DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/BLL/WorkPieceInfoManager.cs
@@ -469,6 +469,9 @@ /// <param name="type"></param> public static void QualityInfoComplete(WorkPieceLogMiddle logMiddle, LogType type) { //根据质量数据判断是否合格/不合格 【Editby shaocx,2024-06-25】 WorkPieceInfoManager.SetLogMiddleForQuality(ref logMiddle); //此处同时插入了WorkPieceLog，WorkPieceInfoLog表，并新增或修改WorkPieceInfo表 //插入质量相关表QualityDataInfo @@ -1023,14 +1026,7 @@ var set_WorkingProcedureCurrent = ""; if (cur_db_info.WorkingProcedureCurrent != "OP10" && cur_db_info.WorkingProcedureCurrent != "OP40") { if (cur_db_info.WorkingProcedureCurrent == "OP05") { set_WorkingProcedureCurrent = "OP10"; } else if (cur_db_info.WorkingProcedureCurrent == "OP35") { set_WorkingProcedureCurrent = "OP40"; } SetWorkingProcedureCurrentForOP10(cur_db_info, ref set_WorkingProcedureCurrent); } else { @@ -1105,6 +1101,37 @@ } } public static void SetWorkingProcedureCurrentForOP10(WorkPieceInfo cur_db_info, ref string set_WorkingProcedureCurrent) { //截断字符串 if (cur_db_info.WorkingProcedureCurrent.Length == 4) { try { var bb = cur_db_info.WorkingProcedureCurrent.Substring(2, 2); int ii = Convert.ToInt32(bb); if (ii <= 10) { set_WorkingProcedureCurrent = "OP10"; } else { set_WorkingProcedureCurrent = "OP40"; } } catch (Exception) { set_WorkingProcedureCurrent = cur_db_info.WorkingProcedureCurrent; } } else { set_WorkingProcedureCurrent = cur_db_info.WorkingProcedureCurrent; } } /// <summary> /// 工序完成 /// </summary> DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/DataCaptureHandler/DataCaptureHandler_OP2002.cs
@@ -1,153 +1,153 @@ using iWare_SCADA_BusinessLogical.BLL; using iWare_SCADA_BusinessLogical.Utils; using iWare_SCADA_Model; using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading; using System.Threading.Tasks; //using iWare_SCADA_BusinessLogical.BLL; //using iWare_SCADA_BusinessLogical.Utils; //using iWare_SCADA_Model; //using System; //using System.Collections.Generic; //using System.Linq; //using System.Text; //using System.Threading; //using System.Threading.Tasks; namespace iWare_SCADA_BusinessLogical { /// <summary> /// OP20测试完成标记 /// </summary> public class DataCaptureHandler_OP2002: DataCaptureHandler { public static readonly DataCaptureHandler_OP2002 Instance = new DataCaptureHandler_OP2002(); //namespace iWare_SCADA_BusinessLogical //{ // /// <summary> // /// OP20测试完成标记 // /// </summary> // public class DataCaptureHandler_OP2002: DataCaptureHandler // { // public static readonly DataCaptureHandler_OP2002 Instance = new DataCaptureHandler_OP2002(); public DataCaptureHandler_OP2002() { } // public DataCaptureHandler_OP2002() // { // } public override string WorkingProcedure { get { return _dataCaptureConfig.WorkingProcedure; } } // public override string WorkingProcedure // { // get { return _dataCaptureConfig.WorkingProcedure; } // } public override string DataCapturePointCode { get { return _dataCaptureConfig.DataCapturePointCode; } } public override string DataCapturePointCname { get { return _dataCaptureConfig.DataCapturePointCname; } } // public override string DataCapturePointCode // { // get { return _dataCaptureConfig.DataCapturePointCode; } // } // public override string DataCapturePointCname // { // get { return _dataCaptureConfig.DataCapturePointCname; } // } public override void RefreshDataList(List<DataCaptureConfig> dataCaptureConfig) { // public override void RefreshDataList(List<DataCaptureConfig> dataCaptureConfig) // { // //try // //{ // // foreach (var dataCaptureColumnDict in dataCaptureConfig) // // { // // switch (dataCaptureColumnDict.DataCapturePointCode) // // { // // case "OP2001": // // //_dataCaptureConfig = dataCaptureColumnDict; // // IsCaptureflag = true; // // return; // // } // // } // //} // //catch (Exception ex) // //{ // // SystemValue._lbl_Alert_OP2001 = $" {RandomHelper.GenerateRandomCode(4)} OP05工序监控打码标记 出现异常，请查看日志！"; // // Log4NetHelper.WriteErrorLog(LogType.PLCOP05, "刷新 OP05工序监控打码标记数据时异常：", ex); // //} // } // public override void DataCaptureStart() // { // if (IsCaptureflag) // { // var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); // if (plcService == null) // { // SystemValue._lbl_Alert_OP2001 = $"{RandomHelper.GenerateRandomCode(4)} 没有找到{_dataCaptureConfig.WorkingProcedure}的PLC设备"; // return; // } // if (plcService != null && !plcService.IsConnected) // { // plcService.Close(); // plcService.OpenService(); // } // while (true) // { //try //{ // foreach (var dataCaptureColumnDict in dataCaptureConfig) // //_dataCaptureConfig // if (plcService == null || !plcService.IsConnected) // { // switch (dataCaptureColumnDict.DataCapturePointCode) // SystemValue._lbl_Alert_OP2001 = $" {RandomHelper.GenerateRandomCode(4)} {_dataCaptureConfig.WorkingProcedure} PLC连接已断开，正在尝试打开!"; // plcService.Close(); // plcService.OpenService(); // Thread.Sleep(100); // continue; // } // else // { // case "OP2001": // //_dataCaptureConfig = dataCaptureColumnDict; // IsCaptureflag = true; // return; // var value = plcService.ReadValuePoint(_dataCaptureConfig.DbNumber, _dataCaptureConfig.Offset, PLCManger.GetTypeForString(_dataCaptureConfig.DataCaptureColumnType)); // if (SystemValue.value_OP2001.Equals("0") && value.ToString().Equals("1")) // {//当上一标记位0，当前获取标记为1时， // //触发操作, 并给静态变量赋值为1 // //业务代码 // WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); // wplog.WorkingProcedure = "OP20"; // wplog.EquipmentID = "OP20"; // wplog.Remarks = "OP20"; // wplog.MonitoringPoint = "OP2002"; // foreach (var col in colConfig) // { // switch(col.DbNumber+ col.Offset) // { // case ""://读取二维码 // var valuecol = plcService.ReadValuePoint(col.DbNumber, col.Offset, PLCManger.GetTypeForString(col.DataCaptureColumnType)); // wplog.WorkPieceID = valuecol.ToString(); // break; // } // } // #region 工控机读取质量信息 // //扫描共享目录并将新的文件扫描返回 // var newFiles = FileHelper.DetectNewFilesCSV("", 10, DateTimeHelper.GetDateTime(), DateTimeHelper.GetDateTime()); // foreach (System.IO.FileInfo file in newFiles) // { // var datatable = CSVHelper.ReadCSV(file.FullName); // } // #endregion // //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 // WorkPieceInfoManager.QualityInfoComplete(wplog, LogType.PLCOP20); // } // SystemValue.value_OP2001 = value.ToString(); // } // SystemValue._lbl_Alert_OP2001 = $"abcdefg:{RandomHelper.GenerateRandomCode(4)}"; //} //catch (Exception ex) //{ // SystemValue._lbl_Alert_OP2001 = $" {RandomHelper.GenerateRandomCode(4)} OP05工序监控打码标记 出现异常，请查看日志！"; // Log4NetHelper.WriteErrorLog(LogType.PLCOP05, "刷新 OP05工序监控打码标记数据时异常：", ex); // SystemValue._lbl_Alert_OP2001 = $" {RandomHelper.GenerateRandomCode(4)} 读取OP05工序监控打码标记 出现异常，请查看日志！"; // Log4NetHelper.WriteErrorLog(LogType.PLCOP05, "读取 OP05工序监控打码标记数据时异常：", ex); //} } // } // } // else // { // SystemValue._lbl_Alert_OP2001 = $" {RandomHelper.GenerateRandomCode(4)} OP05工序监控打码标记 不做校验，请确认配置信息！"