重置不合格原因，当新建工序时

schangxiang@126.com

2024-08-28 b249dbdaefbe42bc054533c9ebfbfd58fab33885

 DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/BLL/WorkPieceInfoManager.cs

@@ -182,7 +182,7 @@
                            }
                            else
                            {
                                info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
                                info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值 //默认合格，OP05默认是合格
                                info.Remarks = "OP05新增工件信息";
                            }
                            info.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();
@@ -214,38 +214,54 @@
                        info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
                        info.Remarks = info.Remarks ?? "" + $"{info.WorkingProcedureCurrent}工件上线";

                        //修复下 op35 同一个件 下线时间跟下一个上线时间一模一样的问题  【Editby shaocx,2024-08-27】
                        var isNeedAddNewProcess = true;
                        var pro = db.WorkPieceProcess.Where(o => o.WorkPieceID == loginfo.WorkPieceID && !o.OperationType.Equals("SPC") && (o.EndTime == null || o.EndTime <= DateTime.MinValue)).OrderByDescending(o => o.StartTime).FirstOrDefault();
                        if (pro != null && pro.WorkPieceID.Length > 1)
                        {
                            pro.EndTime = DateTimeHelper.GetDateTime();
                            pro.UpdatedUserName = loginfo.MonitoringPoint;
                            pro.UpdatedTime = DateTimeHelper.GetDateTime();
                            pro.Remarks = (pro.Remarks ?? "") + "又一次上线，更新结束时间";
                            if (pro.WorkingProcedureCurrent == loginfo.WorkingProcedure)
                            {//表示工序相同
                                isNeedAddNewProcess = false;
                                pro.Remarks = (pro.Remarks ?? "") + "又一次上线，更新结束时间";
                            }
                            else
                            {
                                pro.EndTime = DateTimeHelper.GetDateTime();
                                pro.UpdatedUserName = loginfo.MonitoringPoint;
                                pro.UpdatedTime = DateTimeHelper.GetDateTime();
                                pro.Remarks = (pro.Remarks ?? "") + "又一次上线，更新结束时间";
                            }
                        }
                        //每次扫描上线都插入追溯表
                        WorkPieceProcess process = new WorkPieceProcess();
                        process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
                        process.StartTime = DateTimeHelper.GetDateTime();

                        process.QualityState = info.QualityState.HasValue ? info.QualityState.Value : (int)QualityState.OK;

                        if (process.WorkingProcedureCurrent == WorkingProcedureForHMI.OP70.ToString())
                        { //特殊处理OP70，因为OP70没有测量，默认合格 [Editby shaocx,2024-07-03]
                            process.QualityState = (int)QualityState.OK;
                        }

                        process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
                        process.CreatedUserName = loginfo.MonitoringPoint;
                        process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
                        process.UpdatedUserName = loginfo.MonitoringPoint;
                        process.UpdatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
                        process.OperationType = OperationType.生产.ToString();
                        process.Remarks = "";
                        if (loginfo.WorkingProcedure.Equals("OP05"))
                        if (isNeedAddNewProcess)
                        {
                            process.EndTime = process.StartTime;
                            //每次扫描上线都插入追溯表
                            WorkPieceProcess new_process = new WorkPieceProcess();
                            new_process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
                            QualityStateHelper.ResetQualityNoOkForNewProcess(ref new_process);
                            new_process.StartTime = DateTimeHelper.GetDateTime();

                            //不再默认赋值为合格 【Editby shaocx,2024-08-16】
                            //process.QualityState = info.QualityState.HasValue ? info.QualityState.Value : (int)QualityState.OK;//默认合格，已处理
                            new_process.QualityState = GetQualityStateValue(info.QualityState);

                            if (new_process.WorkingProcedureCurrent == WorkingProcedureForHMI.OP70.ToString())
                            { //特殊处理OP70，因为OP70没有测量，默认合格 [Editby shaocx,2024-07-03]
                                new_process.QualityState = (int)QualityState.OK;//默认合格，OP70默认是合格
                            }

