DF22001YiQi.git

			@@ -1,4 +1,6 @@
			using iWare_SCADA_BusinessLogical.Utils;
			using HslCommunication.BasicFramework;
			using iWare.Wms.Core;
			using iWare_SCADA_BusinessLogical.Utils;
			using iWare_SCADA_Model;
			using iWare_SCADA_Model.MiddleModel;
			using iWare_SCADA_Model.TableModel;
			@@ -7,6 +9,7 @@
			using System.Collections.Concurrent;
			using System.Collections.Generic;
			using System.ComponentModel.DataAnnotations;
			using System.Data.Entity.Validation;
			using System.Diagnostics;
			//using System.Data.Entity.Infrastructure;
			using System.Linq;
			@@ -21,32 +24,32 @@
			{
			public class WorkPieceInfoManager
			{
			public static WorkPieceInfo GetWorkPieceInfo(string WorkPieceID)
			{
			using (DbModel db = new DbModel())
			{
			//查询所有
			var query = db.WorkPieceInfo.Where(o => o.WorkPieceID == WorkPieceID).FirstOrDefault();
			return query;
			}
			}
			//public static WorkPieceInfo GetWorkPieceInfo(string WorkPieceID)
			//{
			// using (DbModel db = new DbModel())
			// {
			// //查询所有
			// var query = db.WorkPieceInfo.Where(o => o.WorkPieceID == WorkPieceID).FirstOrDefault();
			// return query;
			// }
			//}


			public static long InsertWorkPieceInfo(WorkPieceInfo workPiece)
			{
			using (DbModel db = new DbModel())
			{
			db.WorkPieceInfo.Add(workPiece);
			db.SaveChanges();
			return workPiece.Id;
			}
			}
			//public static long InsertWorkPieceInfo(WorkPieceInfo workPiece)
			//{
			// using (DbModel db = new DbModel())
			// {
			// db.WorkPieceInfo.Add(workPiece);
			// db.SaveChanges();
			// return workPiece.Id;
			// }
			//}

			public static WorkPieceLogMiddle GetAddWorkPieceLog(WorkPieceLogMiddle loginfo)
			{
			loginfo.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			return loginfo;
			}
			//public static WorkPieceLogMiddle GetAddWorkPieceLog(WorkPieceLogMiddle loginfo)
			//{
			// loginfo.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			// return loginfo;
			//}

			/// <summary>
			/// 给WorkPieceLog主键等公共的的属性赋值
			@@ -56,13 +59,16 @@
			public static WorkPieceLog GetAddWorkPieceLog(WorkPieceLog loginfo)
			{
			loginfo.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			PieceLogTypeEnum pieceLogTypeEnum = PieceLogTypeEnum.正常;
			loginfo.PieceLogType = (int)pieceLogTypeEnum;
			loginfo.PieceLogTypeName = pieceLogTypeEnum.ToString();
			return loginfo;
			}
			public static WorkPieceLog GetAddWorkPieceLog1(WorkPieceLogMiddle loginfo)
			{
			loginfo.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			return loginfo;
			}
			//public static WorkPieceLog GetAddWorkPieceLog1(WorkPieceLogMiddle loginfo)
			//{
			// loginfo.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			// return loginfo;
			//}
			/// <summary>
			/// 通过WorkPieceInfo 给WorkPieceInfoLog 属性赋值
			/// </summary>
			@@ -149,217 +155,12 @@
			}
			catch (Exception ex)
			{
			loginfo.Remarks = (loginfo.Remarks ?? "") + $"{loginfo.WorkPieceID ?? "空"}刀具寿命更新数据异常{ex.Message}";
			loginfo.Remarks = $"{loginfo.WorkPieceID ?? "空"}刀具寿命更新数据异常{ex.Message}";

			}
			}

			/// <summary>
			/// 读取二维码时逻辑
			/// 校验工件是否跳序，质量是否合格
			/// </summary>
			public static void ReadQRcode(WorkPieceLog loginfo, LogType type, PLCService plcService, int? IsFeedback)
			{//此处同时插入了WorkPieceLog，WorkPieceInfoLog表，并新增或修改WorkPieceInfo表
			using (DbModel db = new DbModel())
			{
			try
			{
			bool isAddWorkPieceInfo = false;
			if (loginfo.WorkPieceID.Length == 22)
			{
			WorkPieceInfo info = new WorkPieceInfo();
			info = db.WorkPieceInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
			if (info == null \|\| info.WorkPieceID.Length < 1)
			{//插入WorkPieceInfo表
			loginfo = CommonManager.Instance.GetWorkPieceID(loginfo, type);
			info = EntityPropHelper.Mapper<WorkPieceInfo, WorkPieceLog>(loginfo);
			//EntityPropHelper<WorkPieceLog, WorkPieceInfo>.CopyProp(loginfo, info, loginfo.GetWorkPieceInfoDict());
			if (!loginfo.WorkingProcedure.Equals("OP05"))
			{//当工件二维码第一次出现的工序不是OP05，则设置为可疑状态
			info.QualityState = (int)QualityState.Suspected;
			info.QualityErrorInfo = $"工件二维码第一次出现的工序{loginfo.MonitoringPoint}不是OP05,数据缺失,请确认情况并做相应处理！";
			info.Remarks = $"工件二维码第一次出现的工序{loginfo.WorkingProcedure}不是OP05,数据缺失,请确认情况并做相应处理！";
			}
			else
			{
			info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
			info.Remarks = "OP05新增工件信息";
			}
			info.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();
			info.WorkingProcedurePlan = ConfigHelper.GetConfigString("WorkingProcedureAllStr") ?? "OP05OP10OP20OP30OP35OP40OP50OP60OP70OP80";
			info.CreatedUserName = loginfo.MonitoringPoint;
			info.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			info = ParseQRCode(info);
			isAddWorkPieceInfo = true;
			}
			else
			{
			if (info.WorkingProcedureCurrent.Equals("OP05"))
			{
			loginfo.Remarks = (loginfo.Remarks ?? "") + $"读取二维码{loginfo.WorkPieceID ?? "空"} OP05工序重复读取了";
			return;
			}
			}
			info.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();//
			info.WorkingProcedureEndTime = null;
			info.WorkPieceState = (int)WorkPieceState.WIP;
			info.EquipmentID = loginfo.EquipmentID;
			info.QualityStateUpdateUser = loginfo.UpdatedUserName;
			info.QualityStateUpdateTime = loginfo.UpdatedTime.Value.LocalDateTime;
			info.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString();
			info.UpdatedUserName = loginfo.MonitoringPoint;
			info.UpdatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			info.WorkPieceCurrentPosition = loginfo.WorkingProcedure;
			info.WorkPieceCurrentPositionOrder = info.WorkingProcedurePlan.IndexOf(loginfo.WorkingProcedure) / 2;
			info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
			info.Remarks = info.Remarks ?? "" + $"{info.WorkingProcedureCurrent}工件上线";

