+
}
/// <summary>
--
Gitblit v1.9.3