                            new_process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
                            new_process.CreatedUserName = loginfo.MonitoringPoint;
                            new_process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
                            new_process.UpdatedUserName = loginfo.MonitoringPoint;
                            new_process.UpdatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
                            new_process.OperationType = OperationType.生产.ToString();
                            new_process.Remarks = "";
                            if (loginfo.WorkingProcedure.Equals("OP05"))
                            {
                                new_process.EndTime = new_process.StartTime;
                            }
                            db.WorkPieceProcess.Add(new_process);
                        }
                        db.WorkPieceProcess.Add(process);

                        //db.Database.AutoTransactionsEnabled = false;// 同一个SaveChanges默认事务， 关闭默认事务：... 好像不能用啊，后面再研究吧
                        if (isAddWorkPieceInfo)
@@ -467,6 +483,9 @@
        /// <param name="type"></param>
        public static void QualityInfoComplete(WorkPieceLogMiddle logMiddle, LogType type)
        {
            //根据质量数据判断是否合格/不合格 【Editby shaocx,2024-06-25】
            WorkPieceInfoManager.SetLogMiddleForQuality(ref logMiddle);

            //此处同时插入了WorkPieceLog，WorkPieceInfoLog表，并新增或修改WorkPieceInfo表
            //插入质量相关表QualityDataInfo

@@ -497,7 +516,7 @@
                                }
                                else
                                {
                                    pieceInfo.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
                                    pieceInfo.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值 //默认合格，OP05默认是合格
                                    pieceInfo.Remarks = "OP05新增工件信息";
                                }
                                pieceInfo.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();
@@ -720,8 +739,14 @@

                            WorkPieceProcess process = new WorkPieceProcess();
                            process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(pieceInfo);
                            QualityStateHelper.ResetQualityNoOkForNewProcess(ref process);
                            process.StartTime = DateTimeHelper.GetDateTime();
                            process.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : (int)QualityState.OK;

                            //不再默认赋值为合格 【Editby shaocx,2024-08-16】
                            //process.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : (int)QualityState.OK;//默认合格，已处理
                            process.QualityState = WorkPieceInfoManager.GetQualityStateValue(pieceInfo.QualityState);


                            //记录质量不合格原因 【Editby shaocx,2024-06-26】
                            //赋值不合格原因
                            SetQualityNoOk_WorkPieceProcess(logMiddle, ref process);
@@ -741,7 +766,11 @@
                            pro.QualityDataInfoID = qualityData.Id;
                            pro.UpdatedUserName = ResetUpdatedUserName(logMiddle);
                            pro.UpdatedTime = DateTimeHelper.GetDateTime();
                            pro.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : 9;

                            //不再默认赋值为合格 【Editby shaocx,2024-08-16】
                            //pro.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : 9;
                            pro.QualityState = WorkPieceInfoManager.GetQualityStateValue(pieceInfo.QualityState);

                            //赋值不合格原因
                            SetQualityNoOk_WorkPieceProcess(logMiddle, ref pro);

@@ -793,6 +822,74 @@
        }

        /// <summary>
        /// 质量检测完成-OP70专用
        /// </summary>
        /// <param name="logMiddle"></param>
        /// <param name="type"></param>
        public static void QualityInfoCompleteForOP70(WorkPieceLogMiddle logMiddle, LogType type)
        {
            if (string.IsNullOrEmpty(logMiddle.QualityOP70To1) && string.IsNullOrEmpty(logMiddle.QualityOP70To2) && string.IsNullOrEmpty(logMiddle.QualityOP70To3))
            {
                Log4NetHelper.WriteErrorLog(type, $" {logMiddle.WorkingProcedure}工序监控清洗机数据 读取工件码数据[{logMiddle.WorkPieceID ?? "空"}]获取的三个值都是空的，不处理返回");
                return;
            }
            using (DbModel db = new DbModel())
            {
                try
                {
                    bool isAdd = false;
                    if (logMiddle.WorkPieceID.Length == 22)
                    {
                        var qualityData = db.QualityDataInfo.Where(o => o.WorkPieceID == logMiddle.WorkPieceID).FirstOrDefault();
                        if (qualityData == null || qualityData.WorkPieceID.Length < 1 || qualityData.WorkingProcedure.Length < 1)
                        {//插入QualityDataInfo表
                            isAdd = true;
                            qualityData = EntityPropHelper.Mapper<QualityDataInfo, WorkPieceLog>(logMiddle);
                        }