			var pro = db.WorkPieceProcess.Where(o => o.WorkPieceID == loginfo.WorkPieceID && !o.OperationType.Equals("SPC") && (o.EndTime == null \|\| o.EndTime <= DateTime.MinValue)).OrderByDescending(o => o.StartTime).FirstOrDefault();
			if (pro != null && pro.WorkPieceID.Length > 1)
			{
			pro.EndTime = DateTimeHelper.GetDateTime();
			pro.UpdatedUserName = loginfo.MonitoringPoint;
			pro.UpdatedTime = DateTimeHelper.GetDateTime();
			pro.Remarks = (pro.Remarks ?? "") + "又一次上线，更新结束时间";
			}
			//每次扫描上线都插入追溯表
			WorkPieceProcess process = new WorkPieceProcess();
			process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
			process.StartTime = DateTimeHelper.GetDateTime();
			process.QualityState = info.QualityState.HasValue ? info.QualityState.Value : (int)QualityState.OK;
			process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			process.CreatedUserName = loginfo.MonitoringPoint;
			process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			process.UpdatedUserName = loginfo.MonitoringPoint;
			process.UpdatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			process.OperationType = OperationType.生产.ToString();
			process.Remarks = "";
			if (loginfo.WorkingProcedure.Equals("OP05"))
			{
			process.EndTime = process.StartTime;
			}
			db.WorkPieceProcess.Add(process);

			//db.Database.AutoTransactionsEnabled = false;// 同一个SaveChanges默认事务，关闭默认事务：... 好像不能用啊，后面再研究吧
			if (isAddWorkPieceInfo)
			{
			db.WorkPieceInfo.Add(info);
			}
			else
			{//不确定info是直接会修改还是需要再次查询，待测试
			//info.Remarks = "修改，具体修改逻辑待定";
			}

			#region 判断是否跳序,或质量不符合然后反馈PLC
			if (IsFeedback.HasValue && IsFeedback.Value == (int)FeedbackMode.FeedbackPLC)
			{
			bool checkQualityInfoCompleteFlag = false;
			bool plcFlag = true;//反馈给PLC的标记
			string message = "";
			checkQualityInfoCompleteFlag = WorkPieceInfoManager.CheckQualityInfoComplete(info, loginfo, type);

			if (!checkQualityInfoCompleteFlag \|\| info.QualityState != (int)QualityState.OK)
			{
			plcFlag = false;
			message = !checkQualityInfoCompleteFlag ? "跳序，" : "";
			message += info.QualityState != (int)QualityState.OK ? "质量不符合" : "";
			}
			////反馈给PLC，（写入点待定）
			//MessageModel fr = null;
			//fr = plcService.WriteValuePoint("", "", plcFlag, PLCManger.GetTypeForString("bool"));
			//if (fr.result)
			//{
			// Log4NetHelper.WriteInfoLog(type, $" 工件{info.WorkPieceID} {loginfo.WorkingProcedure}工序反馈给PLC 成功，出现 {message}");
			//}
			//else
			//{
			// Log4NetHelper.WriteErrorLog(type, $" 工件{info.WorkPieceID} {loginfo.WorkingProcedure}工序反馈给PLC 失败，出现 {message} ，失败原因：{fr.resMsg}");
			//}

			//#region 反馈PLC

			//bool checkQualityInfoCompleteFlag = false;
			//bool plcFlag = true;//反馈给PLC的标记
			//string message = "";
			//checkQualityInfoCompleteFlag = WorkPieceInfoManager.CheckQualityInfoComplete(info, wplog, PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure));

			//if (!checkQualityInfoCompleteFlag \|\| info.QualityState != (int)QualityState.OK)
			//{
			// plcFlag = false;
			// message = !checkQualityInfoCompleteFlag ? "跳序，" : "";
			//message += info.QualityState != (int)QualityState.OK ? "质量不符合" : "";
			//}
			////反馈给PLC，（写入点待定）
			//MessageModel fr = null;
			//fr = plcService.WriteValuePoint("", "", plcFlag, PLCManger.GetTypeForString("bool"));
			//if (fr.result)
			//{
			// Log4NetHelper.WriteInfoLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" 工件{wplog.WorkPieceID} {WorkingProcedure}工序反馈给PLC 成功，出现 {message}");
			//}
			//else
			//{
			// Log4NetHelper.WriteErrorLog(PLCManger.GetLogTypeForWorkingProcedure(WorkingProcedure), $" 工件{wplog.WorkPieceID} {WorkingProcedure}工序反馈给PLC 失败，出现 {message} ，失败原因：{fr.resMsg}");
			//}
			//#endregion
			}
			else
			{//读码完成若工件质量不符合或发生跳序，不用管设备是否把工件放过去，数采系统都不变更当前工序，反馈设备PLC工件不符合，
			//若工序后续收集点收到相关工件信息再变更当前工序，但质量信息不变

			info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
			}
			#endregion

			#region 更新设备实时表

			bool isAddEquipmentCurrentMonitor = false;
			EquipmentCurrentMonitor equinfo = new EquipmentCurrentMonitor();
			equinfo = db.EquipmentCurrentMonitor.Where(o => o.EquipmentID == loginfo.EquipmentID).FirstOrDefault();
			if (equinfo == null \|\| equinfo.Id < 1)
			{//没有工件信息，不做更新
			Log4NetHelper.WriteErrorLog(type, $"设备{loginfo.EquipmentID} 告警监控{loginfo.WorkingProcedure} 没有获取到设备监控信息，现新增");
			equinfo = EntityPropHelper.Mapper<EquipmentCurrentMonitor, WorkPieceLog>(loginfo);
			equinfo.OnlineTime = DateTime.Now;
			isAddEquipmentCurrentMonitor = true;
			}
			else
			{//更新工件
			equinfo.WorkPieceID = loginfo.WorkPieceID;
			equinfo.UpdatedUserName = loginfo.MonitoringPoint;
			equinfo.UpdatedTime = DateTime.Now;
			equinfo.OnlineTime = DateTime.Now;
			}
			if (isAddEquipmentCurrentMonitor)
			{
			equinfo.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			db.EquipmentCurrentMonitor.Add(equinfo);
			}
			#endregion
			//db.WorkPieceLog.Add(GetAddWorkPieceLog(loginfo));
			db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(info));
			//UpdateKnifeToolLift(db, loginfo);//更新刀具寿命信息
			}
			else
			{
			loginfo.Remarks = (loginfo.Remarks ?? "") + $"上线完成读取二维码{loginfo.WorkPieceID ?? "空"}异常";
			Log4NetHelper.WriteErrorLog(type, $" {loginfo.WorkingProcedure}上线监控读码标记读取工件码数据[{loginfo.WorkPieceID ?? "空"}]时异常：");

