//处理OP30的数据

schangxiang@126.com

2024-09-02 f0826424c58f3e925a77437111a2e06808bfff26

 DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_DataCaptureV3/FormMain.cs

@@ -912,22 +912,22 @@
        private void button9_Click(object sender, EventArgs e)
        {

            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3001.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3001.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button11_Click(object sender, EventArgs e)
@@ -955,85 +955,85 @@
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3003.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3003.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button15_Click(object sender, EventArgs e)
        {

            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3007.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3007.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button13_Click(object sender, EventArgs e)
        {

            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3004.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3004.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button14_Click(object sender, EventArgs e)
        {

            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3005.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3005.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button16_Click(object sender, EventArgs e)
@@ -1124,22 +1124,22 @@
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8001.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8001.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button21_Click(object sender, EventArgs e)
@@ -1168,88 +1168,88 @@
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8003.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8003.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button19_Click(object sender, EventArgs e)
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8004.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8004.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button18_Click(object sender, EventArgs e)
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8005.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8005.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button17_Click(object sender, EventArgs e)
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8007.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8007.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        /// <summary>
@@ -1991,98 +1991,98 @@

        }

        public WorkPieceLogMiddle GetCH5Info(string FullName, WorkPieceLogMiddle wplog)
        {
            try
            {
                string fileContent = File.ReadAllText(FullName);
                string[] lines2 = fileContent.Split('\n');
                bool IDCodeIndex = false;
                int Mcount = 0;
                int i = 0;
                int count = 0;
                foreach (string line in lines2)
                {
                    count++;
                    if (count == 4)
                    {//获取质量结果
                        var list = line.Split(' ');
                        if (list.Count() > 0)
                        {
                            var str = list[list.Count() - 1].ToString().Trim();
                            wplog.QualityStateStr = str.Equals("OK") ? "OK" : "NG";
                        }
                    }
                    // 处理每一行的逻辑
                    if (line.Contains("ID-Code"))//两个拧紧，每个前面都有ID-Code
                    {
                        i++;
                        IDCodeIndex = true;
                        Mcount = 0;
                    }
                    if (IDCodeIndex)
                    {
                        if (line.Contains(" M "))//第三个M行是拧紧数据
                        {//最终力矩
                            Mcount++;
                            if (Mcount == 3)
                            {
                                var str = line.Replace("+", "").Replace("-", "");
                                var list = str.Split('M');
                                if (list.Count() == 4)
                                {
                                    if (i == 1)
                                    {//CH3
                                        wplog.QualityOP30To3 = list[2].ToString().Trim();
                                    }
                                    else
                                    {//CH4
                                        wplog.QualityOP30To9 = list[2].ToString().Trim();
                                    }
                                }
                                IDCodeIndex = false;
                            }
                        }
        //public WorkPieceLogMiddle GetCH5Info(string FullName, WorkPieceLogMiddle wplog)
        //{
        //    try
        //    {
        //        string fileContent = File.ReadAllText(FullName);
        //        string[] lines2 = fileContent.Split('\n');
        //        bool IDCodeIndex = false;
        //        int Mcount = 0;
        //        int i = 0;
        //        int count = 0;
        //        foreach (string line in lines2)
        //        {
        //            count++;
        //            if (count == 4)
        //            {//获取质量结果
        //                var list = line.Split(' ');
        //                if (list.Count() > 0)
        //                {
        //                    var str = list[list.Count() - 1].ToString().Trim();
        //                    wplog.QualityStateStr = str.Equals("OK") ? "OK" : "NG";
        //                }
        //            }
        //            // 处理每一行的逻辑
        //            if (line.Contains("ID-Code"))//两个拧紧，每个前面都有ID-Code
        //            {
        //                i++;
        //                IDCodeIndex = true;
        //                Mcount = 0;
        //            }
        //            if (IDCodeIndex)
        //            {
        //                if (line.Contains(" M "))//第三个M行是拧紧数据
        //                {//最终力矩
        //                    Mcount++;
        //                    if (Mcount == 3)
        //                    {
        //                        var str = line.Replace("+", "").Replace("-", "");
        //                        var list = str.Split('M');
        //                        if (list.Count() == 4)
        //                        {
        //                            if (i == 1)
        //                            {//CH3
        //                                wplog.QualityOP30To3 = list[2].ToString().Trim();
        //                            }
        //                            else
        //                            {//CH4
        //                                wplog.QualityOP30To9 = list[2].ToString().Trim();
        //                            }
        //                        }
        //                        IDCodeIndex = false;
        //                    }
        //                }

                    }
                    if (line.Contains(" MWSP "))
                    {//终拧紧力矩  终拧紧角度
                        var list = line.Split(new String[] { " MWS " }, StringSplitOptions.None);
                        if (list.Count() == 2)
                        {
                            if (i == 1)
                            {//CH3
                                wplog.QualityOP30To4 = list[1].ToString().Trim();
                            }
                            else
                            {//CH4
                                wplog.QualityOP30To10 = list[1].ToString().Trim();
                            }
                            var list2 = list[0].Split(new String[] { " W " }, StringSplitOptions.None);
                            if (list2.Count() == 2)
                            {
                                var str = list2[1].ToString();
                                if (i == 1)
                                {//CH3
                                    wplog.QualityOP30To5 = str.Substring(0, str.IndexOf("MWSP")).Trim();
                                }
                                else
                                {//CH4
                                    wplog.QualityOP30To11 = str.Substring(0, str.IndexOf("MWSP")).Trim();
                                }
                            }
                        }
        //            }
        //            if (line.Contains(" MWSP "))
        //            {//终拧紧力矩  终拧紧角度
        //                var list = line.Split(new String[] { " MWS " }, StringSplitOptions.None);
        //                if (list.Count() == 2)
        //                {
        //                    if (i == 1)
        //                    {//CH3
        //                        wplog.QualityOP30To4 = list[1].ToString().Trim();
        //                    }
        //                    else
        //                    {//CH4
        //                        wplog.QualityOP30To10 = list[1].ToString().Trim();
        //                    }
        //                    var list2 = list[0].Split(new String[] { " W " }, StringSplitOptions.None);
        //                    if (list2.Count() == 2)
        //                    {
        //                        var str = list2[1].ToString();
        //                        if (i == 1)
        //                        {//CH3
        //                            wplog.QualityOP30To5 = str.Substring(0, str.IndexOf("MWSP")).Trim();
        //                        }
        //                        else
        //                        {//CH4
        //                            wplog.QualityOP30To11 = str.Substring(0, str.IndexOf("MWSP")).Trim();
        //                        }
        //                    }
        //                }

                    }
                }
            }
            catch (Exception ex)
            {
                //Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读取 {DataCapturePointCode}CH5工位质量数据异常工件号：{(wplog.WorkPieceID == null ? "" : wplog.WorkPieceID)} 文件名：{FullName}：", ex);
            }
            return wplog;
        //            }
        //        }
        //    }
        //    catch (Exception ex)
        //    {
        //        //Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读取 {DataCapturePointCode}CH5工位质量数据异常工件号：{(wplog.WorkPieceID == null ? "" : wplog.WorkPieceID)} 文件名：{FullName}：", ex);
        //    }
        //    return wplog;

        }
        //}
        private void button27_Click(object sender, EventArgs e)
        {
            try