2

schangxiang@126.com

2024-07-03 68a5f2b163aa0b5c85327d2f01926a5db24166ad

 DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/BLL/WorkPieceInfoManager.cs

@@ -226,7 +226,14 @@
                        WorkPieceProcess process = new WorkPieceProcess();
                        process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
                        process.StartTime = DateTimeHelper.GetDateTime();

                        process.QualityState = info.QualityState.HasValue ? info.QualityState.Value : (int)QualityState.OK;

                        if (process.WorkingProcedureCurrent == WorkingProcedureForHMI.OP70.ToString())
                        { //特殊处理OP70，因为OP70没有测量，默认合格 [Editby shaocx,2024-07-03]
                            process.QualityState = (int)QualityState.OK;
                        }

                        process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
                        process.CreatedUserName = loginfo.MonitoringPoint;
                        process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
@@ -2234,11 +2241,29 @@
            return loginfo;
        }

        /// <summary>
        /// 设置中间变量的质量数据
        /// </summary>
        /// <param name="logMiddle"></param>
        public static void SetLogMiddleForQuality(ref WorkPieceLogMiddle logMiddle)
        {

            //根据质量数据判断是否合格/不合格 【Editby shaocx,2024-06-25】
            QualityNoOkEnum? qualityNoOkEnum = null;
            QualityState qualityState = WorkPieceInfoManager.CalcQualityStateForOP(logMiddle, ref qualityNoOkEnum);
            logMiddle.QualityState = (int)qualityState;
            logMiddle.QualityStateStr = qualityState.ToString();
            if (qualityNoOkEnum != null)
            {
                logMiddle.QualityNoOk = (int)qualityNoOkEnum;
                logMiddle.QualityNoOkReason = qualityNoOkEnum.ToString();
            }
        }

        /// <summary>
        /// 计算OP 质量数据是否合格
        /// </summary>
        public static QualityState CalcQualityStateForOP(WorkPieceLogMiddle logMiddle, ref QualityNoOkEnum? qualityNoOkEnum)
        private static QualityState CalcQualityStateForOP(WorkPieceLogMiddle logMiddle, ref QualityNoOkEnum? qualityNoOkEnum)
        {
            QualityState qualityState = QualityState.Suspected;
            if (logMiddle.WorkingProcedure == "OP60")
@@ -2281,19 +2306,116 @@
                }
                return qualityState;
            }
            if (logMiddle.WorkingProcedure == "OP80")
            {
                if (logMiddle.QualityState == (int)QualityState.OK)
                {
                    qualityState = QualityState.OK;
                    return qualityState;
                }

                decimal _QualityOP80_D_TKZJ = SystemHelper.GetDecimal(logMiddle.QualityOP80_D_TKZJ);
                if (!(_QualityOP80_D_TKZJ >= (decimal)53.018 && _QualityOP80_D_TKZJ <= (decimal)53.03))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80大头孔直径超差;
                }

                decimal _QualityOP80_X_TKZJ = SystemHelper.GetDecimal(logMiddle.QualityOP80_X_TKZJ);
                if (!(_QualityOP80_X_TKZJ >= (decimal)22.005 && _QualityOP80_X_TKZJ <= (decimal)22.011))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80小头孔直径超差;
                }

                decimal _QualityOP80_ZXJ = SystemHelper.GetDecimal(logMiddle.QualityOP80_ZXJ);
                if (!(_QualityOP80_ZXJ >= (decimal)144.475 && _QualityOP80_ZXJ <= (decimal)144.525))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80中心距超差;
                }

                decimal _QualityOP80_DTKYZD = SystemHelper.GetDecimal(logMiddle.QualityOP80_DTKYZD);
                if (!(_QualityOP80_DTKYZD >= (decimal)0 && _QualityOP80_DTKYZD <= (decimal)0.005))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80大头孔圆柱度超差;
                }

                decimal _QualityOP80_XTSMYD = SystemHelper.GetDecimal(logMiddle.QualityOP80_XTSMYD);
                if (!(_QualityOP80_XTSMYD >= (decimal)0 && _QualityOP80_XTSMYD <= (decimal)0.003))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80小头孔圆度上面超差;
                }

                decimal _QualityOP80_XTXMYD = SystemHelper.GetDecimal(logMiddle.QualityOP80_XTXMYD);
                if (!(_QualityOP80_XTXMYD >= (decimal)0 && _QualityOP80_XTXMYD <= (decimal)0.003))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80小头孔圆度下面超差;
                }

                decimal _QualityOP80To4 = SystemHelper.GetDecimal(logMiddle.QualityOP80To4);
                if (!(_QualityOP80To4 >= (decimal)(-0.075) && _QualityOP80To4 <= (decimal)0.075))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80小头孔平行度弯曲超差;
                }

                decimal _QualityOP80To5 = SystemHelper.GetDecimal(logMiddle.QualityOP80To5);
                if (!(_QualityOP80To5 >= (decimal)(-0.2) && _QualityOP80To5 <= (decimal)0.2))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80小头孔平行度扭曲超差;
                }

                decimal _QualityOP80To6 = SystemHelper.GetDecimal(logMiddle.QualityOP80To6);
                if (!(_QualityOP80To6 >= (decimal)0 && _QualityOP80To6 <= (decimal)0.04))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80大头孔垂直度超差;
                }

                decimal _QualityOP80To10 = SystemHelper.GetDecimal(logMiddle.QualityOP80To10);
                if (!(_QualityOP80To10 >= (decimal)0 && _QualityOP80To10 <= (decimal)0.04))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80小头孔垂直度超差;
                }

                decimal _QualityOP80_Houdu = SystemHelper.GetDecimal(logMiddle.QualityOP80_Houdu);
                if (!(_QualityOP80_Houdu >= (decimal)21.80 && _QualityOP80_Houdu <= (decimal)21.85))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80厚度超差;
                }

                decimal _QualityOP80To1 = SystemHelper.GetDecimal(logMiddle.QualityOP80To1);
                if (!(_QualityOP80To1 >= (decimal)364 && _QualityOP80To1 <= (decimal)385))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80大头端重量超差;
                }

                decimal _QualityOP80To2 = SystemHelper.GetDecimal(logMiddle.QualityOP80To2);
                if (!(_QualityOP80To2 >= (decimal)143 && _QualityOP80To2 <= (decimal)155))
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP80小头端重量超差;
                }


                return qualityState;
            }
            else if (logMiddle.WorkingProcedure == "OP10")
            {
                if (logMiddle.QualityState == (int)QualityState.NG)
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP10厚度超差;
                }
                else
                {
                    qualityState = QualityState.OK;
                }
                return qualityState;
            }
            else if (logMiddle.WorkingProcedure == "OP20")
            {
            {//合格/不合格 是根据PLC判断的
                if (logMiddle.QualityState == (int)QualityState.NG)
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP20小头孔直径超差;
                }
                else
                {
                    qualityState = QualityState.OK;
                }
                return qualityState;
            }
@@ -2303,6 +2425,10 @@
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP35滚压力不合格;
                }
                else
                {
                    qualityState = QualityState.OK;
                }
                return qualityState;
            }
            else if (logMiddle.WorkingProcedure == "OP40")
@@ -2311,6 +2437,10 @@
                {
                    qualityNoOkEnum = QualityNoOkEnum.OP40厚度超差;
                }
                else
                {
                    qualityState = QualityState.OK;
                }
                return qualityState;
            }
            return qualityState;