			}
			}
			catch (Exception e)
			{
			loginfo.Remarks = (loginfo.Remarks ?? "") + $"读取二维码{loginfo.WorkPieceID ?? "空"}更新数据异常{e.Message}";
			}
			finally
			{
			loginfo.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			db.WorkPieceLog.Add(loginfo);
			db.SaveChanges();

			}

			}
			}
			public static WorkPieceLogMiddle QualityDataHand(WorkPieceLogMiddle loginfo, List<EquipmentQualityConfig> qcofig)
			{
			try
			@@ -453,764 +254,56 @@
			return loginfo;
			}



			/// <summary>
			/// 质量检测完成
			/// 赋值修改人【Editby shaocx,2024-07-05】
			/// </summary>
			/// <param name="logMiddle"></param>
			/// <param name="type"></param>
			public static void QualityInfoComplete(WorkPieceLogMiddle logMiddle, LogType type)
			/// <returns></returns>
			public static string ResetUpdatedUserName(WorkPieceLogMiddle logMiddle)
			{
			//此处同时插入了WorkPieceLog，WorkPieceInfoLog表，并新增或修改WorkPieceInfo表
			//插入质量相关表QualityDataInfo
			if (logMiddle.MonitoringPoint.Equals("OP1003"))
			{//因为OP10和OP40是一台机器，OP1003专门是OP40测量的。
			return "OP4003";
			}
			return logMiddle.MonitoringPoint;
			}

			using (DbModel db = new DbModel())




			public static void SetWorkingProcedureCurrentForOP10(WorkPieceInfo cur_db_info, ref string set_WorkingProcedureCurrent)
			{
			//截断字符串
			if (cur_db_info.WorkingProcedureCurrent.Length == 4)
			{

			bool isAddWorkPieceInfo = false;
			WorkPieceLog loginfo2 = new WorkPieceLog();
			loginfo2 = EntityPropHelper.Mapper<WorkPieceLog, WorkPieceLogMiddle>(logMiddle);
			try
			{

			if (logMiddle.WorkPieceID.Length == 22)
			{//获取到的工件号异常
			WorkPieceInfo pieceInfo = new WorkPieceInfo();
			pieceInfo = db.WorkPieceInfo.Where(o => o.WorkPieceID == logMiddle.WorkPieceID).FirstOrDefault();
			if (pieceInfo == null \|\| pieceInfo.WorkPieceID.Length < 1)
			{//没有工件信息，不做更新
			if (logMiddle.MonitoringPoint.Equals("OP1002") \|\| logMiddle.MonitoringPoint.Equals("OP1003") \|\| logMiddle.MonitoringPoint.Contains("OP2002"))
			{//OP10 没有上线扫码枪，约定用测量完成信号当上线标记
			pieceInfo = EntityPropHelper.Mapper<WorkPieceInfo, WorkPieceLogMiddle>(logMiddle);
			//EntityPropHelper<WorkPieceLog, WorkPieceInfo>.CopyProp(loginfo, info, loginfo.GetWorkPieceInfoDict());
			if (!logMiddle.WorkingProcedure.Equals("OP05"))
			{//当工件二维码第一次出现的工序不是OP05，则设置为可疑状态
			pieceInfo.QualityState = (int)QualityState.Suspected;
			pieceInfo.QualityErrorInfo = $"工件二维码第一次出现的工序{logMiddle.MonitoringPoint}不是OP05,数据缺失,请确认情况并做相应处理！";
			pieceInfo.Remarks = $"工件二维码第一次出现的工序{logMiddle.WorkingProcedure}不是OP05,数据缺失,请确认情况并做相应处理！";
			}
			else
			{
			pieceInfo.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
			pieceInfo.Remarks = "OP05新增工件信息";
			}
			pieceInfo.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();
			pieceInfo.WorkingProcedurePlan = ConfigHelper.GetConfigString("WorkingProcedureAllStr") ?? "OP05OP10OP20OP30OP35OP40OP50OP60OP70OP80";
			pieceInfo.CreatedUserName = logMiddle.MonitoringPoint;
			pieceInfo.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			pieceInfo.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();//
			pieceInfo.WorkingProcedureEndTime = null;
			pieceInfo = ParseQRCode(pieceInfo);
			isAddWorkPieceInfo = true;


			}
			else
			{
			loginfo2.Remarks = loginfo2.Remarks ?? "" + $"\|工件{logMiddle.WorkPieceID} 质量检测完成工序{logMiddle.MonitoringPoint} 没有获取到工件信息不做更新";
			Log4NetHelper.WriteErrorLog(type, $"工件{logMiddle.WorkPieceID} 质量检测完成工序{logMiddle.MonitoringPoint} 没有获取到工件信息不做更新");
			return;
			}
			}
			if (logMiddle.MonitoringPoint.Equals("OP1002") \|\| logMiddle.MonitoringPoint.Equals("OP1003") \|\| logMiddle.MonitoringPoint.Contains("OP2002"))
			{// OP10 没有上线扫码枪，约定用测量完成信号当上线标记，所以上线需要修改的字段放这里

			if (logMiddle.WorkingProcedure.Equals("OP10"))
			{
			var WorkingProcedure = (logMiddle.MonitoringPoint.Equals("OP1002") ? "OP10" : "OP40");
			loginfo2.WorkingProcedure = WorkingProcedure;//解决OP10，OP40同一个的问题
			logMiddle.WorkingProcedure = WorkingProcedure;//解决OP10，OP40同一个的问题
			}
			pieceInfo.WorkPieceCurrentPosition = logMiddle.WorkingProcedure;
			pieceInfo.WorkPieceCurrentPositionOrder = pieceInfo.WorkingProcedurePlan.IndexOf(logMiddle.WorkingProcedure) / 2;
			pieceInfo.WorkingProcedureCurrent = logMiddle.WorkingProcedure;
			pieceInfo.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();