                        qualityData.QualityStateUpdateUser = "OP7009";
                        qualityData.QualityReceiveTime = DateTime.Now;

                        //特殊处理OP70的质量数据
                        if (string.IsNullOrEmpty(qualityData.QualityOP70To1) && !string.IsNullOrEmpty(SystemHelper.GetStrForQualityOP70(logMiddle.QualityOP70To1)))
                        {
                            qualityData.QualityOP70To1 = logMiddle.QualityOP70To1;
                        }
                        if (string.IsNullOrEmpty(qualityData.QualityOP70To2) && !string.IsNullOrEmpty(SystemHelper.GetStrForQualityOP70(logMiddle.QualityOP70To2)))
                        {
                            qualityData.QualityOP70To2 = logMiddle.QualityOP70To2;
                        }
                        if (string.IsNullOrEmpty(qualityData.QualityOP70To3) && !string.IsNullOrEmpty(SystemHelper.GetStrForQualityOP70(logMiddle.QualityOP70To3)))
                        {
                            qualityData.QualityOP70To3 = logMiddle.QualityOP70To3;
                        }


                        db.QualityDataInfoLog.Add(GetAddQualityDataInfoLog(qualityData));//插入日志

                        if (isAdd)
                        {
                            db.QualityDataInfo.Add(GetAddQualityDataInfo(qualityData));
                        }
                        db.SaveChanges();//保存数据
                    }
                    else
                    {
                        Log4NetHelper.WriteErrorLog(type, $" {logMiddle.WorkingProcedure}工序监控清洗机数据 读取工件码数据[{logMiddle.WorkPieceID ?? "空"}]时异常：");

                    }
                }
                catch (Exception ex)
                {
                    Log4NetHelper.WriteErrorLog(type, $" {logMiddle.WorkingProcedure}工序监控清洗机数据 读取工件码数据[{logMiddle.WorkPieceID ?? "空"}]时异常：", ex);
                }
                finally
                {
                }
            }
        }