; // Log4NetHelper.WriteInfoLog(LogType.PLCOP05, "读OP05工序监控打码标记 不做校验，请确认是否配置异常"); // } // } public override void DataCaptureStart() { if (IsCaptureflag) { var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); if (plcService == null) { SystemValue._lbl_Alert_OP2001 = $"{RandomHelper.GenerateRandomCode(4)} 没有找到{_dataCaptureConfig.WorkingProcedure}的PLC设备"; return; } if (plcService != null && !plcService.IsConnected) { plcService.Close(); plcService.OpenService(); } while (true) { try { //_dataCaptureConfig if (plcService == null || !plcService.IsConnected) { SystemValue._lbl_Alert_OP2001 = $" {RandomHelper.GenerateRandomCode(4)} {_dataCaptureConfig.WorkingProcedure} PLC连接已断开，正在尝试打开!"; plcService.Close(); plcService.OpenService(); Thread.Sleep(100); continue; } else { var value = plcService.ReadValuePoint(_dataCaptureConfig.DbNumber, _dataCaptureConfig.Offset, PLCManger.GetTypeForString(_dataCaptureConfig.DataCaptureColumnType)); if (SystemValue.value_OP2001.Equals("0") && value.ToString().Equals("1")) {//当上一标记位0，当前获取标记为1时， //触发操作, 并给静态变量赋值为1 //业务代码 WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); wplog.WorkingProcedure = "OP20"; wplog.EquipmentID = "OP20"; wplog.Remarks = "OP20"; wplog.MonitoringPoint = "OP2002"; foreach (var col in colConfig) { switch(col.DbNumber+ col.Offset) { case ""://读取二维码 var valuecol = plcService.ReadValuePoint(col.DbNumber, col.Offset, PLCManger.GetTypeForString(col.DataCaptureColumnType)); wplog.WorkPieceID = valuecol.ToString(); break; } } #region 工控机读取质量信息 //扫描共享目录并将新的文件扫描返回 var newFiles = FileHelper.DetectNewFilesCSV("", 10, DateTimeHelper.GetDateTime(), DateTimeHelper.GetDateTime()); foreach (System.IO.FileInfo file in newFiles) { var datatable = CSVHelper.ReadCSV(file.FullName); } #endregion //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, LogType.PLCOP20); } SystemValue.value_OP2001 = value.ToString(); } SystemValue._lbl_Alert_OP2001 = $"abcdefg:{RandomHelper.GenerateRandomCode(4)}"; } catch (Exception ex) { SystemValue._lbl_Alert_OP2001 = $" {RandomHelper.GenerateRandomCode(4)} 读取OP05工序监控打码标记 出现异常，请查看日志！"; Log4NetHelper.WriteErrorLog(LogType.PLCOP05, "读取 OP05工序监控打码标记数据时异常：", ex); } } } else { SystemValue._lbl_Alert_OP2001 = $" {RandomHelper.GenerateRandomCode(4)} OP05工序监控打码标记 不做校验，请确认配置信息！"; Log4NetHelper.WriteInfoLog(LogType.PLCOP05, "读OP05工序监控打码标记 不做校验，请确认是否配置异常"); } } } } // } //} DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/DataCaptureHandler/DataCaptureHandler_OP3502.cs
@@ -1,195 +1,198 @@ using iWare_SCADA_BusinessLogical.BLL; using iWare_SCADA_BusinessLogical.Utils; using iWare_SCADA_Model; using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading; using System.Threading.Tasks; using System.Web.UI.WebControls; //using iWare_SCADA_BusinessLogical.BLL; //using iWare_SCADA_BusinessLogical.Utils; //using iWare_SCADA_Model; //using System; //using System.Collections.Generic; //using System.Linq; //using System.Text; //using System.Threading; //using System.Threading.Tasks; //using System.Web.UI.WebControls; namespace iWare_SCADA_BusinessLogical { /// <summary> /// OP35测量完成标记 /// </summary> public class DataCaptureHandler_OP3502: DataCaptureHandler { public static readonly DataCaptureHandler_OP3502 Instance = new DataCaptureHandler_OP3502(); //namespace iWare_SCADA_BusinessLogical //{ // /// <summary> // /// OP35测量完成标记 // /// </summary> // public class DataCaptureHandler_OP3502 : DataCaptureHandler // { // public static readonly DataCaptureHandler_OP3502 Instance = new DataCaptureHandler_OP3502(); public DataCaptureHandler_OP3502() { } // public DataCaptureHandler_OP3502() // { // } public override string WorkingProcedure { get { return _dataCaptureConfig.WorkingProcedure; } } // public override string WorkingProcedure // { // get { return _dataCaptureConfig.WorkingProcedure; } // } public override string DataCapturePointCode { get { return _dataCaptureConfig.DataCapturePointCode; } } public override string DataCapturePointCname { get { return _dataCaptureConfig.DataCapturePointCname; } } // public override string DataCapturePointCode // { // get { return _dataCaptureConfig.DataCapturePointCode; } // } // public override string DataCapturePointCname // { // get { return _dataCaptureConfig.DataCapturePointCname; } // } public override void RefreshDataList(List<DataCaptureConfig> dataCaptureConfig) { } // public override void RefreshDataList(List<DataCaptureConfig> dataCaptureConfig) // { // } public override void DataCaptureStart() { if (SystemValue.isStartedImitateModel) { var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); wplog.WorkingProcedure = WorkingProcedure; wplog.EquipmentID = WorkingProcedure; wplog.Remarks = WorkingProcedure; wplog.MonitoringPoint = DataCapturePointCode; wplog.WorkPieceID = "123456"; wplog.CreatedTime = DateTimeHelper.GetDateTime(); wplog.CreatedUserName = DataCapturePointCode; wplog.IsDeleted = false; wplog.QualityType = QualityType.Online.ToString(); // public override void DataCaptureStart() // { // if (SystemValue.isStartedImitateModel) // { // //模拟代码注释 // /* // var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); // WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); // wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); // wplog.WorkingProcedure = WorkingProcedure; // wplog.EquipmentID = WorkingProcedure; // wplog.Remarks = WorkingProcedure; // wplog.MonitoringPoint = DataCapturePointCode; // wplog.WorkPieceID = "123456"; // wplog.CreatedTime = DateTimeHelper.GetDateTime(); // wplog.CreatedUserName = DataCapturePointCode; // wplog.IsDeleted = false; // wplog.QualityType = QualityType.Online.ToString(); wplog.WorkPieceID = WorkPieceID; wplog.EquipmentID = _dataCaptureConfig.EquipmentID; wplog.UpdatedTime = DateTimeHelper.GetDateTime(); wplog.UpdatedUserName = DataCapturePointCode; wplog.QualityState = (int)QualityState.NG; wplog.QualityStateUpdateUser = WorkingProcedure; wplog.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString(); // wplog.WorkPieceID = WorkPieceID; // wplog.EquipmentID = _dataCaptureConfig.EquipmentID; // wplog.UpdatedTime = DateTimeHelper.GetDateTime(); // wplog.UpdatedUserName = DataCapturePointCode; // wplog.QualityState = (int)QualityState.NG; // wplog.QualityStateUpdateUser = WorkingProcedure; // wplog.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString(); wplog.QualityOP35To1 = "QualityOP35To1"; wplog.QualityOP35To2 = "QualityOP35To2"; //wplog.QualityOP35To3 = "QualityOP35To3"; //wplog.QualityOP35To4 = "QualityOP35To4"; //wplog.QualityOP35To5 = "QualityOP35To5"; //wplog.QualityOP35To6 = "QualityOP35To6"; //wplog.QualityOP35To7 = "QualityOP35To7"; // wplog.QualityOP35To1 = "QualityOP35To1"; // wplog.QualityOP35To2 = "QualityOP35To2"; // //wplog.QualityOP35To3 = "QualityOP35To3"; // //wplog.QualityOP35To4 = "QualityOP35To4"; // //wplog.QualityOP35To5 = "QualityOP35To5"; // //wplog.QualityOP35To6 = "QualityOP35To6"; // //wplog.QualityOP35To7 = "QualityOP35To7"; //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); // //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 // WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); // //*/ return; } if (IsCaptureflag) { var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); if (plcService == null) { SystemValue.lbl_Alert_OP3502 = $"{RandomHelper.GenerateRandomCode(4)} 没有找到{_dataCaptureConfig.WorkingProcedure}的PLC设备"; return; } if (plcService != null && !plcService.IsConnected) { plcService.Close(); plcService.OpenService(); } while (true) { ThreadStatusMonitor threadStatusMonitor = new ThreadStatusMonitor(); threadStatusMonitor.Threadcode = DataCapturePointCode; threadStatusMonitor.Threadcname = DataCapturePointCname; threadStatusMonitor.Threadendtime = DateTime.Now; threadStatusMonitor.Threadlastmodifytime = DateTime.Now; threadStatusMonitor.Threadstatue = 0; threadStatusMonitor.ThreadId = Thread.CurrentThread.ManagedThreadId.ToString(); try { //_dataCaptureConfig if (plcService == null || !plcService.IsConnected) { SystemValue.lbl_Alert_OP3502 = $" {RandomHelper.GenerateRandomCode(4)} {_dataCaptureConfig.WorkingProcedure} PLC连接已断开，正在尝试打开!"; plcService.Close(); plcService.OpenService(); Thread.Sleep(100); continue; } else { var value = plcService.ReadValuePoint(_dataCaptureConfig.DbNumber, _dataCaptureConfig.Offset, PLCManger.GetTypeForString(_dataCaptureConfig.DataCaptureColumnType)); if (SystemValue.value_OP3502.Equals("FALSE") && value.ToString().ToUpper().Equals("TRUE")) {//当上一标记位0，当前获取标记为1时， //触发操作, 并给静态变量赋值为1 //业务代码 WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); wplog.WorkingProcedure = WorkingProcedure; wplog.EquipmentID = WorkingProcedure; wplog.Remarks = WorkingProcedure; wplog.MonitoringPoint = DataCapturePointCode; wplog.CreatedTime = DateTimeHelper.GetDateTime(); wplog.CreatedUserName = DataCapturePointCode; wplog.IsDeleted = false; wplog.QualityType = QualityType.Online.ToString(); // return; // } // if (IsCaptureflag) // { // var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); // if (plcService == null) // { // SystemValue.lbl_Alert_OP3502 = $"{RandomHelper.GenerateRandomCode(4)} 没有找到{_dataCaptureConfig.WorkingProcedure}的PLC设备"; // return; // } // if (plcService != null && !plcService.IsConnected) // { // plcService.Close(); // plcService.OpenService(); // } // while (true) // { // ThreadStatusMonitor threadStatusMonitor = new ThreadStatusMonitor(); // threadStatusMonitor.Threadcode = DataCapturePointCode; // threadStatusMonitor.Threadcname = DataCapturePointCname; // threadStatusMonitor.Threadendtime = DateTime.Now; // threadStatusMonitor.Threadlastmodifytime = DateTime.Now; // threadStatusMonitor.Threadstatue = 0; // threadStatusMonitor.ThreadId = Thread.CurrentThread.ManagedThreadId.ToString(); // try // { // //_dataCaptureConfig // if (plcService == null || !plcService.IsConnected) // { // SystemValue.lbl_Alert_OP3502 = $" {RandomHelper.GenerateRandomCode(4)} {_dataCaptureConfig.WorkingProcedure} PLC连接已断开，正在尝试打开!"; // plcService.Close(); // plcService.OpenService(); // Thread.Sleep(100); // continue; // } // else // { // var value = plcService.ReadValuePoint(_dataCaptureConfig.DbNumber, _dataCaptureConfig.Offset, PLCManger.GetTypeForString(_dataCaptureConfig.DataCaptureColumnType)); // if (SystemValue.value_OP3502.Equals("FALSE") && value.ToString().ToUpper().Equals("TRUE")) // {//当上一标记位0，当前获取标记为1时， // //触发操作, 并给静态变量赋值为1 // //业务代码 // WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); // wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); // wplog.WorkingProcedure = WorkingProcedure; // wplog.EquipmentID = WorkingProcedure; // wplog.Remarks = WorkingProcedure; // wplog.MonitoringPoint = DataCapturePointCode; // wplog.CreatedTime = DateTimeHelper.GetDateTime(); // wplog.CreatedUserName = DataCapturePointCode; // wplog.IsDeleted = false; // wplog.QualityType = QualityType.Online.ToString(); foreach (var col in colConfig.Where(o => o.DataCapturePointCode == DataCapturePointCode)) { try { var valuecol = plcService.ReadValuePoint(col.DbNumber, col.Offset, col.DataCaptureColumnLength.Value, PLCManger.GetTypeForString(col.DataCaptureColumnType)); //wplog.GetType().GetProperty(col.DataCaptureColumnTabelName).SetValue(wplog, valuecol);//给动态字段赋值 var set = wplog.GetType().GetProperty(col.DataCaptureColumnTabelName); if (set == null) { Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序监控测量完成标记 读取工件码动态由于字段名没找到，赋值【{WorkingProcedure ?? "空字符串"}】失败{wplog.Id}"); } set.SetValue(wplog, valuecol);//给动态字段赋值 } catch (Exception setex) { Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序监控测量完成标记 读取工件码动态赋值【{WorkingProcedure ?? "空字符串"}】异常{wplog.Id}", setex); } } //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); threadStatusMonitor.Threadstatue = 1; // foreach (var col in colConfig.Where(o => o.DataCapturePointCode == DataCapturePointCode)) // { // try // { // var valuecol = plcService.ReadValuePoint(col.DbNumber, col.Offset, col.DataCaptureColumnLength.Value, PLCManger.GetTypeForString(col.DataCaptureColumnType)); // //wplog.GetType().GetProperty(col.DataCaptureColumnTabelName).SetValue(wplog, valuecol);//给动态字段赋值 // var set = wplog.GetType().GetProperty(col.DataCaptureColumnTabelName); // if (set == null) // { // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序监控测量完成标记 读取工件码动态由于字段名没找到，赋值【{WorkingProcedure ?? "空字符串"}】失败{wplog.Id}"); // } // set.SetValue(wplog, valuecol);//给动态字段赋值 // } // catch (Exception setex) // { // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序监控测量完成标记 读取工件码动态赋值【{WorkingProcedure ?? "空字符串"}】异常{wplog.Id}", setex); // } // } // //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 // WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); // threadStatusMonitor.Threadstatue = 1; } SystemValue.value_OP3502 = value.ToString(); // } // SystemValue.value_OP3502 = value.ToString(); } SystemValue.lbl_Alert_OP3502 = $"abcdefg:{RandomHelper.GenerateRandomCode(4)}"; if (!_dataCaptureConfig.DataCaptureFrequency.HasValue || _dataCaptureConfig.DataCaptureFrequency < 10) { Thread.Sleep(5000); } else { Thread.Sleep(_dataCaptureConfig.DataCaptureFrequency.Value); } // } // SystemValue.lbl_Alert_OP3502 = $"abcdefg:{RandomHelper.GenerateRandomCode(4)}"; // if (!_dataCaptureConfig.DataCaptureFrequency.HasValue || _dataCaptureConfig.DataCaptureFrequency < 10) // { // Thread.Sleep(5000); // } // else // { // Thread.Sleep(_dataCaptureConfig.DataCaptureFrequency.Value); // } } catch (Exception ex) { SystemValue.lbl_Alert_OP3502 = $" {RandomHelper.GenerateRandomCode(4)} 读取{DataCapturePointCode}工序监控测量标记 出现异常，请查看日志！"; Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读取 {DataCapturePointCode}工序监控测量标记数据时异常：", ex); } finally { WorkPieceInfoManager.ThreadMonitor(threadStatusMonitor); } } } else { SystemValue.lbl_Alert_OP3502 = $" {RandomHelper.GenerateRandomCode(4)} {DataCapturePointCode}工序监控测量标记 不做校验，请确认配置信息！"; Log4NetHelper.WriteInfoLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读{DataCapturePointCode}工序监控测量标记 不做校验，请确认是否配置异常"); } } // } // catch (Exception ex) // { // SystemValue.lbl_Alert_OP3502 = $" {RandomHelper.GenerateRandomCode(4)} 读取{DataCapturePointCode}工序监控测量标记 出现异常，请查看日志！"; // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读取 {DataCapturePointCode}工序监控测量标记数据时异常：", ex); // } // finally // { // WorkPieceInfoManager.ThreadMonitor(threadStatusMonitor); // } // } // } // else // { // SystemValue.lbl_Alert_OP3502 = $" {RandomHelper.GenerateRandomCode(4)} {DataCapturePointCode}工序监控测量标记 不做校验，请确认配置信息！"; // Log4NetHelper.WriteInfoLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读{DataCapturePointCode}工序监控测量标记 不做校验，请确认是否配置异常"); // } // } } } // } //} DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/DataCaptureHandler/DataCaptureHandler_OP8002.cs
@@ -1,194 +1,196 @@ using iWare_SCADA_BusinessLogical.BLL; using iWare_SCADA_BusinessLogical.Utils; using iWare_SCADA_Model; using System; using System.Collections.Generic; using System.Linq; using System.Text; using System.Threading; using System.Threading.Tasks; using System.Web.UI.WebControls; //using iWare_SCADA_BusinessLogical.BLL; //using iWare_SCADA_BusinessLogical.Utils; //using iWare_SCADA_Model; //using System; //using System.Collections.Generic; //using System.Linq; //using System.Text; //using System.Threading; //using System.Threading.Tasks; //using System.Web.UI.WebControls; namespace iWare_SCADA_BusinessLogical { /// <summary> /// OP80测量完成标记 /// </summary> public class DataCaptureHandler_OP8002: DataCaptureHandler { public static readonly DataCaptureHandler_OP8002 Instance = new DataCaptureHandler_OP8002(); //namespace iWare_SCADA_BusinessLogical //{ // /// <summary> // /// OP80测量完成标记 // /// </summary> // public class DataCaptureHandler_OP8002 : DataCaptureHandler // { // public static readonly DataCaptureHandler_OP8002 Instance = new DataCaptureHandler_OP8002(); public DataCaptureHandler_OP8002() { } // public DataCaptureHandler_OP8002() // { // } public override string WorkingProcedure { get { return _dataCaptureConfig.WorkingProcedure; } } // public override string WorkingProcedure // { // get { return _dataCaptureConfig.WorkingProcedure; } // } public override string DataCapturePointCode { get { return _dataCaptureConfig.DataCapturePointCode; } } public override string DataCapturePointCname { get { return _dataCaptureConfig.DataCapturePointCname; } } // public override string DataCapturePointCode // { // get { return _dataCaptureConfig.DataCapturePointCode; } // } // public override string DataCapturePointCname // { // get { return _dataCaptureConfig.DataCapturePointCname; } // } public override void RefreshDataList(List<DataCaptureConfig> dataCaptureConfig) { // public override void RefreshDataList(List<DataCaptureConfig> dataCaptureConfig) // { // //try // //{ // // foreach (var dataCaptureColumnDict in dataCaptureConfig) // // { // // switch (dataCaptureColumnDict.DataCapturePointCode) // // { // // case "OP8002": // // //_dataCaptureConfig = dataCaptureColumnDict; // // IsCaptureflag = true; // // return; // // } // // } // //} // //catch (Exception ex) // //{ // // SystemValue._lbl_Alert_OP8002 = $" {RandomHelper.GenerateRandomCode(4)} OP80工序监控打码标记 出现异常，请查看日志！"; // // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), "刷新 OP80工序监控打码标记数据时异常：", ex); // //} // } // public override void DataCaptureStart() // { // if (SystemValue.isStartedImitateModel) // { // //模拟代码注释 // /* // var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); // WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); // wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); // wplog.WorkingProcedure = WorkingProcedure; // wplog.EquipmentID = WorkingProcedure; // wplog.Remarks = WorkingProcedure; // wplog.MonitoringPoint = DataCapturePointCode; // wplog.WorkPieceID = "123456"; // wplog.CreatedTime = DateTimeHelper.GetDateTime(); // wplog.CreatedUserName = DataCapturePointCode; // wplog.IsDeleted = false; // wplog.QualityType = QualityType.Online.ToString(); // wplog.WorkPieceID = WorkPieceID; // wplog.EquipmentID = _dataCaptureConfig.EquipmentID; // wplog.UpdatedTime = DateTimeHelper.GetDateTime(); // wplog.UpdatedUserName = DataCapturePointCode; // wplog.QualityState = (int)QualityState.NG; // wplog.QualityStateUpdateUser = WorkingProcedure; // wplog.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString(); // wplog.QualityOP80To1 = "QualityOP80To1"; // wplog.QualityOP80To2 = "QualityOP80To2"; // wplog.QualityOP80To3 = "QualityOP80To3"; // wplog.QualityOP80To4 = "QualityOP80To4"; // wplog.QualityOP80To5 = "QualityOP80To5"; // wplog.QualityOP80To6 = "QualityOP80To6"; // wplog.QualityOP80To7 = "QualityOP80To7"; // //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 // WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); // //*/ // return; // } // if (IsCaptureflag) // { // var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); // if (plcService == null) // { // SystemValue.lbl_Alert_OP8002 = $"{RandomHelper.GenerateRandomCode(4)} 没有找到{_dataCaptureConfig.WorkingProcedure}的PLC设备"; // return; // } // if (plcService != null && !plcService.IsConnected) // { // plcService.Close(); // plcService.OpenService(); // } // while (true) // { //try //{ // foreach (var dataCaptureColumnDict in dataCaptureConfig) // //_dataCaptureConfig // if (plcService == null || !plcService.IsConnected) // { // switch (dataCaptureColumnDict.DataCapturePointCode) // SystemValue.lbl_Alert_OP8002 = $" {RandomHelper.GenerateRandomCode(4)} {_dataCaptureConfig.WorkingProcedure} PLC连接已断开，正在尝试打开!"; // plcService.Close(); // plcService.OpenService(); // Thread.Sleep(100); // continue; // } // else // { // case "OP8002": // //_dataCaptureConfig = dataCaptureColumnDict; // IsCaptureflag = true; // return; // var value = plcService.ReadValuePoint(_dataCaptureConfig.DbNumber, _dataCaptureConfig.Offset, PLCManger.GetTypeForString(_dataCaptureConfig.DataCaptureColumnType)); // if (SystemValue.value_OP8002.Equals("0") && value.ToString().Equals("1")) // {//当上一标记位0，当前获取标记为1时， // //触发操作, 并给静态变量赋值为1 // //业务代码 // WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); // wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); // wplog.WorkingProcedure = WorkingProcedure; // wplog.EquipmentID = WorkingProcedure; // wplog.Remarks = WorkingProcedure; // wplog.MonitoringPoint = DataCapturePointCode; // wplog.WorkPieceID = "123456"; // wplog.CreatedTime = DateTimeHelper.GetDateTime(); // wplog.CreatedUserName = DataCapturePointCode; // wplog.IsDeleted = false; // wplog.QualityType = QualityType.Online.ToString(); // //foreach (var col in colConfig) // //{ // // switch(col.DbNumber+ col.Offset) // // { // // case "": // var valuecol = plcService.ReadValuePoint("2050", "28", 25, typeof(string)); // wplog.WorkPieceID = valuecol.ToString(); // // break; // // } // //} // //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 // WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); // } // SystemValue.value_OP8002 = value.ToString(); // } // SystemValue.lbl_Alert_OP8002 = $"abcdefg:{RandomHelper.GenerateRandomCode(4)}"; // if (!_dataCaptureConfig.DataCaptureFrequency.HasValue || _dataCaptureConfig.DataCaptureFrequency < 10) // { // Thread.Sleep(5000); // } // else // { // Thread.Sleep(_dataCaptureConfig.DataCaptureFrequency.Value); // } //} //catch (Exception ex) //{ // SystemValue._lbl_Alert_OP8002 = $" {RandomHelper.GenerateRandomCode(4)} OP80工序监控打码标记 出现异常，请查看日志！"; // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), "刷新 OP80工序监控打码标记数据时异常：", ex); // SystemValue.lbl_Alert_OP8002 = $" {RandomHelper.GenerateRandomCode(4)} 读取{WorkingProcedure}工序监控打码标记 出现异常，请查看日志！"; // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), "读取 {WorkingProcedure}工序监控打码标记数据时异常：", ex); //} } public override void DataCaptureStart() { if (SystemValue.isStartedImitateModel) { var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); wplog.WorkingProcedure = WorkingProcedure; wplog.EquipmentID = WorkingProcedure; wplog.Remarks = WorkingProcedure; wplog.MonitoringPoint = DataCapturePointCode; wplog.WorkPieceID = "123456"; wplog.CreatedTime = DateTimeHelper.GetDateTime(); wplog.CreatedUserName = DataCapturePointCode; wplog.IsDeleted = false; wplog.QualityType = QualityType.Online.ToString(); wplog.WorkPieceID = WorkPieceID; wplog.EquipmentID = _dataCaptureConfig.EquipmentID; wplog.UpdatedTime = DateTimeHelper.GetDateTime(); wplog.UpdatedUserName = DataCapturePointCode; wplog.QualityState = (int)QualityState.NG; wplog.QualityStateUpdateUser = WorkingProcedure; wplog.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString(); wplog.QualityOP80To1 = "QualityOP80To1"; wplog.QualityOP80To2 = "QualityOP80To2"; wplog.QualityOP80To3 = "QualityOP80To3"; wplog.QualityOP80To4 = "QualityOP80To4"; wplog.QualityOP80To5 = "QualityOP80To5"; wplog.QualityOP80To6 = "QualityOP80To6"; wplog.QualityOP80To7 = "QualityOP80To7"; //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); return; } if (IsCaptureflag) { var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); if (plcService == null) { SystemValue.lbl_Alert_OP8002 = $"{RandomHelper.GenerateRandomCode(4)} 没有找到{_dataCaptureConfig.WorkingProcedure}的PLC设备"; return; } if (plcService != null && !plcService.IsConnected) { plcService.Close(); plcService.OpenService(); } while (true) { try { //_dataCaptureConfig if (plcService == null || !plcService.IsConnected) { SystemValue.lbl_Alert_OP8002 = $" {RandomHelper.GenerateRandomCode(4)} {_dataCaptureConfig.WorkingProcedure} PLC连接已断开，正在尝试打开!"; plcService.Close(); plcService.OpenService(); Thread.Sleep(100); continue; } else { var value = plcService.ReadValuePoint(_dataCaptureConfig.DbNumber, _dataCaptureConfig.Offset, PLCManger.GetTypeForString(_dataCaptureConfig.DataCaptureColumnType)); if (SystemValue.value_OP8002.Equals("0") && value.ToString().Equals("1")) {//当上一标记位0，当前获取标记为1时， //触发操作, 并给静态变量赋值为1 //业务代码 WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); wplog.WorkingProcedure = WorkingProcedure; wplog.EquipmentID = WorkingProcedure; wplog.Remarks = WorkingProcedure; wplog.MonitoringPoint = DataCapturePointCode; wplog.WorkPieceID = "123456"; wplog.CreatedTime = DateTimeHelper.GetDateTime(); wplog.CreatedUserName = DataCapturePointCode; wplog.IsDeleted = false; wplog.QualityType = QualityType.Online.ToString(); //foreach (var col in colConfig) // } // } // else //{ // switch(col.DbNumber+ col.Offset) // { // case "": var valuecol = plcService.ReadValuePoint("2050", "28", 25, typeof(string)); wplog.WorkPieceID = valuecol.ToString(); // break; // SystemValue.lbl_Alert_OP8002 = $" {RandomHelper.GenerateRandomCode(4)} {WorkingProcedure}工序监控打码标记 不做校验，请确认配置信息！"