			#region 更新设备实时表

			bool isAddEquipmentCurrentMonitor = false;
			EquipmentCurrentMonitor equinfo = new EquipmentCurrentMonitor();
			equinfo = db.EquipmentCurrentMonitor.Where(o => o.EquipmentID == logMiddle.EquipmentID).FirstOrDefault();
			if (equinfo == null \|\| equinfo.Id < 1)
			{//没有工件信息，不做更新
			Log4NetHelper.WriteErrorLog(type, $"设备{logMiddle.EquipmentID} 告警监控{logMiddle.WorkingProcedure} 没有获取到设备监控信息，现新增");
			equinfo = EntityPropHelper.Mapper<EquipmentCurrentMonitor, WorkPieceLog>(logMiddle);
			equinfo.OnlineTime = DateTime.Now;
			isAddEquipmentCurrentMonitor = true;
			}
			else
			{//更新工件
			equinfo.WorkPieceID = logMiddle.WorkPieceID;
			equinfo.UpdatedUserName = logMiddle.MonitoringPoint;
			equinfo.UpdatedTime = DateTime.Now;
			equinfo.OnlineTime = DateTime.Now;
			}
			if (isAddEquipmentCurrentMonitor)
			{
			equinfo.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			db.EquipmentCurrentMonitor.Add(equinfo);
			}
			#endregion
			//UpdateKnifeToolLift(db, loginfo);//更新刀具寿命信息
			}
			pieceInfo.WorkPieceState = (int)WorkPieceState.WIP;//推出后和SPC抽检后质量录入时状态修改回在制品
			pieceInfo.EquipmentID = logMiddle.EquipmentID;
			pieceInfo.QualityStateUpdateUser = logMiddle.UpdatedUserName;
			pieceInfo.QualityStateUpdateTime = logMiddle.UpdatedTime.Value.LocalDateTime;
			pieceInfo.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString();
			pieceInfo.Remarks = pieceInfo.Remarks ?? "" + $"{logMiddle.WorkingProcedure}质量检测完成修改";
			pieceInfo.UpdatedUserName = logMiddle.MonitoringPoint;
			pieceInfo.UpdatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			if (!(pieceInfo.WorkingProcedureStartTime.HasValue && pieceInfo.WorkingProcedureStartTime > DateTime.Parse("1900/01/01")))
			{//工序开始时间没有则赋值
			pieceInfo.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();
			}
			pieceInfo.QualityState = (int)((logMiddle.QualityStateStr.Equals("OK") \|\| logMiddle.QualityStateStr.Equals("0K")) ? QualityState.OK : QualityState.NG);
			//赋值不合格原因
			SetQualityNoOk_WorkPieceInfo(logMiddle, ref pieceInfo);


			if (!pieceInfo.QualityState.Equals(((int)QualityState.OK).ToString()))
			{
			pieceInfo.QualityErrorInfo = $"{logMiddle.WorkingProcedure}工序质量采集数据不合格{pieceInfo.QualityState}";
			}
			else
			{
			pieceInfo.QualityErrorInfo = "";
			}
			logMiddle.QualityState = pieceInfo.QualityState;
			if (isAddWorkPieceInfo)
			{
			db.WorkPieceInfo.Add(pieceInfo);
			}

			#region 根据标准值更新最新质量数据（OP10/OP40/OP20/OP60）
			var qcofig = db.EquipmentQualityConfig.Where(o => o.WorkingProcedure.Equals(logMiddle.WorkingProcedure) && o.ParamType != 1 && o.IsDeleted == false).ToList();
			if (qcofig.Count > 0)
			{
			QualityDataHand(logMiddle, qcofig);
			}
			#endregion


			var qualityData = db.QualityDataInfo.Where(o => o.WorkPieceID == logMiddle.WorkPieceID).FirstOrDefault();
			if (qualityData == null \|\| qualityData.WorkPieceID.Length < 1 \|\| qualityData.WorkingProcedure.Length < 1)
			{//插入QualityDataInfo表
			qualityData = EntityPropHelper.Mapper<QualityDataInfo, WorkPieceLog>(logMiddle);
			db.QualityDataInfo.Add(GetAddQualityDataInfo(qualityData));
			}
			//修改QualityDataInfo表 //重复收到质量信息，会覆盖之前的
			EntityPropHelper<WorkPieceLogMiddle, QualityDataInfo>.CopyProp(logMiddle, qualityData, GetQualityDataInfoUpdate(logMiddle, logMiddle.WorkingProcedure, logMiddle.MonitoringPoint));//指定修改字段

			qualityData.QualityStateUpdateUser = pieceInfo.UpdatedUserName;
			qualityData.QualityReceiveTime = pieceInfo.UpdatedTime.Value.LocalDateTime;
			qualityData.QualityStateUpdateMode = pieceInfo.QualityStateUpdateMode;
			if (logMiddle.WorkingProcedure.Equals("OP10"))
			{
			qualityData.OP10QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP10QualityReceiveTime = DateTimeHelper.GetDateTime();
			}
			else if (logMiddle.WorkingProcedure.Equals("OP20"))
			{
			//Log4NetHelper.WriteErrorLog(type, $" {loginfo.WorkingProcedure}质量信息【{loginfo.QualityStateStr ?? "空"}】" +
			// $"【{(loginfo.QualityState.HasValue? loginfo.QualityState.Value:999)}】【{(info.QualityState.HasValue ? info.QualityState.Value : 888)}】读取工件码数据[{loginfo.WorkPieceID ?? "空"}]");
			qualityData.OP20QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP20QualityReceiveTime = DateTimeHelper.GetDateTime();
			qualityData.OP20QualityFilePath = logMiddle.OP20QualityFilePath;
			}
			else if (logMiddle.WorkingProcedure.Equals("OP30"))
			{
			switch (logMiddle.MonitoringPoint)
			{
			case "OP3002CH3":
			qualityData.OP30QualityFilePathCH3 = logMiddle.OP30QualityFilePathCH3;
			qualityData.OP30QualityStateCH3 = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP30QualityReceiveTimeCH3 = DateTimeHelper.GetDateTime();

