202518-修复op35设备状态不对的问题

schangxiang@126.com

2025-01-08 4e475294999e7053036cc162de388010f6ee3132

 DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_DataCaptureV3/FormMain.cs

@@ -912,22 +912,22 @@
        private void button9_Click(object sender, EventArgs e)
        {

            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3001.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3001.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button11_Click(object sender, EventArgs e)
@@ -955,85 +955,85 @@
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3003.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3003.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button15_Click(object sender, EventArgs e)
        {

            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3007.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3007.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button13_Click(object sender, EventArgs e)
        {

            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3004.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3004.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button14_Click(object sender, EventArgs e)
        {

            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP3005.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP3005.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button16_Click(object sender, EventArgs e)
@@ -1124,22 +1124,22 @@
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8001.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8001.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button21_Click(object sender, EventArgs e)
@@ -1168,88 +1168,88 @@
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8003.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8003.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button19_Click(object sender, EventArgs e)
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8004.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8004.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button18_Click(object sender, EventArgs e)
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8005.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8005.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        private void button17_Click(object sender, EventArgs e)
        {


            try
            {
                if (!SystemValue.isStartedImitateModel)
                {
                    MessageBox.Show("请点击调试模式按钮");
                    return;
                }
                DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
                DataCaptureHandler_OP8007.Instance.DataCaptureStart();
            //try
            //{
            //    if (!SystemValue.isStartedImitateModel)
            //    {
            //        MessageBox.Show("请点击调试模式按钮");
            //        return;
            //    }
            //    DataCaptureHandler.WorkPieceID = textBox10.Text.Trim();
            //    DataCaptureHandler_OP8007.Instance.DataCaptureStart();

            }
            catch (Exception ex)
            {
                MessageBox.Show($"模拟异常：{ex.Message}");
                Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            }
            //}
            //catch (Exception ex)
            //{
            //    MessageBox.Show($"模拟异常：{ex.Message}");
            //    Log4NetHelper.WriteErrorLog(LogType.FormMain, "----button10_Click all报错：", ex);
            //}
        }

        /// <summary>
@@ -1560,6 +1560,9 @@
                DeleteDataHandler _deleteDataHandler = new DeleteDataHandler();
                _dataCaptureHandler.Add(_deleteDataHandler);

                DeleteDataOtherHandler _deleteDataOtherHandler = new DeleteDataOtherHandler();
                _dataCaptureHandler.Add(_deleteDataOtherHandler);

                #endregion

                try
@@ -1850,6 +1853,11 @@

        }

        /// <summary>
        /// 测试调试
        /// </summary>
        /// <param name="sender"></param>
        /// <param name="e"></param>
        private void button26_Click(object sender, EventArgs e)
        {
            try
@@ -1868,10 +1876,56 @@
                {
                    switch (config.DataCapturePointCode)
                    {
                        case "OP7009"://清洗机获取采集数据
                            DataCaptureHandler_OP7009.Instance._dataCaptureConfig = config;
                            _dataCaptureHandler.Add(DataCaptureHandler_OP7009.Instance);
                        //测试调试
                        //case "OP1002":
                        //    DataCaptureHandler_OP1002.Instance._dataCaptureConfig = config;
                        //    _dataCaptureHandler.Add(DataCaptureHandler_OP1002.Instance);
                        //    break;
                        //case "OP1003":
                        //    DataCaptureHandler_OP1003.Instance._dataCaptureConfig = config;
                        //    _dataCaptureHandler.Add(DataCaptureHandler_OP1003.Instance);
                        //    break;
                        //#region 02 测量完成标记
                        //case "OP2002A":
                            //case "OP2002B":
                          case "OP2002C":
                            //case "OP3002CH3":
                            //case "OP3002CH4":
                            //case "OP3002CH5":
                            //case "OP3002CH6":
                            //case "OP3502A":
                            //case "OP3502B":
                            //case "OP6002A":
                            //case "OP6002B":
                            //case "OP6002C":
                            //case "OP6002D":
                            //case "OP3502":
                            DataCaptureHandler_02 dc02 = new DataCaptureHandler_02();
                            dc02._dataCaptureConfig = config;
                            _dataCaptureHandler.Add(dc02);
                            break;
                        //#region 01 二维码读取