        /// <summary>
        /// 赋值 修改人 【Editby shaocx,2024-07-05】
        /// </summary>
        /// <param name="logMiddle"></param>
@@ -821,9 +918,9 @@
                {
                    if (loginfo.WorkPieceID != null && loginfo.WorkPieceID.Trim('\0').Length == 22)
                    {
                        WorkPieceInfo info = new WorkPieceInfo();
                        info = db.WorkPieceInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
                        if (info == null || info.WorkPieceID.Length < 1)
                        WorkPieceInfo cur_db_info = new WorkPieceInfo();
                        cur_db_info = db.WorkPieceInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
                        if (cur_db_info == null || cur_db_info.WorkPieceID.Length < 1)
                        {//没有工件信息，不做更新
                            Log4NetHelper.WriteErrorLog(type, $"工件{loginfo.WorkPieceID} 工件推出工序{loginfo.WorkingProcedure} 没有获取到工件信息不做更新");
                            return;
@@ -832,43 +929,60 @@
                        {//更新表WorkPieceInfo
                            if (loginfo.WorkingProcedure.Equals("OP10"))
                            {
                                /*
                                info.WorkPieceCurrentPosition = info.WorkingProcedureCurrent + "NOOK";
                                //var WorkingProcedure = (loginfo.MonitoringPoint.Equals("OP1002") ? "OP10" : "OP40");
                                loginfo2.WorkingProcedure = info.WorkingProcedureCurrent;//解决OP10，OP40同一个的问题
                                loginfo.WorkingProcedure = info.WorkingProcedureCurrent; //解决OP10，OP40同一个的问题
                                //*/
                                //修复 错误记录成OP05的问题 【Editby shaocx,2024-08-26】
                                var set_WorkingProcedureCurrent = "";
                                if (cur_db_info.WorkingProcedureCurrent != "OP10" && cur_db_info.WorkingProcedureCurrent != "OP40")
                                {
                                    SetWorkingProcedureCurrentForOP10(cur_db_info, ref set_WorkingProcedureCurrent);
                                }
                                else
                                {
                                    set_WorkingProcedureCurrent = cur_db_info.WorkingProcedureCurrent;
                                }
                                cur_db_info.WorkingProcedureCurrent = set_WorkingProcedureCurrent;
                                cur_db_info.WorkPieceCurrentPosition = set_WorkingProcedureCurrent + "NOOK";
                                loginfo2.WorkingProcedure = set_WorkingProcedureCurrent;//解决OP10，OP40同一个的问题
                                loginfo.WorkingProcedure = set_WorkingProcedureCurrent; //解决OP10，OP40同一个的问题
                            }
                            else
                            {
                                info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
                                info.WorkPieceCurrentPosition = loginfo.WorkingProcedure + "NOOK";
                                cur_db_info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
                                cur_db_info.WorkPieceCurrentPosition = loginfo.WorkingProcedure + "NOOK";
                            }
                            info.WorkPieceState = (int)WorkPieceState.NOOKPush;
                            info.UpdatedUserName = loginfo.MonitoringPoint;
                            info.UpdatedTime = DateTime.Now;
                            info.Remarks = "工件NOOK推出";
                            if (!(info.WorkingProcedureStartTime.HasValue && info.WorkingProcedureStartTime > DateTime.Parse("1900/01/01")))
                            cur_db_info.WorkPieceState = (int)WorkPieceState.NOOKPush;
                            cur_db_info.UpdatedUserName = loginfo.MonitoringPoint;
                            cur_db_info.UpdatedTime = DateTime.Now;
                            cur_db_info.Remarks = "工件NOOK推出";
                            if (!(cur_db_info.WorkingProcedureStartTime.HasValue && cur_db_info.WorkingProcedureStartTime > DateTime.Parse("1900/01/01")))
                            {
                                info.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();
                                cur_db_info.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();
                            }
                            info.WorkingProcedureEndTime = DateTimeHelper.GetDateTime();
                            info.WorkingProcedureCompleted = info.WorkingProcedureCompleted + loginfo.WorkingProcedure;//已完成工序
                            info.WorkPieceCurrentPositionOrder = info.WorkingProcedurePlan.IndexOf(loginfo.WorkingProcedure) / 2;
                            cur_db_info.WorkingProcedureEndTime = DateTimeHelper.GetDateTime();
                            cur_db_info.WorkingProcedureCompleted = cur_db_info.WorkingProcedureCompleted + loginfo.WorkingProcedure;//已完成工序
                            cur_db_info.WorkPieceCurrentPositionOrder = cur_db_info.WorkingProcedurePlan.IndexOf(loginfo.WorkingProcedure) / 2;
                        }
                        QualityDataInfo qualityData = null;
                        qualityData = db.QualityDataInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
                        if (loginfo.WorkingProcedure.Equals("OP35"))
                        {//为了解决OP35的采集到的质量信息是OK还NOOK的情况，OP35 NOOK时更新质量信息
                            loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"OP35NOOK原质量信息{(info.QualityState.HasValue ? info.QualityState.Value.ToString() : "空")}";
                            info.QualityState = (int)QualityState.NG;
                            if (!info.QualityState.Equals(((int)QualityState.OK).ToString()))
                            loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"OP35NOOK原质量信息{(cur_db_info.QualityState.HasValue ? cur_db_info.QualityState.Value.ToString() : "空")}";
                            cur_db_info.QualityState = (int)QualityState.NG;
                            if (!cur_db_info.QualityState.Equals(((int)QualityState.OK).ToString()))
                            {
                                info.QualityErrorInfo = $"{loginfo.WorkingProcedure}工序质量NOOK采集数据不合格{info.QualityState}";
                                cur_db_info.QualityErrorInfo = $"{loginfo.WorkingProcedure}工序质量NOOK采集数据不合格{cur_db_info.QualityState}";
                            }
                            else
                            {
                                info.QualityErrorInfo = "";
                                cur_db_info.QualityErrorInfo = "";
                            }
                            loginfo.QualityState = info.QualityState;
                            loginfo.QualityState = cur_db_info.QualityState;

                            var qualityData = db.QualityDataInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();

                            if (qualityData != null)
                            {
                                qualityData.OP35QualityState = loginfo.QualityState.HasValue ? loginfo.QualityState.Value.ToString() : "3";
@@ -886,7 +1000,9 @@
                            pro.UpdatedTime = DateTimeHelper.GetDateTime();
                        }

                        db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(info));
                        QualityStateHelper.SetQualityStateForNoOk(ref cur_db_info, ref pro, ref qualityData);

