1

schangxiang@126.com

2024-08-16 565a8a99d48cacf9ef1f3e749400eee78e21ce56

 DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_BusinessLogical/BLL/WorkPieceInfoManager.cs

@@ -182,7 +182,7 @@
                            }
                            else
                            {
                                info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
                                info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值 //默认合格，OP05默认是合格
                                info.Remarks = "OP05新增工件信息";
                            }
                            info.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();
@@ -227,11 +227,13 @@
                        process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
                        process.StartTime = DateTimeHelper.GetDateTime();

                        process.QualityState = info.QualityState.HasValue ? info.QualityState.Value : (int)QualityState.OK;
                        //不再默认赋值为合格 【Editby shaocx,2024-08-16】
                        //process.QualityState = info.QualityState.HasValue ? info.QualityState.Value : (int)QualityState.OK;//默认合格，已处理
                        process.QualityState = GetQualityStateValue(info.QualityState);

                        if (process.WorkingProcedureCurrent == WorkingProcedureForHMI.OP70.ToString())
                        { //特殊处理OP70，因为OP70没有测量，默认合格 [Editby shaocx,2024-07-03]
                            process.QualityState = (int)QualityState.OK;
                            process.QualityState = (int)QualityState.OK;//默认合格，OP70默认是合格
                        }

                        process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
@@ -497,7 +499,7 @@
                                }
                                else
                                {
                                    pieceInfo.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
                                    pieceInfo.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值 //默认合格，OP05默认是合格
                                    pieceInfo.Remarks = "OP05新增工件信息";
                                }
                                pieceInfo.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();
@@ -721,7 +723,12 @@
                            WorkPieceProcess process = new WorkPieceProcess();
                            process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(pieceInfo);
                            process.StartTime = DateTimeHelper.GetDateTime();
                            process.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : (int)QualityState.OK;

                            //不再默认赋值为合格 【Editby shaocx,2024-08-16】
                            //process.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : (int)QualityState.OK;//默认合格，已处理
                            process.QualityState = WorkPieceInfoManager.GetQualityStateValue(pieceInfo.QualityState);


                            //记录质量不合格原因 【Editby shaocx,2024-06-26】
                            //赋值不合格原因
                            SetQualityNoOk_WorkPieceProcess(logMiddle, ref process);
@@ -741,7 +748,11 @@
                            pro.QualityDataInfoID = qualityData.Id;
                            pro.UpdatedUserName = ResetUpdatedUserName(logMiddle);
                            pro.UpdatedTime = DateTimeHelper.GetDateTime();
                            pro.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : 9;

                            //不再默认赋值为合格 【Editby shaocx,2024-08-16】
                            //pro.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : 9;
                            pro.QualityState = WorkPieceInfoManager.GetQualityStateValue(pieceInfo.QualityState);

                            //赋值不合格原因
                            SetQualityNoOk_WorkPieceProcess(logMiddle, ref pro);

@@ -1048,7 +1059,7 @@
                            }
                            else
                            {
                                info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
                                info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值 //默认合格，OP05默认是合格
                                info.Remarks = "OP05新增工件信息";
                            }
                            info.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();//WorkPieceInitOnlineTime
@@ -1175,7 +1186,9 @@
                            }
                            else
                            {
                                process.QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value : (int)QualityState.OK;
                                //不再默认赋值为合格 【Editby shaocx,2024-08-16】
                                //process.QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value : (int)QualityState.OK;//默认合格，已处理
                                process.QualityState = WorkPieceInfoManager.GetQualityStateValue(logMiddle.QualityState);
                            }
                            process.CreatedUserName = logMiddle.MonitoringPoint;
                            process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
@@ -2168,13 +2181,47 @@

        public static void SetQualityNoOk_WorkPieceInfo(WorkPieceLogMiddle logMiddle, ref WorkPieceInfo pieceInfo)
        {
            if (!IsWirteQualityNoOk(logMiddle, pieceInfo.QualityNoOk)) return;

            pieceInfo.QualityNoOk = logMiddle.QualityNoOk;
            pieceInfo.QualityNoOkReason = logMiddle.QualityNoOkReason;
        }
        public static void SetQualityNoOk_WorkPieceProcess(WorkPieceLogMiddle logMiddle, ref WorkPieceProcess pieceProcess)
        {
            if (!IsWirteQualityNoOk(logMiddle, pieceProcess.QualityNoOk)) return;

            pieceProcess.QualityNoOk = logMiddle.QualityNoOk;
            pieceProcess.QualityNoOkReason = logMiddle.QualityNoOkReason;
        }

        /// <summary>
        /// 是否需要重写 NOOK原因
        /// </summary>
        /// <param name="logMiddle"></param>
        /// <param name="pieceInfo"></param>
        /// <returns></returns>
        public static bool IsWirteQualityNoOk(WorkPieceLogMiddle logMiddle, int? qualityNoOk)
        {
            if (logMiddle.WorkingProcedure == (WorkingProcedureForHMI.OP30).ToString())
            {
                //特殊逻辑：按照OP30的顺序判断
                if (logMiddle.QualityNoOk != null && qualityNoOk != null
                    && (
                      qualityNoOk == (int)QualityNoOkEnum.OP30压衬套工位力矩大
                      || qualityNoOk == (int)QualityNoOkEnum.OP30涨断工位力矩大
                      || qualityNoOk == (int)QualityNoOkEnum.OP30终拧紧工位力矩大
                      || qualityNoOk == (int)QualityNoOkEnum.OP30预拧紧工位力矩大
                    )
                    )
                {
                    if ((int)logMiddle.QualityNoOk > (int)qualityNoOk)
                    {//不需要重新赋值
                        return false;
                    }
                }
            }

            return true;
        }


@@ -2476,6 +2523,29 @@
        }


        /// <summary>
        /// 获取质量状态值
        /// </summary>
        /// <param name="qualityState"></param>
        /// <returns></returns>
        public static int GetQualityStateValue(int? qualityState)
        {
            if (qualityState.HasValue == false)
            {
                return (int)QualityState.Suspected;
            }
            if (qualityState.Value == 1)
            {
                return (int)QualityState.OK;
            }
            if (qualityState.Value == 2)
            {
                return (int)QualityState.NG;
            }
            return (int)QualityState.Suspected;
        }


        #endregion
    }
}