			if (qualityData.OP30QualityStateCH3 == ((int)QualityState.NG).ToString())
			{
			logMiddle.QualityNoOk = (int)QualityNoOkEnum.OP30涨断工位力矩大;
			logMiddle.QualityNoOkReason = QualityNoOkEnum.OP30涨断工位力矩大.ToString();
			//赋值不合格原因
			SetQualityNoOk_WorkPieceInfo(logMiddle, ref pieceInfo);
			}

			break;
			case "OP3002CH4":
			qualityData.OP30QualityFilePathCH4 = logMiddle.OP30QualityFilePathCH4;
			qualityData.OP30QualityStateCH4 = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP30QualityReceiveTimeCH4 = DateTimeHelper.GetDateTime();

			if (qualityData.OP30QualityStateCH4 == ((int)QualityState.NG).ToString())
			{
			logMiddle.QualityNoOk = (int)QualityNoOkEnum.OP30预拧紧工位力矩大;
			logMiddle.QualityNoOkReason = QualityNoOkEnum.OP30预拧紧工位力矩大.ToString();
			//赋值不合格原因
			SetQualityNoOk_WorkPieceInfo(logMiddle, ref pieceInfo);
			}

			break;
			case "OP3002CH5":
			qualityData.OP30QualityFilePathCH5 = logMiddle.OP30QualityFilePathCH5;
			qualityData.OP30QualityStateCH5 = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP30QualityReceiveTimeCH5 = DateTimeHelper.GetDateTime();

			if (qualityData.OP30QualityStateCH5 == ((int)QualityState.NG).ToString())
			{
			logMiddle.QualityNoOk = (int)QualityNoOkEnum.OP30终拧紧工位力矩大;
			logMiddle.QualityNoOkReason = QualityNoOkEnum.OP30终拧紧工位力矩大.ToString();
			//赋值不合格原因
			SetQualityNoOk_WorkPieceInfo(logMiddle, ref pieceInfo);
			}

			break;
			case "OP3002CH6":
			qualityData.OP30QualityFilePathCH6 = logMiddle.OP30QualityFilePathCH6;
			qualityData.OP30QualityStateCH6 = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP30QualityReceiveTimeCH6 = DateTimeHelper.GetDateTime();

			if (qualityData.OP30QualityStateCH6 == ((int)QualityState.NG).ToString())
			{
			logMiddle.QualityNoOk = (int)QualityNoOkEnum.OP30压衬套工位力矩大;
			logMiddle.QualityNoOkReason = QualityNoOkEnum.OP30压衬套工位力矩大.ToString();
			//赋值不合格原因
			SetQualityNoOk_WorkPieceInfo(logMiddle, ref pieceInfo);
			}

			break;
			default:
			break;
			}
			//qualityData.OP30QualityState = loginfo.QualityState.HasValue ? loginfo.QualityState.Value.ToString() : "3";
			//qualityData.OP30QualityReceiveTime = DateTimeHelper.GetDateTime();
			}
			else if (logMiddle.WorkingProcedure.Equals("OP35"))
			{
			qualityData.OP35QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP35QualityReceiveTime = DateTimeHelper.GetDateTime();
			}
			else if (logMiddle.WorkingProcedure.Equals("OP40"))
			{
			qualityData.OP40QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP40QualityReceiveTime = DateTimeHelper.GetDateTime();
			}
			else if (logMiddle.WorkingProcedure.Equals("OP60"))
			{
			qualityData.OP60QualityFilePath = logMiddle.OP60QualityFilePath;
			qualityData.OP60QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP60QualityReceiveTime = DateTimeHelper.GetDateTime();
			}
			else if (logMiddle.WorkingProcedure.Equals("OP80"))
			{
			qualityData.OP80QualityFilePath = logMiddle.OP80QualityFilePath;
			qualityData.OP80QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP80QualityReceiveTime = DateTimeHelper.GetDateTime();
			}

			var pro = db.WorkPieceProcess.Where(o => o.WorkPieceID == logMiddle.WorkPieceID && o.WorkingProcedureCurrent == pieceInfo.WorkingProcedureCurrent && o.OperationType == OperationType.生产.ToString()).OrderByDescending(o => o.StartTime).FirstOrDefault();
			if (pro == null \|\| pro.WorkPieceID.Length < 1 \|\| logMiddle.MonitoringPoint.Equals("OP1002") \|\| logMiddle.MonitoringPoint.Equals("OP1003") \|\| logMiddle.MonitoringPoint.Contains("OP2002"))
			{// OP10 没有上线扫码枪，约定用测量完成信号当上线标记，所以上线需要修改的字段放这里
			//上线是每次都插入

			WorkPieceProcess process = new WorkPieceProcess();
			process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(pieceInfo);
			process.StartTime = DateTimeHelper.GetDateTime();
			process.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : (int)QualityState.OK;
			//记录质量不合格原因【Editby shaocx,2024-06-26】
			//赋值不合格原因
			SetQualityNoOk_WorkPieceProcess(logMiddle, ref process);

			process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			process.CreatedUserName = logMiddle.MonitoringPoint;
			process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			process.UpdatedUserName = logMiddle.MonitoringPoint;
			process.UpdatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			process.OperationType = OperationType.生产.ToString();
			process.QualityDataInfoID = qualityData.Id;
			process.Remarks = "";
			db.WorkPieceProcess.Add(process);
			}
			else
			{//其他的都只是修改
			pro.QualityDataInfoID = qualityData.Id;
			pro.UpdatedUserName = logMiddle.MonitoringPoint;
			pro.UpdatedTime = DateTimeHelper.GetDateTime();
			pro.QualityState = pieceInfo.QualityState.HasValue ? pieceInfo.QualityState.Value : 9;
			//赋值不合格原因
			SetQualityNoOk_WorkPieceProcess(logMiddle, ref pro);

			//TODO:判断如果是60工序，那么就要更新pro表的创建人为loginfo.MonitoringPoint 【Editby shaocx,2024-06-05】
			if (logMiddle.WorkingProcedure == "OP60")
			{
			pro.CreatedUserName = logMiddle.MonitoringPoint;