                        db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(cur_db_info));

                    }
                    else
@@ -924,9 +1040,9 @@
                        //|| !((loginfo.WorkingProcedure.Equals("OP10") || loginfo.WorkingProcedure.Equals("OP40")) && loginfo.Remarks.Length > 0)
                        )
                    {
                        WorkPieceInfo info = new WorkPieceInfo();
                        info = db.WorkPieceInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
                        if (info == null || info.WorkPieceID.Length < 1)
                        WorkPieceInfo cur_db_info = new WorkPieceInfo();
                        cur_db_info = db.WorkPieceInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
                        if (cur_db_info == null || cur_db_info.WorkPieceID.Length < 1)
                        {//没有工件信息，不做更新
                            loginfo2.Remarks = $"工件{loginfo.WorkPieceID} 工件SPC推出工序{loginfo.WorkingProcedure} 没有获取到工件信息不做更新";
                            Log4NetHelper.WriteErrorLog(type, $"工件{loginfo.WorkPieceID} 工件SPC推出工序{loginfo.WorkingProcedure} 没有获取到工件信息不做更新");
@@ -936,33 +1052,44 @@
                        {//更新表WorkPieceInfo
                            if (loginfo.WorkingProcedure.Equals("OP10"))
                            {
                                info.WorkPieceCurrentPosition = info.WorkingProcedureCurrent + "SPC";
                                //var WorkingProcedure = (loginfo.MonitoringPoint.Equals("OP1002") ? "OP10" : "OP40");
                                loginfo2.WorkingProcedure = info.WorkingProcedureCurrent;//解决OP10，OP40同一个的问题
                                loginfo.WorkingProcedure = info.WorkingProcedureCurrent; //解决OP10，OP40同一个的问题
                                //修复 错误记录成OP05的问题 【Editby shaocx,2024-08-26】
                                var set_WorkingProcedureCurrent = "";
                                if (cur_db_info.WorkingProcedureCurrent != "OP10" && cur_db_info.WorkingProcedureCurrent != "OP40")
                                {
                                    SetWorkingProcedureCurrentForOP10(cur_db_info, ref set_WorkingProcedureCurrent);
                                }
                                else
                                {
                                    set_WorkingProcedureCurrent = cur_db_info.WorkingProcedureCurrent;
                                }
                                cur_db_info.WorkingProcedureCurrent = set_WorkingProcedureCurrent;
                                cur_db_info.WorkPieceCurrentPosition = set_WorkingProcedureCurrent + "SPC";
                                loginfo2.WorkingProcedure = set_WorkingProcedureCurrent;//解决OP10，OP40同一个的问题
                                loginfo.WorkingProcedure = set_WorkingProcedureCurrent; //解决OP10，OP40同一个的问题
                            }
                            else
                            {
                                info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
                                info.WorkPieceCurrentPosition = loginfo.WorkingProcedure + "SPC";
                                cur_db_info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
                                cur_db_info.WorkPieceCurrentPosition = loginfo.WorkingProcedure + "SPC";
                            }
                            info.WorkPieceState = (int)WorkPieceState.SPCPush;
                            info.UpdatedUserName = loginfo.MonitoringPoint;
                            info.UpdatedTime = DateTime.Now;
                            info.WorkingProcedureEndTime = DateTimeHelper.GetDateTime();
                            if (!(info.WorkingProcedureStartTime.HasValue && info.WorkingProcedureStartTime > DateTime.Parse("1900/01/01")))
                            cur_db_info.WorkPieceState = (int)WorkPieceState.SPCPush;
                            cur_db_info.UpdatedUserName = loginfo.MonitoringPoint;
                            cur_db_info.UpdatedTime = DateTime.Now;
                            cur_db_info.WorkingProcedureEndTime = DateTimeHelper.GetDateTime();
                            if (!(cur_db_info.WorkingProcedureStartTime.HasValue && cur_db_info.WorkingProcedureStartTime > DateTime.Parse("1900/01/01")))
                            {
                                info.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();
                                cur_db_info.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();
                            }