; // Log4NetHelper.WriteInfoLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), "读{WorkingProcedure}工序监控打码标记 不做校验，请确认是否配置异常"); // } //} //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); } SystemValue.value_OP8002 = value.ToString(); } SystemValue.lbl_Alert_OP8002 = $"abcdefg:{RandomHelper.GenerateRandomCode(4)}"; if (!_dataCaptureConfig.DataCaptureFrequency.HasValue || _dataCaptureConfig.DataCaptureFrequency < 10) { Thread.Sleep(5000); } else { Thread.Sleep(_dataCaptureConfig.DataCaptureFrequency.Value); } } catch (Exception ex) { SystemValue.lbl_Alert_OP8002 = $" {RandomHelper.GenerateRandomCode(4)} 读取{WorkingProcedure}工序监控打码标记 出现异常，请查看日志！"; Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), "读取 {WorkingProcedure}工序监控打码标记数据时异常：", ex); } } } else { SystemValue.lbl_Alert_OP8002 = $" {RandomHelper.GenerateRandomCode(4)} {WorkingProcedure}工序监控打码标记 不做校验，请确认配置信息！"; Log4NetHelper.WriteInfoLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), "读{WorkingProcedure}工序监控打码标记 不做校验，请确认是否配置异常"); } } } } // } //} DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/DataCaptureHandlerV2/DataCaptureHandler_02.cs
@@ -57,6 +57,8 @@ { if (SystemValue.isStartedImitateModel) { //模拟代码注释 /* var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); @@ -90,6 +92,7 @@ //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); //*/ return; } @@ -610,8 +613,6 @@ Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"{DataCapturePointCode}测量完成读取文件数据时异常,避免工序完成异常：", ex); } //根据质量数据判断是否合格/不合格 【Editby shaocx,2024-06-25】 WorkPieceInfoManager.SetLogMiddleForQuality(ref logMiddle); //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(logMiddle, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/DataCaptureHandlerV2/DataCaptureHandler_OP3002.cs
@@ -1,268 +1,268 @@ using iWare_SCADA_BusinessLogical.BLL; using iWare_SCADA_BusinessLogical.Utils; using iWare_SCADA_Model; using iWare_SCADA_Model.MiddleModel; using System; using System.Collections.Generic; using System.IO; using System.Linq; using System.Text; using System.Threading; using System.Threading.Tasks; using System.Web.UI.WebControls; //using iWare_SCADA_BusinessLogical.BLL; //using iWare_SCADA_BusinessLogical.Utils; //using iWare_SCADA_Model; //using iWare_SCADA_Model.MiddleModel; //using System; //using System.Collections.Generic; //using System.IO; //using System.Linq; //using System.Text; //using System.Threading; //using System.Threading.Tasks; //using System.Web.UI.WebControls; namespace iWare_SCADA_BusinessLogical { /// <summary> /// 测量完成标记 /// </summary> public class DataCaptureHandler_OP3002: DataCaptureHandler { public static readonly DataCaptureHandler_OP3002 Instance = new DataCaptureHandler_OP3002(); public DataCaptureHandler_OP3002() { } public override string WorkingProcedure { get { return _dataCaptureConfig.WorkingProcedure; } } public override string DataCapturePointCode { get { return _dataCaptureConfig.DataCapturePointCode; } } public override string DataCapturePointCname { get { return _dataCaptureConfig.DataCapturePointCname; } } public override void RefreshDataList(List<DataCaptureConfig> dataCaptureConfig) { } public override void DataCaptureStart() { ThreadStatusMonitorMiddle threadStatusMonitor = new ThreadStatusMonitorMiddle(); if (IsCaptureflag) { //var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); var plcService = SystemValue.GetPLCService(_dataCaptureConfig); if (plcService == null) { threadStatusMonitor.ErrorMsg = $"{RandomHelper.GenerateRandomCode(4)} 没有找到{_dataCaptureConfig.WorkingProcedure}的PLC设备"; return; } if (plcService != null && !plcService.IsConnected) { SystemValue.PLCServiceReconnect(plcService); //plcService.Close(); //plcService.OpenService(); } string Station = "03"; string value_02 = ""; string path = ConfigHelper.GetConfigString("OP30QualityDataForStation");//打码机打码二维码路径 if(string.IsNullOrEmpty(path)) { path = @"Z:\"; } if(DataCapturePointCode.Contains("CH3")) {//工位3 涨断力矩 path = path + "kistler_crack"; } else if (DataCapturePointCode.Contains("CH4")) {//工位4 预拧紧力矩 path = path + "Bosch_Rexroth"; } else if (DataCapturePointCode.Contains("CH5")) {//工位5 拧紧力矩 path = path + "Bosch_Rexroth"; } else if (DataCapturePointCode.Contains("CH6")) {//工位6 衬套压装力矩 path = path + "kistler_bush"; } // 质量信息：涨断力矩... 预拧紧力矩 预拧紧角度 终拧紧力矩 终拧紧角度 //kistler_crack 涨断力矩 工位3 涨断力矩（Y - Maximum） 质量结果（Result） //kistler_bush 压装力矩 工位6 衬套压装力矩（Y - Maximum） 衬套压装位移（Block X） 质量结果（Result） //Bosch_Rexroth /（Ch_0_1.csv / Ch_0_2.csv 两通道 同时取最新的（或者id对应？）） 预拧紧力矩工位4 预拧紧力矩（T + Nm） 质量结果（结果） 目前文件不能自动生成 博世 力士乐拧紧系统 //Bosch_Rexroth /（Ch_0_3.csv / Ch_0_4.csv 两通道 同时取最新的（或者id对应？）） 终拧紧工位5 拧紧力矩（T + Nm） 终拧紧角度 while (true) { threadStatusMonitor.ErrorMsg = ""; threadStatusMonitor.Threadcode = DataCapturePointCode; threadStatusMonitor.Threadcname = DataCapturePointCname; threadStatusMonitor.Threadendtime = DateTime.Now; //threadStatusMonitor.Threadlastmodifytime = DateTime.Now; threadStatusMonitor.Threadstatue = 0; threadStatusMonitor.ThreadId = Thread.CurrentThread.ManagedThreadId.ToString(); try { //_dataCaptureConfig if (plcService == null || !plcService.IsConnected) { threadStatusMonitor.ErrorMsg = $" {RandomHelper.GenerateRandomCode(4)} {_dataCaptureConfig.WorkingProcedure} PLC连接已断开，正在尝试打开!"; WorkPieceInfoManager.ThreadMonitor(threadStatusMonitor); SystemValue.PLCServiceReconnect(plcService); //plcService.Close(); //plcService.OpenService(); Thread.Sleep(100); continue; } else { var value = plcService.ReadValuePoint(_dataCaptureConfig.DbNumber, _dataCaptureConfig.Offset, PLCManger.GetTypeForString(_dataCaptureConfig.DataCaptureColumnType)); if (value_02.ToUpper().Equals("FALSE") && value.ToString().ToUpper().Equals("TRUE")) {//当上一标记位0，当前获取标记为1时， //触发操作, 并给静态变量赋值为1 //业务代码 threadStatusMonitor.Threadlastmodifytime = DateTime.Now; WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); wplog.WorkingProcedure = WorkingProcedure; wplog.EquipmentID = _dataCaptureConfig.EquipmentID; ; wplog.Remarks = WorkingProcedure; wplog.MonitoringPoint = DataCapturePointCode; wplog.CreatedTime = DateTimeHelper.GetDateTime(); wplog.CreatedUserName = DataCapturePointCode; wplog.UpdatedUserName = Environment.MachineName+"自动" + Thread.CurrentThread.ManagedThreadId.ToString(); wplog.UpdatedTime = DateTimeHelper.GetDateTime(); wplog.IsDeleted = false; wplog.QualityType = QualityType.Online.ToString(); ////扫描共享目录并将新的文件扫描返回 一般节拍在15秒左右（可以确认一下） ////扫描修改时间在上次扫描时间之前10秒到当前时间的之间的文件 //var startTime = CommonManager.Instance.CheackPath(Environment.CurrentDirectory + $"\\LastModifyTime\\OP30Station{Station}-LastScapTime.txt", 6, -10); //var endTime = DateTimeHelper.GetDateTime(); //var newFiles = FileHelper.DetectNewFilesCSV(path, 10, Convert.ToDateTime(startTime), endTime); //foreach (System.IO.FileInfo file in newFiles) //namespace iWare_SCADA_BusinessLogical //{ // /// <summary> // /// 测量完成标记 // /// </summary> // public class DataCaptureHandler_OP3002: DataCaptureHandler // { // public static readonly DataCaptureHandler_OP3002 Instance = new DataCaptureHandler_OP3002(); // public DataCaptureHandler_OP3002() // { //} foreach (var col in colConfig.Where(o => o.DataCapturePointCode == DataCapturePointCode)) { try { var valuecol = plcService.ReadValuePoint(col.DbNumber, col.Offset, col.DataCaptureColumnLength.Value, PLCManger.GetTypeForString(col.DataCaptureColumnType)); //wplog.GetType().GetProperty(col.DataCaptureColumnTabelName).SetValue(wplog, valuecol);//给动态字段赋值 var set = wplog.GetType().GetProperty(col.DataCaptureColumnTabelName); if (set == null) { Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序监控测量完成标记 读取工件码动态由于字段名没找到，赋值【{WorkingProcedure ?? "空字符串"}】失败{wplog.Id}"); } set.SetValue(wplog, valuecol);//给动态字段赋值 } catch (Exception setex) { Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序监控测量完成标记 读取工件码动态赋值【{WorkingProcedure ?? "空字符串"}】异常{wplog.Id}", setex); } } // public override string WorkingProcedure // { // get { return _dataCaptureConfig.WorkingProcedure; } // } try { if (WorkingProcedure.Equals("OP80")) { //OP80 需要扫描文件读取质量信息 //扫描修改时间在上次扫描时间之前60秒到当前时间的之间的文件 List<FileInfo> files = new List<FileInfo>(); var newFiles = FileHelper.DetectNewFilesCSV(path, 60, DateTimeHelper.GetDateTime(), DateTimeHelper.GetDateTime().AddHours(1)); foreach (var file in newFiles) { files.Add((FileInfo)file); } files = files.OrderByDescending(o => o.LastAccessTime).ToList(); foreach (var file in files) {//取倒序匹配的文件名为工件号的文件 if (file.Name.Contains(wplog.WorkPieceID)) { var datatable = CSVHelper.ReadCSVList(file.FullName); List<string> rowFirst = new List<string>(); List<string> rowSecond = new List<string>(); if (datatable.Count == 2) { rowFirst = datatable[0].Split(',').ToList(); rowSecond = datatable[1].Split(',').ToList(); //给相应质量数据赋值 wplog.OP80NewCode = rowSecond[1]; wplog.QualityOP80To1 = rowFirst[13]; } else { wplog.Remarks = (wplog.Remarks ?? "") + $"OP80下线完成读取文件{file.FullName}异常，行数不是2行"; } } else { // public override string DataCapturePointCode // { // get { return _dataCaptureConfig.DataCapturePointCode; } // } // public override string DataCapturePointCname // { // get { return _dataCaptureConfig.DataCapturePointCname; } // } Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"OP80下线完成读取文件{file.FullName}不是指定工件{wplog.WorkPieceID}"); } } } } catch (Exception ex) { threadStatusMonitor.ErrorMsg = $" {RandomHelper.GenerateRandomCode(4)} 读取{DataCapturePointCode}下线标记 出现异常，请查看日志！"; Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"OP80下线完成读取文件数据时异常,避免工序完成异常：", ex); } //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); threadStatusMonitor.Threadstatue = 1; // public override void RefreshDataList(List<DataCaptureConfig> dataCaptureConfig) // { // } // public override void DataCaptureStart() // { // ThreadStatusMonitorMiddle threadStatusMonitor = new ThreadStatusMonitorMiddle(); // if (IsCaptureflag) // { // //var plcService = PLCManger.GetSinglePLCService(_dataCaptureConfig); // var plcService = SystemValue.GetPLCService(_dataCaptureConfig); // if (plcService == null) // { // threadStatusMonitor.ErrorMsg = $"{RandomHelper.GenerateRandomCode(4)} 没有找到{_dataCaptureConfig.WorkingProcedure}的PLC设备"; // return; // } // if (plcService != null && !plcService.IsConnected) // { // SystemValue.PLCServiceReconnect(plcService); // //plcService.Close(); // //plcService.OpenService(); // } // string Station = "03"; // string value_02 = ""; // string path = ConfigHelper.GetConfigString("OP30QualityDataForStation");//打码机打码二维码路径 // if(string.IsNullOrEmpty(path)) // { // path = @"Z:\"; // } // if(DataCapturePointCode.Contains("CH3")) // {//工位3 涨断力矩 // path = path + "kistler_crack"; // } // else if (DataCapturePointCode.Contains("CH4")) // {//工位4 预拧紧力矩 // path = path + "Bosch_Rexroth"; // } // else if (DataCapturePointCode.Contains("CH5")) // {//工位5 拧紧力矩 // path = path + "Bosch_Rexroth"; // } // else if (DataCapturePointCode.Contains("CH6")) // {//工位6 衬套压装力矩 // path = path + "kistler_bush"; // } //// 质量信息：涨断力矩... 预拧紧力矩 预拧紧角度 终拧紧力矩 终拧紧角度 ////kistler_crack 涨断力矩 工位3 涨断力矩（Y - Maximum） 质量结果（Result） ////kistler_bush 压装力矩 工位6 衬套压装力矩（Y - Maximum） 衬套压装位移（Block X） 质量结果（Result） ////Bosch_Rexroth /（Ch_0_1.csv / Ch_0_2.csv 两通道 同时取最新的（或者id对应？）） 预拧紧力矩工位4 预拧紧力矩（T + Nm） 质量结果（结果） 目前文件不能自动生成 博世 力士乐拧紧系统 ////Bosch_Rexroth /（Ch_0_3.csv / Ch_0_4.csv 两通道 同时取最新的（或者id对应？）） 终拧紧工位5 拧紧力矩（T + Nm） 终拧紧角度 // while (true) // { // threadStatusMonitor.ErrorMsg = ""; // threadStatusMonitor.Threadcode = DataCapturePointCode; // threadStatusMonitor.Threadcname = DataCapturePointCname; // threadStatusMonitor.Threadendtime = DateTime.Now; // //threadStatusMonitor.Threadlastmodifytime = DateTime.Now; // threadStatusMonitor.Threadstatue = 0; // threadStatusMonitor.ThreadId = Thread.CurrentThread.ManagedThreadId.ToString(); // try // { // //_dataCaptureConfig // if (plcService == null || !plcService.IsConnected) // { // threadStatusMonitor.ErrorMsg = $" {RandomHelper.GenerateRandomCode(4)} {_dataCaptureConfig.WorkingProcedure} PLC连接已断开，正在尝试打开!"; // WorkPieceInfoManager.ThreadMonitor(threadStatusMonitor); // SystemValue.PLCServiceReconnect(plcService); // //plcService.Close(); // //plcService.OpenService(); // Thread.Sleep(100); // continue; // } // else // { // var value = plcService.ReadValuePoint(_dataCaptureConfig.DbNumber, _dataCaptureConfig.Offset, PLCManger.GetTypeForString(_dataCaptureConfig.DataCaptureColumnType)); // if (value_02.ToUpper().Equals("FALSE") && value.ToString().ToUpper().Equals("TRUE")) // {//当上一标记位0，当前获取标记为1时， // //触发操作, 并给静态变量赋值为1 // //业务代码 // threadStatusMonitor.Threadlastmodifytime = DateTime.Now; // WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); // wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); // wplog.WorkingProcedure = WorkingProcedure; // wplog.EquipmentID = _dataCaptureConfig.EquipmentID; ; // wplog.Remarks = WorkingProcedure; // wplog.MonitoringPoint = DataCapturePointCode; // wplog.CreatedTime = DateTimeHelper.GetDateTime(); // wplog.CreatedUserName = DataCapturePointCode; // wplog.UpdatedUserName = Environment.MachineName+"自动" + Thread.CurrentThread.ManagedThreadId.ToString(); // wplog.UpdatedTime = DateTimeHelper.GetDateTime(); // wplog.IsDeleted = false; // wplog.QualityType = QualityType.Online.ToString(); // ////扫描共享目录并将新的文件扫描返回 一般节拍在15秒左右（可以确认一下） // ////扫描修改时间在上次扫描时间之前10秒到当前时间的之间的文件 // //var startTime = CommonManager.Instance.CheackPath(Environment.CurrentDirectory + $"\\LastModifyTime\\OP30Station{Station}-LastScapTime.txt", 6, -10); // //var endTime = DateTimeHelper.GetDateTime(); // //var newFiles = FileHelper.DetectNewFilesCSV(path, 10, Convert.ToDateTime(startTime), endTime); // //foreach (System.IO.FileInfo file in newFiles) // //{ // //} // foreach (var col in colConfig.Where(o => o.DataCapturePointCode == DataCapturePointCode)) // { // try // { // var valuecol = plcService.ReadValuePoint(col.DbNumber, col.Offset, col.DataCaptureColumnLength.Value, PLCManger.GetTypeForString(col.DataCaptureColumnType)); // //wplog.GetType().GetProperty(col.DataCaptureColumnTabelName).SetValue(wplog, valuecol);//给动态字段赋值 // var set = wplog.GetType().GetProperty(col.DataCaptureColumnTabelName); // if (set == null) // { // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序监控测量完成标记 读取工件码动态由于字段名没找到，赋值【{WorkingProcedure ?? "空字符串"}】失败{wplog.Id}"); // } // set.SetValue(wplog, valuecol);//给动态字段赋值 // } // catch (Exception setex) // { // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序监控测量完成标记 读取工件码动态赋值【{WorkingProcedure ?? "空字符串"}】异常{wplog.Id}", setex); // } // } // try // { // if (WorkingProcedure.Equals("OP80")) // { // //OP80 需要扫描文件读取质量信息 // //扫描修改时间在上次扫描时间之前60秒到当前时间的之间的文件 // List<FileInfo> files = new List<FileInfo>(); // var newFiles = FileHelper.DetectNewFilesCSV(path, 60, DateTimeHelper.GetDateTime(), DateTimeHelper.GetDateTime().AddHours(1)); // foreach (var file in newFiles) // { // files.Add((FileInfo)file); // } // files = files.OrderByDescending(o => o.LastAccessTime).ToList(); // foreach (var file in files) // {//取倒序匹配的文件名为工件号的文件 // if (file.Name.Contains(wplog.WorkPieceID)) // { // var datatable = CSVHelper.ReadCSVList(file.FullName); // List<string> rowFirst = new List<string>(); // List<string> rowSecond = new List<string>(); // if (datatable.Count == 2) // { // rowFirst = datatable[0].Split(',').ToList(); // rowSecond = datatable[1].Split(',').ToList(); // //给相应质量数据赋值 // wplog.OP80NewCode = rowSecond[1]; // wplog.QualityOP80To1 = rowFirst[13]; // } // else // { // wplog.Remarks = (wplog.Remarks ?? "") + $"OP80下线完成读取文件{file.FullName}异常，行数不是2行"; // } // } // else // { // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"OP80下线完成读取文件{file.FullName}不是指定工件{wplog.WorkPieceID}"); // } // } // } // } // catch (Exception ex) // { // threadStatusMonitor.ErrorMsg = $" {RandomHelper.GenerateRandomCode(4)} 读取{DataCapturePointCode}下线标记 出现异常，请查看日志！"; // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"OP80下线完成读取文件数据时异常,避免工序完成异常：", ex); // } // //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 // WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); // threadStatusMonitor.Threadstatue = 1; } value_02 = value.ToString(); // } // value_02 = value.ToString(); } threadStatusMonitor.Remarks = $"abcdefg:{RandomHelper.GenerateRandomCode(4)}"; if (!_dataCaptureConfig.DataCaptureFrequency.HasValue || _dataCaptureConfig.DataCaptureFrequency < 10) { threadStatusMonitor.ThreadFrequency = 5000; Thread.Sleep(5000); } else { threadStatusMonitor.ThreadFrequency = _dataCaptureConfig.DataCaptureFrequency.Value; Thread.Sleep(_dataCaptureConfig.DataCaptureFrequency.Value); } // } // threadStatusMonitor.Remarks = $"abcdefg:{RandomHelper.GenerateRandomCode(4)}"; // if (!_dataCaptureConfig.DataCaptureFrequency.HasValue || _dataCaptureConfig.DataCaptureFrequency < 10) // { // threadStatusMonitor.ThreadFrequency = 5000; // Thread.Sleep(5000); // } // else // { // threadStatusMonitor.ThreadFrequency = _dataCaptureConfig.DataCaptureFrequency.Value; // Thread.Sleep(_dataCaptureConfig.DataCaptureFrequency.Value); // } } catch (Exception ex) { threadStatusMonitor.ErrorMsg = $" {RandomHelper.GenerateRandomCode(4)} 读取{DataCapturePointCode}工序监控测量标记 出现异常，请查看日志！"; Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读取 {DataCapturePointCode}工序监控测量标记数据时异常：", ex); } finally { WorkPieceInfoManager.ThreadMonitor(threadStatusMonitor); } } } else { threadStatusMonitor.ErrorMsg = ""; threadStatusMonitor.Threadcode = DataCapturePointCode; threadStatusMonitor.Threadcname = DataCapturePointCname; threadStatusMonitor.Threadendtime = DateTime.Now; threadStatusMonitor.Threadlastmodifytime = DateTime.Now; threadStatusMonitor.Threadstatue = 0; threadStatusMonitor.ThreadId = Thread.CurrentThread.ManagedThreadId.ToString(); threadStatusMonitor.Remarks = $" {RandomHelper.GenerateRandomCode(4)} {DataCapturePointCode}工序监控测量标记 不做校验，请确认配置信息！"; WorkPieceInfoManager.ThreadMonitor(threadStatusMonitor); Log4NetHelper.WriteInfoLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读{DataCapturePointCode}工序监控测量标记 不做校验，请确认是否配置异常"); } } // } // catch (Exception ex) // { // threadStatusMonitor.ErrorMsg = $" {RandomHelper.GenerateRandomCode(4)} 读取{DataCapturePointCode}工序监控测量标记 出现异常，请查看日志！"; // Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读取 {DataCapturePointCode}工序监控测量标记数据时异常：", ex); // } // finally // { // WorkPieceInfoManager.ThreadMonitor(threadStatusMonitor); // } // } // } // else // { // threadStatusMonitor.ErrorMsg = ""; // threadStatusMonitor.Threadcode = DataCapturePointCode; // threadStatusMonitor.Threadcname = DataCapturePointCname; // threadStatusMonitor.Threadendtime = DateTime.Now; // threadStatusMonitor.Threadlastmodifytime = DateTime.Now; // threadStatusMonitor.Threadstatue = 0; // threadStatusMonitor.ThreadId = Thread.CurrentThread.ManagedThreadId.ToString(); // threadStatusMonitor.Remarks = $" {RandomHelper.GenerateRandomCode(4)} {DataCapturePointCode}工序监控测量标记 不做校验，请确认配置信息！"; // WorkPieceInfoManager.ThreadMonitor(threadStatusMonitor); // Log4NetHelper.WriteInfoLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读{DataCapturePointCode}工序监控测量标记 不做校验，请确认是否配置异常"); // } // } } } // } //} DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/DataCaptureHandlerV2/Special/DataCaptureHandler_OP1002.cs
@@ -151,6 +151,7 @@ //#endregion Log4NetHelper.WriteInfoLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" {DataCapturePointCode}工序测标记读取{DateTime.Now}***3****"); //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/DataCaptureHandlerV2/Special/DataCaptureHandler_OP1003.cs
@@ -154,6 +154,7 @@ //#endregion //更新WorkPieceInfo表以及插入WorkPieceLog表和WorkPieceInfoLog表 WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); threadStatusMonitor.Threadstatue = 1; DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_DataCaptureV3/FormMain.cs
@@ -737,150 +737,156 @@ /// <param name="e"></param> private void button8_Click(object sender, EventArgs e) { try { DataCaptureHandler.RefreshDataCommonStatic(); button8.Text = "模拟已启动"; button8.BackColor = Color.Green; SystemValue.isStartedImitateModel = true; #region 数据采集项确定 var dataCaptureConfigslist = DataCaptureConfigManager.GetDataCaptureConfigs(); var columnList = DataCaptureConfigManager.GetDataCaptureColumnConfig(); _dataCaptureHandler.Clear(); foreach (var config in dataCaptureConfigslist) { //try //{ // DataCaptureHandler.RefreshDataCommonStatic(); // button8.Text = "模拟已启动"; // button8.BackColor = Color.Green; // SystemValue.isStartedImitateModel = true; // #region 数据采集项确定 // var dataCaptureConfigslist = DataCaptureConfigManager.GetDataCaptureConfigs(); // var columnList = DataCaptureConfigManager.GetDataCaptureColumnConfig(); // _dataCaptureHandler.Clear(); // foreach (var config in dataCaptureConfigslist) // { switch (config.DataCapturePointCode) { #region HMI04 case "RHMIOP104001": case "RHMIOP2001": case "RHMIOP303501": case "RHMIOP5001": case "RHMIOP6001": HMI_WorkpieceReading.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(HMI_WorkpieceReading.Instance); break; case "WHMIOP104002": case "WHMIOP2002": case "WHMIOP303502": case "WHMIOP5002": case "WHMIOP6002": HMI_WorkpieceWrite.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(HMI_WorkpieceWrite.Instance); break; #endregion case "OP0501": DataCaptureHandler_OP0501.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP0501.Instance); break; case "OP2001": DataCaptureHandler_OP2001.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP2001.Instance); break; #region OP30 case "OP3001": DataCaptureHandler_OP3001.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3001.Instance); break; case "OP3002": DataCaptureHandler_OP3002.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3002.Instance); break; case "OP3003": DataCaptureHandler_OP3003.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3003.Instance); break; case "OP3004": DataCaptureHandler_OP3004.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3004.Instance); break; case "OP3005": DataCaptureHandler_OP3005.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3005.Instance); break; case "OP3006": DataCaptureHandler_OP3006.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3006.Instance); break; case "OP3007": DataCaptureHandler_OP3007.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3007.Instance); break; #endregion // switch (config.DataCapturePointCode) // { // #region HMI04 // case "RHMIOP104001": // case "RHMIOP2001": // case "RHMIOP303501": // case "RHMIOP5001": // case "RHMIOP6001": // HMI_WorkpieceReading.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(HMI_WorkpieceReading.Instance); // break; // case "WHMIOP104002": // case "WHMIOP2002": // case "WHMIOP303502": // case "WHMIOP5002": // case "WHMIOP6002": // HMI_WorkpieceWrite.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(HMI_WorkpieceWrite.Instance); // break; // #endregion // case "OP0501": // DataCaptureHandler_OP0501.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP0501.Instance); // break; // case "OP2001": // DataCaptureHandler_OP2001.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP2001.Instance); // break; // #region OP30 // case "OP3001": // DataCaptureHandler_OP3001.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3001.Instance); // break; // case "OP3002": // DataCaptureHandler_OP3002.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3002.Instance); // break; // case "OP3003": // DataCaptureHandler_OP3003.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3003.Instance); // break; // case "OP3004": // DataCaptureHandler_OP3004.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3004.Instance); // break; // case "OP3005": // DataCaptureHandler_OP3005.