			}
			}

			if (logMiddle.QualityType != null && logMiddle.QualityType.Equals(QualityType.SPC.ToString()))
			{//SPC反馈，
			if (logMiddle.QualityState != (int)QualityState.OK)
			{
			//当某到工序检测到不合格工件时，从该工件加工完成时刻前指定时间起至报检不合格时间止，系统将该工件的最后加工工序在该时间段内加工的所有工件、正在加工的工件、该工序入口处的第一个工件全部标记为疑似状态，由人工复检工件并修改状态，并支持批量变更。
			//答复：在线测量不需要走这个流程，只有SPC抽检才需要，需要把这时间段的工件全部置为疑似，哪怕是已完成工件
			//时间段起始时间：抽检工件生产时间前一SPC抽检时间
			//时间段结束时间：抽检工件质量结果出现后的时间
			//抽检工件工序扫描枪外入口处的第一个工件也把质量状态置为疑似
			//（每一工序SPC抽检是设置的固定的，比如200抽4，状态置为疑似时若工件还在设备内，会继续生产完毕后排出）
			//目前这块逻辑放到了 WebAPI中了

			}

			}
			db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(pieceInfo));
			db.QualityDataInfoLog.Add(GetAddQualityDataInfoLog(qualityData));//插入日志
			var bb = cur_db_info.WorkingProcedureCurrent.Substring(2, 2);
			int ii = Convert.ToInt32(bb);
			if (ii <= 10)
			{
			set_WorkingProcedureCurrent = "OP10";
			}
			else
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"质量检测完成读取二维码{logMiddle.WorkPieceID ?? "空"}异常";
			Log4NetHelper.WriteErrorLog(type, $" {logMiddle.WorkingProcedure}工序监控读码标记读取工件码数据[{logMiddle.WorkPieceID ?? "空"}]时异常：");

			set_WorkingProcedureCurrent = "OP40";
			}
			}
			catch (Exception ex)
			catch (Exception)
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"质量检测完成{logMiddle.WorkPieceID ?? "空"}更新数据异常{ex.Message}++{ex.StackTrace}";
			Log4NetHelper.WriteErrorLog(type, $" {logMiddle.WorkingProcedure}工序监控读码标记读取工件码数据[{logMiddle.WorkPieceID ?? "空"}]时异常：");
			}
			finally
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"质量：{logMiddle.QualityStateStr ?? "空"}";
			db.WorkPieceLog.Add(GetAddWorkPieceLog(loginfo2));//插入工件采集日志表
			db.SaveChanges();
			set_WorkingProcedureCurrent = cur_db_info.WorkingProcedureCurrent;
			}
			}
			}
			/// <summary>
			/// 工件推出NOOK
			/// </summary>
			/// <param name="loginfo"></param>
			/// <param name="type"></param>
			public static void WorkPiecePushOff(WorkPieceLogMiddle loginfo, LogType type)
			{
			using (DbModel db = new DbModel())
			else
			{
			WorkPieceLog loginfo2 = new WorkPieceLog();
			loginfo2 = EntityPropHelper.Mapper<WorkPieceLog, WorkPieceLogMiddle>(loginfo);
			try
			{
			if (loginfo.WorkPieceID != null && loginfo.WorkPieceID.Trim('\0').Length == 22)
			{
			WorkPieceInfo info = new WorkPieceInfo();
			info = db.WorkPieceInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
			if (info == null \|\| info.WorkPieceID.Length < 1)
			{//没有工件信息，不做更新
			Log4NetHelper.WriteErrorLog(type, $"工件{loginfo.WorkPieceID} 工件推出工序{loginfo.WorkingProcedure} 没有获取到工件信息不做更新");
			return;
			}
			else
			{//更新表WorkPieceInfo
			if (loginfo.WorkingProcedure.Equals("OP10"))
			{
			info.WorkPieceCurrentPosition = info.WorkingProcedureCurrent + "NOOK";
			//var WorkingProcedure = (loginfo.MonitoringPoint.Equals("OP1002") ? "OP10" : "OP40");
			loginfo2.WorkingProcedure = info.WorkingProcedureCurrent;//解决OP10，OP40同一个的问题
			loginfo.WorkingProcedure = info.WorkingProcedureCurrent; //解决OP10，OP40同一个的问题
			}
			else
			{
			info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
			info.WorkPieceCurrentPosition = loginfo.WorkingProcedure + "NOOK";
			}
			info.WorkPieceState = (int)WorkPieceState.NOOKPush;
			info.UpdatedUserName = loginfo.MonitoringPoint;
			info.UpdatedTime = DateTime.Now;
			info.Remarks = "工件NOOK推出";
			if (!(info.WorkingProcedureStartTime.HasValue && info.WorkingProcedureStartTime > DateTime.Parse("1900/01/01")))
			{
			info.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();
			}
			info.WorkingProcedureEndTime = DateTimeHelper.GetDateTime();
			info.WorkingProcedureCompleted = info.WorkingProcedureCompleted + loginfo.WorkingProcedure;//已完成工序
			info.WorkPieceCurrentPositionOrder = info.WorkingProcedurePlan.IndexOf(loginfo.WorkingProcedure) / 2;
			}
			if (loginfo.WorkingProcedure.Equals("OP35"))
			{//为了解决OP35的采集到的质量信息是OK还NOOK的情况，OP35 NOOK时更新质量信息
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"OP35NOOK原质量信息{(info.QualityState.HasValue ? info.QualityState.Value.ToString() : "空")}";
			info.QualityState = (int)QualityState.NG;
			if (!info.QualityState.Equals(((int)QualityState.OK).ToString()))
			{
			info.QualityErrorInfo = $"{loginfo.WorkingProcedure}工序质量NOOK采集数据不合格{info.QualityState}";
			}
			else
			{
			info.QualityErrorInfo = "";
			}
			loginfo.QualityState = info.QualityState;

			var qualityData = db.QualityDataInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
			if (qualityData != null)
			{
			qualityData.OP35QualityState = loginfo.QualityState.HasValue ? loginfo.QualityState.Value.ToString() : "3";
			qualityData.OP35QualityReceiveTime = DateTimeHelper.GetDateTime();
			db.QualityDataInfoLog.Add(GetAddQualityDataInfoLog(qualityData));
			}
			}
			//更新上一工序的结束时间
			var pro = db.WorkPieceProcess.Where(o => o.WorkPieceID == loginfo.WorkPieceID && o.WorkingProcedureCurrent == loginfo.WorkingProcedure && o.OperationType == OperationType.生产.ToString()).OrderByDescending(o => o.StartTime).FirstOrDefault();
			if (pro != null && pro.WorkPieceID.Length > 0)
			{
			pro.EndTime = DateTimeHelper.GetDateTime();
			pro.Remarks = (pro.Remarks ?? "") + "NOOK结束";
			pro.UpdatedUserName = loginfo.MonitoringPoint;
			pro.UpdatedTime = DateTimeHelper.GetDateTime();
			}

			db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(info));