                            info.WorkingProcedureCompleted = info.WorkingProcedureCompleted + loginfo.WorkingProcedure;//已完成工序
                            info.WorkPieceCurrentPositionOrder = info.WorkingProcedurePlan.IndexOf(loginfo.WorkingProcedure) / 2;
                            cur_db_info.WorkingProcedureCompleted = cur_db_info.WorkingProcedureCompleted + loginfo.WorkingProcedure;//已完成工序
                            cur_db_info.WorkPieceCurrentPositionOrder = cur_db_info.WorkingProcedurePlan.IndexOf(loginfo.WorkingProcedure) / 2;
                        }
                        info.Remarks = "工件SPC抽检推出";
                        cur_db_info.Remarks = "工件SPC抽检推出";

                        //更新上一工序的结束时间
                        var pro = db.WorkPieceProcess.Where(o => o.WorkPieceID == loginfo.WorkPieceID && o.WorkingProcedureCurrent == loginfo.WorkingProcedure && o.OperationType == OperationType.生产.ToString()).OrderByDescending(o => o.StartTime).FirstOrDefault();
                        var pro = db.WorkPieceProcess.Where(o => o.WorkPieceID == loginfo.WorkPieceID && o.WorkingProcedureCurrent == loginfo.WorkingProcedure
                        && o.OperationType == OperationType.生产.ToString()).OrderByDescending(o => o.StartTime).FirstOrDefault();
                        if (pro != null && pro.WorkPieceID.Length > 0)
                        {
                            pro.EndTime = DateTimeHelper.GetDateTime();
@@ -972,7 +1099,8 @@
                        }
                        //每次SPC 都插入追溯表
                        WorkPieceProcess process = new WorkPieceProcess();
                        process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
                        process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(cur_db_info);
                        QualityStateHelper.ResetQualityNoOkForNewProcess(ref process);
                        process.StartTime = DateTimeHelper.GetDateTime();
                        process.OperationType = OperationType.SPC.ToString();
                        process.QualityState = (int)QualityState.Suspected;
@@ -985,7 +1113,7 @@
                        db.WorkPieceProcess.Add(process);


                        db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(info));
                        db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(cur_db_info));
                    }
                    else
                    {
@@ -1005,6 +1133,37 @@

            }
        }


        public static void SetWorkingProcedureCurrentForOP10(WorkPieceInfo cur_db_info, ref string set_WorkingProcedureCurrent)
        {
            //截断字符串
            if (cur_db_info.WorkingProcedureCurrent.Length == 4)
            {
                try
                {
                    var bb = cur_db_info.WorkingProcedureCurrent.Substring(2, 2);
                    int ii = Convert.ToInt32(bb);
                    if (ii <= 10)
                    {
                        set_WorkingProcedureCurrent = "OP10";
                    }
                    else
                    {
                        set_WorkingProcedureCurrent = "OP40";
                    }
                }
                catch (Exception)
                {
                    set_WorkingProcedureCurrent = cur_db_info.WorkingProcedureCurrent;
                }
            }
            else
            {
                set_WorkingProcedureCurrent = cur_db_info.WorkingProcedureCurrent;
            }
        }

        /// <summary>
        /// 工序完成
        /// </summary>
@@ -1048,7 +1207,7 @@
                            }
                            else
                            {
                                info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
                                info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值 //默认合格，OP05默认是合格
                                info.Remarks = "OP05新增工件信息";
                            }
                            info.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();//WorkPieceInitOnlineTime
@@ -1093,6 +1252,7 @@
                            info.QualityStateUpdateTime = loginfo.UpdatedTime.Value.LocalDateTime;
                            info.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString();
                            //*/


                            var qualityData = db.QualityDataInfo.Where(o => o.WorkPieceID == logMiddle.WorkPieceID).FirstOrDefault();
                            if (qualityData == null || qualityData.WorkPieceID.Length < 1 || qualityData.WorkingProcedure.Length < 1)
@@ -1155,7 +1315,14 @@
                        }
                        else
                        {
                            info.WorkPieceState = (int)WorkPieceState.WIP;
                            //这里修复OP10、OP40 因为PLC先推 SPC推出、再推 产品下线问题，导致 产品下线更新数据时，把SPC数据覆盖的问题 【Editby shaocx,2024-08-27】
                            var isAlow = SystemBussinessHelper.IsAllowUpdateWorkPieceStateToWip(info, db, logMiddle);
                            if (isAlow)
                            {
                                info.WorkPieceState = (int)WorkPieceState.WIP;
                            }