                        //case "OP3001":
                        //case "OP3501":
                        //case "OP5001A":
                        //case "OP5001B":
                        //case "OP6001":
                        //case "OP7001":
                        //case "OP8001":
                        //DataCaptureHandler_01 dc01 = new DataCaptureHandler_01();
                        //dc01._dataCaptureConfig = config;
                        //_dataCaptureHandler.Add(dc01);
                        //break;
                        //case "OP0501":
                            //DataCaptureHandler_OP0501.Instance._dataCaptureConfig = config;
                            //_dataCaptureHandler.Add(DataCaptureHandler_OP0501.Instance);
                            //break;
                            #endregion
                            //case "OP7009"://清洗机获取采集数据
                            //    DataCaptureHandler_OP7009.Instance._dataCaptureConfig = config;
                            //    _dataCaptureHandler.Add(DataCaptureHandler_OP7009.Instance);
                            //    break;
                            //case "OP3002CH3":
                            //    //case "OP3002CH4":
                            //    //case "OP3002CH5":
@@ -1898,8 +1952,6 @@
                //告警监控
                //AlertMonitor alert = new AlertMonitor();
                //_dataCaptureHandler.Add(alert);
                #endregion

                try
                {
                    DataCaptureHandler.RefreshDataCommonStatic();
@@ -1991,98 +2043,98 @@

        }

        public WorkPieceLogMiddle GetCH5Info(string FullName, WorkPieceLogMiddle wplog)
        {
            try
            {
                string fileContent = File.ReadAllText(FullName);
                string[] lines2 = fileContent.Split('\n');
                bool IDCodeIndex = false;
                int Mcount = 0;
                int i = 0;
                int count = 0;
                foreach (string line in lines2)
                {
                    count++;
                    if (count == 4)
                    {//获取质量结果
                        var list = line.Split(' ');
                        if (list.Count() > 0)
                        {
                            var str = list[list.Count() - 1].ToString().Trim();
                            wplog.QualityStateStr = str.Equals("OK") ? "OK" : "NG";
                        }
                    }
                    // 处理每一行的逻辑
                    if (line.Contains("ID-Code"))//两个拧紧，每个前面都有ID-Code
                    {
                        i++;
                        IDCodeIndex = true;
                        Mcount = 0;
                    }
                    if (IDCodeIndex)
                    {
                        if (line.Contains(" M "))//第三个M行是拧紧数据
                        {//最终力矩
                            Mcount++;
                            if (Mcount == 3)
                            {
                                var str = line.Replace("+", "").Replace("-", "");
                                var list = str.Split('M');
                                if (list.Count() == 4)
                                {
                                    if (i == 1)
                                    {//CH3
                                        wplog.QualityOP30To3 = list[2].ToString().Trim();
                                    }
                                    else
                                    {//CH4
                                        wplog.QualityOP30To9 = list[2].ToString().Trim();
                                    }
                                }
                                IDCodeIndex = false;
                            }
                        }
        //public WorkPieceLogMiddle GetCH5Info(string FullName, WorkPieceLogMiddle wplog)
        //{
        //    try
        //    {
        //        string fileContent = File.ReadAllText(FullName);
        //        string[] lines2 = fileContent.Split('\n');
        //        bool IDCodeIndex = false;
        //        int Mcount = 0;
        //        int i = 0;
        //        int count = 0;
        //        foreach (string line in lines2)
        //        {
        //            count++;
        //            if (count == 4)
        //            {//获取质量结果
        //                var list = line.Split(' ');
        //                if (list.Count() > 0)
        //                {
        //                    var str = list[list.Count() - 1].ToString().Trim();
        //                    wplog.QualityStateStr = str.Equals("OK") ? "OK" : "NG";
        //                }
        //            }
        //            // 处理每一行的逻辑
        //            if (line.Contains("ID-Code"))//两个拧紧，每个前面都有ID-Code
        //            {
        //                i++;
        //                IDCodeIndex = true;
        //                Mcount = 0;
        //            }
        //            if (IDCodeIndex)
        //            {
        //                if (line.Contains(" M "))//第三个M行是拧紧数据
        //                {//最终力矩
        //                    Mcount++;
        //                    if (Mcount == 3)
        //                    {
        //                        var str = line.Replace("+", "").Replace("-", "");
        //                        var list = str.Split('M');
        //                        if (list.Count() == 4)
        //                        {
        //                            if (i == 1)
        //                            {//CH3
        //                                wplog.QualityOP30To3 = list[2].ToString().Trim();
        //                            }
        //                            else
        //                            {//CH4
        //                                wplog.QualityOP30To9 = list[2].ToString().Trim();
        //                            }
        //                        }
        //                        IDCodeIndex = false;
        //                    }
        //                }