			}
			else
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"工件NOOK推出读取二维码{loginfo.WorkPieceID ?? "空"}异常";
			Log4NetHelper.WriteErrorLog(type, $" {loginfo.WorkingProcedure}工件NOOK推出读码标记读取工件码数据[{loginfo.WorkPieceID ?? "空"}]时异常：");
			}
			}
			catch (Exception e)
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"读取二维码{loginfo.WorkPieceID ?? "空"}更新数据异常{e.Message}";
			}


			db.WorkPieceLog.Add(GetAddWorkPieceLog(loginfo2));//插入工件采集日志表
			db.SaveChanges();
			}

			}
			/// <summary>
			/// 工件SPC抽检推出
			/// </summary>
			/// <param name="loginfo"></param>
			/// <param name="type"></param>
			public static void WorkPieceSPCPushOff(WorkPieceLogMiddle loginfo, LogType type)
			{

			using (DbModel db = new DbModel())
			{
			WorkPieceLog loginfo2 = new WorkPieceLog();
			loginfo2 = EntityPropHelper.Mapper<WorkPieceLog, WorkPieceLogMiddle>(loginfo);
			try
			{
			if ((loginfo.WorkPieceID != null && loginfo.WorkPieceID.Trim('\0').Length == 22)
			//\|\| !((loginfo.WorkingProcedure.Equals("OP10") \|\| loginfo.WorkingProcedure.Equals("OP40")) && loginfo.Remarks.Length > 0)
			)
			{
			WorkPieceInfo info = new WorkPieceInfo();
			info = db.WorkPieceInfo.Where(o => o.WorkPieceID == loginfo.WorkPieceID).FirstOrDefault();
			if (info == null \|\| info.WorkPieceID.Length < 1)
			{//没有工件信息，不做更新
			loginfo2.Remarks = $"工件{loginfo.WorkPieceID} 工件SPC推出工序{loginfo.WorkingProcedure} 没有获取到工件信息不做更新";
			Log4NetHelper.WriteErrorLog(type, $"工件{loginfo.WorkPieceID} 工件SPC推出工序{loginfo.WorkingProcedure} 没有获取到工件信息不做更新");
			return;
			}
			else
			{//更新表WorkPieceInfo
			if (loginfo.WorkingProcedure.Equals("OP10"))
			{
			info.WorkPieceCurrentPosition = info.WorkingProcedureCurrent + "SPC";
			//var WorkingProcedure = (loginfo.MonitoringPoint.Equals("OP1002") ? "OP10" : "OP40");
			loginfo2.WorkingProcedure = info.WorkingProcedureCurrent;//解决OP10，OP40同一个的问题
			loginfo.WorkingProcedure = info.WorkingProcedureCurrent; //解决OP10，OP40同一个的问题
			}
			else
			{
			info.WorkingProcedureCurrent = loginfo.WorkingProcedure;
			info.WorkPieceCurrentPosition = loginfo.WorkingProcedure + "SPC";
			}
			info.WorkPieceState = (int)WorkPieceState.SPCPush;
			info.UpdatedUserName = loginfo.MonitoringPoint;
			info.UpdatedTime = DateTime.Now;
			info.WorkingProcedureEndTime = DateTimeHelper.GetDateTime();
			if (!(info.WorkingProcedureStartTime.HasValue && info.WorkingProcedureStartTime > DateTime.Parse("1900/01/01")))
			{
			info.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();
			}


			info.WorkingProcedureCompleted = info.WorkingProcedureCompleted + loginfo.WorkingProcedure;//已完成工序
			info.WorkPieceCurrentPositionOrder = info.WorkingProcedurePlan.IndexOf(loginfo.WorkingProcedure) / 2;
			}
			info.Remarks = "工件SPC抽检推出";

			//更新上一工序的结束时间
			var pro = db.WorkPieceProcess.Where(o => o.WorkPieceID == loginfo.WorkPieceID && o.WorkingProcedureCurrent == loginfo.WorkingProcedure && o.OperationType == OperationType.生产.ToString()).OrderByDescending(o => o.StartTime).FirstOrDefault();
			if (pro != null && pro.WorkPieceID.Length > 0)
			{
			pro.EndTime = DateTimeHelper.GetDateTime();
			pro.Remarks = (pro.Remarks ?? "") + "SPC抽检结束";
			pro.UpdatedUserName = loginfo.MonitoringPoint;
			pro.UpdatedTime = DateTimeHelper.GetDateTime();
			}
			//每次SPC 都插入追溯表
			WorkPieceProcess process = new WorkPieceProcess();
			process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
			process.StartTime = DateTimeHelper.GetDateTime();
			process.OperationType = OperationType.SPC.ToString();
			process.QualityState = (int)QualityState.Suspected;
			process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			process.CreatedUserName = loginfo.MonitoringPoint;
			process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			process.UpdatedUserName = loginfo.MonitoringPoint;
			process.UpdatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			process.Remarks = "工件SPC抽检推出";
			db.WorkPieceProcess.Add(process);


			db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(info));
			}
			else
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"工件SPC抽检推出读取二维码{loginfo.WorkPieceID ?? "空"}异常";
			Log4NetHelper.WriteErrorLog(type, $" {loginfo.WorkingProcedure}工件SPC抽检推出读码标记读取工件码数据[{loginfo.WorkPieceID ?? "空"}]时异常：");
			}
			}
			catch (Exception e)
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"读取二维码{loginfo.WorkPieceID ?? "空"}更新数据异常{e.Message}";
			}
			finally
			{
			db.WorkPieceLog.Add(GetAddWorkPieceLog(loginfo2));//插入工件采集日志表
			db.SaveChanges();
			}

			set_WorkingProcedureCurrent = cur_db_info.WorkingProcedureCurrent;
			}
			}
			/// <summary>
			/// 工序完成
			/// </summary>
			/// <param name="logMiddle"></param>
			/// <param name="type"></param>
			public static void WorkingProcedureComplete(WorkPieceLogMiddle logMiddle, LogType type)
			{

			using (DbModel db = new DbModel())
			{
			if (logMiddle.WorkingProcedure.Equals("OP70"))
			{
			logMiddle.QualityState = (int)QualityState.OK; //如果是OP70，则默认是合格【Editby shaocx,2024-06-25】
			}