                            if (info.WorkingProcedurePlan.IndexOf(logMiddle.WorkingProcedure) + 4 <= info.WorkingProcedurePlan.Length)
                            {
                                info.WorkPieceCurrentPosition = info.WorkingProcedurePlan.Substring(info.WorkingProcedurePlan.IndexOf(logMiddle.WorkingProcedure), 8);
@@ -1167,15 +1334,20 @@
                        {
                            WorkPieceProcess process = new WorkPieceProcess();
                            process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
                            QualityStateHelper.ResetQualityNoOkForNewProcess(ref process);
                            process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
                            process.StartTime = DateTimeHelper.GetDateTime();
                            process.EndTime = DateTimeHelper.GetDateTime();
                            if (logMiddle.WorkingProcedure.Equals("OP80"))
                            {//OP80的质量数据是后来获取文件搞的
                             //质检数据，再考虑 另外两种状态  【Editby shaocx,2024-08-27】
                                QualityStateHelper.SetQualityStateForOP80(logMiddle, ref info, ref process);
                            }
                            else
                            {
                                process.QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value : (int)QualityState.OK;
                                //不再默认赋值为合格 【Editby shaocx,2024-08-16】
                                //process.QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value : (int)QualityState.OK;//默认合格，已处理
                                process.QualityState = WorkPieceInfoManager.GetQualityStateValue(logMiddle.QualityState);
                            }
                            process.CreatedUserName = logMiddle.MonitoringPoint;
                            process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
@@ -2168,13 +2340,47 @@

        public static void SetQualityNoOk_WorkPieceInfo(WorkPieceLogMiddle logMiddle, ref WorkPieceInfo pieceInfo)
        {
            if (!IsWirteQualityNoOk(logMiddle, pieceInfo.QualityNoOk)) return;

            pieceInfo.QualityNoOk = logMiddle.QualityNoOk;
            pieceInfo.QualityNoOkReason = logMiddle.QualityNoOkReason;
        }
        public static void SetQualityNoOk_WorkPieceProcess(WorkPieceLogMiddle logMiddle, ref WorkPieceProcess pieceProcess)
        {
            if (!IsWirteQualityNoOk(logMiddle, pieceProcess.QualityNoOk)) return;

            pieceProcess.QualityNoOk = logMiddle.QualityNoOk;
            pieceProcess.QualityNoOkReason = logMiddle.QualityNoOkReason;
        }

        /// <summary>
        /// 是否需要重写 NOOK原因
        /// </summary>
        /// <param name="logMiddle"></param>
        /// <param name="pieceInfo"></param>
        /// <returns></returns>
        public static bool IsWirteQualityNoOk(WorkPieceLogMiddle logMiddle, int? qualityNoOk)
        {
            if (logMiddle.WorkingProcedure == (WorkingProcedureForHMI.OP30).ToString())
            {
                //特殊逻辑：按照OP30的顺序判断
                if (logMiddle.QualityNoOk != null && qualityNoOk != null
                    && (
                      qualityNoOk == (int)QualityNoOkEnum.OP30压衬套工位力矩大
                      || qualityNoOk == (int)QualityNoOkEnum.OP30涨断工位力矩大
                      || qualityNoOk == (int)QualityNoOkEnum.OP30终拧紧工位力矩大
                      || qualityNoOk == (int)QualityNoOkEnum.OP30预拧紧工位力矩大
                    )
                    )
                {
                    if ((int)logMiddle.QualityNoOk > (int)qualityNoOk)
                    {//不需要重新赋值
                        return false;
                    }
                }
            }

            return true;
        }


@@ -2476,6 +2682,29 @@
        }


        /// <summary>
        /// 获取质量状态值
        /// </summary>
        /// <param name="qualityState"></param>
        /// <returns></returns>
        public static int GetQualityStateValue(int? qualityState)
        {
            if (qualityState.HasValue == false)
            {
                return (int)QualityState.Suspected;
            }
            if (qualityState.Value == 1)
            {
                return (int)QualityState.OK;
            }
            if (qualityState.Value == 2)
            {
                return (int)QualityState.NG;
            }
            return (int)QualityState.Suspected;
        }


        #endregion
    }
}