                    }
                    if (line.Contains(" MWSP "))
                    {//终拧紧力矩  终拧紧角度
                        var list = line.Split(new String[] { " MWS " }, StringSplitOptions.None);
                        if (list.Count() == 2)
                        {
                            if (i == 1)
                            {//CH3
                                wplog.QualityOP30To4 = list[1].ToString().Trim();
                            }
                            else
                            {//CH4
                                wplog.QualityOP30To10 = list[1].ToString().Trim();
                            }
                            var list2 = list[0].Split(new String[] { " W " }, StringSplitOptions.None);
                            if (list2.Count() == 2)
                            {
                                var str = list2[1].ToString();
                                if (i == 1)
                                {//CH3
                                    wplog.QualityOP30To5 = str.Substring(0, str.IndexOf("MWSP")).Trim();
                                }
                                else
                                {//CH4
                                    wplog.QualityOP30To11 = str.Substring(0, str.IndexOf("MWSP")).Trim();
                                }
                            }
                        }
        //            }
        //            if (line.Contains(" MWSP "))
        //            {//终拧紧力矩  终拧紧角度
        //                var list = line.Split(new String[] { " MWS " }, StringSplitOptions.None);
        //                if (list.Count() == 2)
        //                {
        //                    if (i == 1)
        //                    {//CH3
        //                        wplog.QualityOP30To4 = list[1].ToString().Trim();
        //                    }
        //                    else
        //                    {//CH4
        //                        wplog.QualityOP30To10 = list[1].ToString().Trim();
        //                    }
        //                    var list2 = list[0].Split(new String[] { " W " }, StringSplitOptions.None);
        //                    if (list2.Count() == 2)
        //                    {
        //                        var str = list2[1].ToString();
        //                        if (i == 1)
        //                        {//CH3
        //                            wplog.QualityOP30To5 = str.Substring(0, str.IndexOf("MWSP")).Trim();
        //                        }
        //                        else
        //                        {//CH4
        //                            wplog.QualityOP30To11 = str.Substring(0, str.IndexOf("MWSP")).Trim();
        //                        }
        //                    }
        //                }

                    }
                }
            }
            catch (Exception ex)
            {
                //Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读取 {DataCapturePointCode}CH5工位质量数据异常工件号：{(wplog.WorkPieceID == null ? "" : wplog.WorkPieceID)} 文件名：{FullName}：", ex);
            }
            return wplog;
        //            }
        //        }
        //    }
        //    catch (Exception ex)
        //    {
        //        //Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $"读取 {DataCapturePointCode}CH5工位质量数据异常工件号：{(wplog.WorkPieceID == null ? "" : wplog.WorkPieceID)} 文件名：{FullName}：", ex);
        //    }
        //    return wplog;

        }
        //}
        private void button27_Click(object sender, EventArgs e)
        {
            try