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3005.Instance); // break; // case "OP3006": // DataCaptureHandler_OP3006.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3006.Instance); // break; // case "OP3007": // DataCaptureHandler_OP3007.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3007.Instance); // break; // #endregion #region OP35 case "OP3501": DataCaptureHandler_OP3501.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3501.Instance); break; case "OP3502": DataCaptureHandler_OP3502.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3502.Instance); break; case "OP3503": DataCaptureHandler_OP3503.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3503.Instance); break; case "OP3504": DataCaptureHandler_OP3504.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3504.Instance); break; case "OP3505": DataCaptureHandler_OP3505.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3505.Instance); break; case "OP3506": DataCaptureHandler_OP3506.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3506.Instance); break; case "OP3507": DataCaptureHandler_OP3507.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP3507.Instance); break; #endregion // #region OP35 // case "OP3501": // DataCaptureHandler_OP3501.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3501.Instance); // break; // case "OP3502": // /* // DataCaptureHandler_OP3502.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3502.Instance); // //*/ // break; // case "OP3503": // DataCaptureHandler_OP3503.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3503.Instance); // break; // case "OP3504": // DataCaptureHandler_OP3504.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3504.Instance); // break; // case "OP3505": // DataCaptureHandler_OP3505.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3505.Instance); // break; // case "OP3506": // DataCaptureHandler_OP3506.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3506.Instance); // break; // case "OP3507": // DataCaptureHandler_OP3507.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP3507.Instance); // break; // #endregion #region OP80 case "OP8001": DataCaptureHandler_OP8001.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP8001.Instance); break; case "OP8002": DataCaptureHandler_OP8002.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP8002.Instance); break; case "OP8003": DataCaptureHandler_OP8003.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP8003.Instance); break; case "OP8004": DataCaptureHandler_OP8004.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP8004.Instance); break; case "OP8005": DataCaptureHandler_OP8005.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP8005.Instance); break; case "OP8006": DataCaptureHandler_OP8006.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP8006.Instance); break; case "OP8007": DataCaptureHandler_OP8007.Instance._dataCaptureConfig = config; _dataCaptureHandler.Add(DataCaptureHandler_OP8007.Instance); break; #endregion // #region OP80 // case "OP8001": // DataCaptureHandler_OP8001.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP8001.Instance); // break; // case "OP8002": // /* // DataCaptureHandler_OP8002.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP8002.Instance); // //*/ // break; // case "OP8003": // DataCaptureHandler_OP8003.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP8003.Instance); // break; // case "OP8004": // DataCaptureHandler_OP8004.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP8004.Instance); // break; // case "OP8005": // DataCaptureHandler_OP8005.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP8005.Instance); // break; // case "OP8006": // DataCaptureHandler_OP8006.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP8006.Instance); // break; // case "OP8007": // DataCaptureHandler_OP8007.Instance._dataCaptureConfig = config; // _dataCaptureHandler.Add(DataCaptureHandler_OP8007.Instance); // break; // #endregion } } #endregion // } // } // #endregion } catch (Exception ex) { Log4NetHelper.WriteErrorLog(LogType.FormMain, "启动线程时----btn_StartUpAllThread_Click all报错：", ex); } //} //catch (Exception ex) //{ // Log4NetHelper.WriteErrorLog(LogType.FormMain, "启动线程时----btn_StartUpAllThread_Click all报错：", ex); //} //**/ } private void button10_Click(object sender, EventArgs e) @@ -934,8 +940,8 @@ MessageBox.Show("请点击调试模式按钮"); return; } DataCaptureHandler.WorkPieceID = textBox10.Text.Trim(); DataCaptureHandler_OP3002.Instance.DataCaptureStart(); //DataCaptureHandler.WorkPieceID = textBox10.Text.Trim(); //DataCaptureHandler_OP3002.Instance.DataCaptureStart(); } catch (Exception ex) @@ -1140,22 +1146,22 @@ { try { if (!SystemValue.isStartedImitateModel) { MessageBox.Show("请点击调试模式按钮"); return; } DataCaptureHandler.WorkPieceID = textBox10.Text.Trim(); DataCaptureHandler_OP8002.Instance.DataCaptureStart(); //try //{ // if (!SystemValue.isStartedImitateModel) // { // MessageBox.Show("请点击调试模式按钮"); // return; // } // DataCaptureHandler.WorkPieceID = textBox10.Text.Trim(); // DataCaptureHandler_OP8002.Instance.DataCaptureStart(); } catch (Exception ex) { MessageBox.Show($"模拟异常：{ex.Message}"); Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex); } //} //catch (Exception ex) //{ // MessageBox.Show($"模拟异常：{ex.Message}"); // Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex); //} } private void button20_Click(object sender, EventArgs e) @@ -1353,6 +1359,11 @@ } /// <summary> /// 正式环境，使用该按钮启动线程！！！！ /// </summary> /// <param name="sender"></param> /// <param name="e"></param> private void button24_Click(object sender, EventArgs e) { @@ -1658,24 +1669,24 @@ try { var WorkingProcedure = "OP35"; var EquipmentID = "EOP35"; var DataCapturePointCode = "OP3502A"; //var DataCapturePointCode = "OP3002CH3"; WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); wplog.WorkingProcedure = WorkingProcedure; wplog.EquipmentID = EquipmentID; ; wplog.Remarks = WorkingProcedure; wplog.MonitoringPoint = DataCapturePointCode; wplog.WorkPieceID = "DZ045L2309080100181A1A"; wplog.CreatedTime = DateTimeHelper.GetDateTime(); wplog.CreatedUserName = DataCapturePointCode; wplog.UpdatedUserName = Environment.MachineName + "自动" + Thread.CurrentThread.ManagedThreadId.ToString(); wplog.UpdatedTime = DateTimeHelper.GetDateTime(); wplog.IsDeleted = false; wplog.QualityOP10To1 = "-500"; WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); //var WorkingProcedure = "OP35"; //var EquipmentID = "EOP35"; //var DataCapturePointCode = "OP3502A"; ////var DataCapturePointCode = "OP3002CH3"; //WorkPieceLogMiddle wplog = new WorkPieceLogMiddle(); //wplog.Id = Yitter.IdGenerator.YitIdHelper.NextId(); //wplog.WorkingProcedure = WorkingProcedure; //wplog.EquipmentID = EquipmentID; ; //wplog.Remarks = WorkingProcedure; //wplog.MonitoringPoint = DataCapturePointCode; //wplog.WorkPieceID = "DZ045L2309080100181A1A"; //wplog.CreatedTime = DateTimeHelper.GetDateTime(); //wplog.CreatedUserName = DataCapturePointCode; //wplog.UpdatedUserName = Environment.MachineName + "自动" + Thread.CurrentThread.ManagedThreadId.ToString(); //wplog.UpdatedTime = DateTimeHelper.GetDateTime(); //wplog.IsDeleted = false; //wplog.QualityOP10To1 = "-500"; //WorkPieceInfoManager.QualityInfoComplete(wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure)); //string path = ConfigHelper.GetConfigString("OP30QualityDataForStation");//打码机打码二维码路径 //if (string.IsNullOrEmpty(path)) DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_Test/UnitTest1.cs
@@ -13,6 +13,19 @@ [TestClass] public class UnitTest1 { [TestMethod] public void TestMetho22() { var aa = ""; WorkPieceInfo cur_db_info = new WorkPieceInfo() { WorkingProcedureCurrent = "OP05" }; WorkPieceInfoManager.SetWorkingProcedureCurrentForOP10(cur_db_info, ref aa); } [TestMethod] public void TestMethod1() {
