增加是否允许切纸

schangxiang@126.com

2024-12-03 761aaf597639c55c6f36b03f3a89ba2d49a1d3f4

 SDA/iWareSda/Devices/4-Station/StationModel/Station_CacheEntity.cs

@@ -1,6 +1,5 @@
using iWareCommon.Utils;
using iWareModel;
using iWareSda.Devices._3_Station.StationModel;
using System;
using System.Collections.Generic;
using System.Linq;
@@ -22,6 +21,11 @@
        public static string W_DBHeaderWithSeparate_BZ39 = "3002" + WareSdaStruct.PLCDBADDRESS_SEPARATE;
        public static string W_DBHeaderWithSeparate_BZ12 = "3003" + WareSdaStruct.PLCDBADDRESS_SEPARATE;
        public static string W_DBHeaderWithSeparate_BZ01 = "3001" + WareSdaStruct.PLCDBADDRESS_SEPARATE;
        public static string W_DBHeaderWithSeparate_BZ21 = "3004" + WareSdaStruct.PLCDBADDRESS_SEPARATE;
        public static string W_DBHeaderWithSeparate_BZ30 = "3005" + WareSdaStruct.PLCDBADDRESS_SEPARATE;

        public static string W_DBHeaderWithSeparate_269 = "3006" + WareSdaStruct.PLCDBADDRESS_SEPARATE;
        public static string W_DBHeaderWithSeparate_3007 = "3007" + WareSdaStruct.PLCDBADDRESS_SEPARATE;

        /// <summary>
        /// 读取DB
@@ -145,9 +149,12 @@
            //写入地址
            _dbBlockForWrite.W_StationForWriteCommList = new List<StationDBForWriteComm>();


            _dbBlockForWrite.W_StationForWriteCommList.Add(new StationDBForWriteComm()
            {
                StationCode = StationLocationEnum.首次扫码工位.ToString(),

                W_DataFinish = W_DBHeaderWithSeparate_269 + "0.0",
            });
            _dbBlockForWrite.W_StationForWriteCommList.Add(new StationDBForWriteComm()
            {
@@ -188,20 +195,39 @@

                W_DataFinish = W_DBHeaderWithSeparate_BZ12 + "0.0",
                W_EndMark = W_DBHeaderWithSeparate_BZ12 + "0.1",
                W_FirstMark = W_DBHeaderWithSeparate_BZ12 + "0.3",
                W_PalletizingPlaceX = W_DBHeaderWithSeparate_BZ12 + "12.0",
                W_PalletizingPlaceY = W_DBHeaderWithSeparate_BZ12 + "14.0",
                W_PalletizingPlaceZ = W_DBHeaderWithSeparate_BZ12 + "16.0",

                W_PalletizingTaskID = W_DBHeaderWithSeparate_BZ12 + "20.0",
                W_PalletizingTaskID = W_DBHeaderWithSeparate_BZ12 + "18.0",
                W_Rotate = W_DBHeaderWithSeparate_BZ12 + "8.0",

                W_Length = W_DBHeaderWithSeparate_BZ12 + "2.0",
                W_Width = W_DBHeaderWithSeparate_BZ12 + "4.0",
                W_Height = W_DBHeaderWithSeparate_BZ12 + "6.0",

                W_PalletizingBucketType = W_DBHeaderWithSeparate_BZ12 + "20.0",
                W_PalletizingStation = W_DBHeaderWithSeparate_BZ12 + "10.0",

                W_PalletizingTaskFinish = W_DBHeaderWithSeparate_BZ12 + "0.2",
            });

            _dbBlockForWrite.W_StationForWriteCommList.Add(new StationDBForWriteComm()
            {
                StationCode = StationLocationEnum.BZ21.ToString(),

                W_DataFinish = W_DBHeaderWithSeparate_BZ21 + "0.0",
                W_SurroundTaskFinish = W_DBHeaderWithSeparate_BZ21 + "0.1",
                W_X_Offset = W_DBHeaderWithSeparate_BZ21 + "10.0",
                W_Y_Offset = W_DBHeaderWithSeparate_BZ21 + "12.0",
                W_SurroundTaskNo = W_DBHeaderWithSeparate_BZ21 + "14.0",

                W_CartonHeight = W_DBHeaderWithSeparate_BZ21 + "6.0",
                W_CartonWidth = W_DBHeaderWithSeparate_BZ21 + "8.0",

                W_PackageLength = W_DBHeaderWithSeparate_BZ21 + "2.0",
                W_PackageWidth = W_DBHeaderWithSeparate_BZ21 + "4.0",

            });
            return _dbBlockForWrite;
        }

@@ -222,6 +248,22 @@
                R_StationForReadCommList = new List<StationDBForReadComm>()
                #endregion
            };


            _dbBlockForRead.R_StationForReadCommList.Add(new StationDBForReadComm()
            {
                StationCode = StationLocationEnum.BZ3007.ToString(),

                R_AllowCut = W_DBHeaderWithSeparate_3007 + "0.0",
            });

            _dbBlockForRead.R_StationForReadCommList.Add(new StationDBForReadComm()
            {
                StationCode = StationLocationEnum.首次扫码工位.ToString(),

                R_ReqParseData = W_DBHeaderWithSeparate_269 + "50.0",
                R_ReadCodeResult = W_DBHeaderWithSeparate_269 + "52.0",
            });

            _dbBlockForRead.R_StationForReadCommList.Add(new StationDBForReadComm()
            {
@@ -256,17 +298,37 @@

                R_ReqParseData = W_DBHeaderWithSeparate_BZ12 + "50.0",
                R_PalletizingFinish = W_DBHeaderWithSeparate_BZ12 + "50.1",
                R_PalletizingTaskNo = W_DBHeaderWithSeparate_BZ12 + "50.2",
                R_PalletizingTaskNo = W_DBHeaderWithSeparate_BZ12 + "108.0",
                R_ReadCodeResult = W_DBHeaderWithSeparate_BZ12 + "52.0",
                R_PalletizingStation1 = W_DBHeaderWithSeparate_BZ12 + "104.0",
                R_PalletizingStation2 = W_DBHeaderWithSeparate_BZ12 + "106.0",

                R_PalletizingAck = W_DBHeaderWithSeparate_BZ12 + "50.2",
                //R_Inbound_TaskID = W_DBHeaderWithSeparate_BZ12 + "112.0",
                //R_Outbound_TaskID = W_DBHeaderWithSeparate_BZ12 + "114.0",

            });
            _dbBlockForRead.R_StationForReadCommList.Add(new StationDBForReadComm()
            {
                StationCode = StationLocationEnum.BZ21.ToString(),
                R_PalletizingAck = W_DBHeaderWithSeparate_BZ21 + "50.2",

                R_ReqParseData = W_DBHeaderWithSeparate_BZ21 + "50.0",
                R_SurrouondTaskFinish = W_DBHeaderWithSeparate_BZ21 + "50.1",
                R_SurrouondTaskNo = W_DBHeaderWithSeparate_BZ21 + "104.0",
                R_ReadCodeResult = W_DBHeaderWithSeparate_BZ21 + "52.0",

            });
            _dbBlockForRead.R_StationForReadCommList.Add(new StationDBForReadComm()
            {
                StationCode = StationLocationEnum.BZ30.ToString(),
                R_PalletizingAck = W_DBHeaderWithSeparate_BZ21 + "50.2",

                R_ReqParseData = W_DBHeaderWithSeparate_BZ21 + "50.0",
                R_SurrouondTaskFinish = W_DBHeaderWithSeparate_BZ21 + "50.1",
                R_SurrouondTaskNo = W_DBHeaderWithSeparate_BZ21 + "104.0",
                R_ReadCodeResult = W_DBHeaderWithSeparate_BZ21 + "52.0",

            });
            return _dbBlockForRead;

        }