			WorkPieceLog loginfo2 = new WorkPieceLog();
			loginfo2 = EntityPropHelper.Mapper<WorkPieceLog, WorkPieceLogMiddle>(logMiddle);

			try
			{
			if (logMiddle.WorkPieceID != null && logMiddle.WorkPieceID.Trim('\0').Length == 22)
			{

			bool isAddWorkPieceInfo = false;
			WorkPieceInfo info = new WorkPieceInfo();
			info = db.WorkPieceInfo.Where(o => o.WorkPieceID == logMiddle.WorkPieceID).FirstOrDefault();
			if (info == null \|\| info.WorkPieceID.Length < 1)
			{//没有工件信息，不做更新（为了测试先先新增）
			Log4NetHelper.WriteErrorLog(type, $"工件{logMiddle.WorkPieceID} 工件推出工序{logMiddle.WorkingProcedure} 没有获取到工件信息不做更新");
			//db.WorkPieceLog.Add(GetAddWorkPieceLog(loginfo));//插入工件采集日志表
			//db.SaveChanges();

			loginfo2 = CommonManager.Instance.GetWorkPieceID(logMiddle, type);
			info = EntityPropHelper.Mapper<WorkPieceInfo, WorkPieceLog>(logMiddle);
			//EntityPropHelper<WorkPieceLog, WorkPieceInfo>.CopyProp(loginfo, info, loginfo.GetWorkPieceInfoDict());
			if (!logMiddle.WorkingProcedure.Equals("OP05"))
			{//当工件二维码第一次出现的工序不是OP05，则设置为可疑状态
			info.QualityState = (int)QualityState.Suspected;
			info.QualityErrorInfo = $"工件二维码第一次出现的工序{logMiddle.MonitoringPoint}不是OP05,数据缺失,请确认情况并做相应处理！";
			info.Remarks = $"工件二维码第一次出现的工序{logMiddle.MonitoringPoint}不是OP05,数据缺失,请确认情况并做相应处理！";
			}
			else
			{
			info.QualityState = (int)QualityState.OK;//此处需要注意，判断所有工序质量，然后再赋值
			info.Remarks = "OP05新增工件信息";
			}
			info.WorkPieceinitOnlineTime = DateTimeHelper.GetDateTime();//WorkPieceInitOnlineTime
			info.WorkingProcedurePlan = ConfigHelper.GetConfigString("WorkingProcedureAllStr") ?? "OP05OP10OP20OP30OP35OP40OP50OP60OP70OP80";
			info.CreatedUserName = logMiddle.MonitoringPoint;
			info.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			info.WorkingProcedureCurrent = logMiddle.WorkingProcedure;
			info.WorkingProcedureEndTime = null;
			info = ParseQRCode(info);
			isAddWorkPieceInfo = true;
			}
			if (logMiddle.WorkingProcedure.Equals("OP10"))
			{
			//var WorkingProcedure = (loginfo.MonitoringPoint.Equals("OP1002") ? "OP10" : "OP40");
			loginfo2.WorkingProcedure = info.WorkingProcedureCurrent;//解决OP10，OP40同一个的问题
			logMiddle.WorkingProcedure = info.WorkingProcedureCurrent; //解决OP10，OP40同一个的问题
			}
			info.UpdatedUserName = logMiddle.MonitoringPoint;
			info.UpdatedTime = DateTimeHelper.GetDateTime();
			info.WorkingProcedureCompleted = info.WorkingProcedureCompleted + logMiddle.WorkingProcedure;//已完成工序
			if (!(info.WorkingProcedureStartTime.HasValue && info.WorkingProcedureStartTime > DateTime.Parse("1900/01/01")))
			{//若一直没有工序开始时间，则赋值当前时间
			info.WorkingProcedureStartTime = DateTimeHelper.GetDateTime();
			}
			info.WorkingProcedureEndTime = DateTimeHelper.GetDateTime();
			info.WorkPieceCurrentPositionOrder = info.WorkingProcedurePlan.IndexOf(logMiddle.WorkingProcedure) / 2;
			info.Remarks = $"{logMiddle.WorkingProcedure}工序完成";
			long op80id = 0;
			if (logMiddle.WorkingProcedure.Equals("OP80"))
			{
			info.WorkPieceState = (int)WorkPieceState.FinishedProducts;
			info.WorkPieceLastOfflineTime = DateTimeHelper.GetDateTime();
			info.WorkPieceCurrentPosition = "OP80";
			info.CompleteTime = DateTimeHelper.GetDateTime();
			info.OP80NewCode = logMiddle.OP80NewCode;

			//质检数据改为获取文件后修改【Editby shaocx,2024-06-15】
			/*
			info.QualityState = (int)((loginfo.QualityStateStr.Equals("OK") \|\| loginfo.QualityStateStr.Equals("0K")) ? QualityState.OK : QualityState.NG);
			loginfo.QualityState = info.QualityState;
			info.QualityStateUpdateUser = loginfo.UpdatedUserName;
			info.QualityStateUpdateTime = loginfo.UpdatedTime.Value.LocalDateTime;
			info.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString();
			//*/

			var qualityData = db.QualityDataInfo.Where(o => o.WorkPieceID == logMiddle.WorkPieceID).FirstOrDefault();
			if (qualityData == null \|\| qualityData.WorkPieceID.Length < 1 \|\| qualityData.WorkingProcedure.Length < 1)
			{//插入QualityDataInfo表
			qualityData = EntityPropHelper.Mapper<QualityDataInfo, WorkPieceLog>(logMiddle);
			db.QualityDataInfo.Add(GetAddQualityDataInfo(qualityData));
			}
			//修改QualityDataInfo表 //重复收到质量信息，会覆盖之前的
			EntityPropHelper<WorkPieceLogMiddle, QualityDataInfo>.CopyProp(logMiddle, qualityData, GetQualityDataInfoUpdate(logMiddle, logMiddle.WorkingProcedure, logMiddle.MonitoringPoint));//指定修改字段

			//质检数据改为获取文件后修改【Editby shaocx,2024-06-15】
			/*
			qualityData.QualityStateUpdateUser = info.UpdatedUserName;
			qualityData.QualityReceiveTime = info.UpdatedTime.Value.LocalDateTime;
			qualityData.QualityStateUpdateMode = info.QualityStateUpdateMode;
			qualityData.OP80QualityState = loginfo.QualityState.HasValue ? loginfo.QualityState.Value.ToString() : "3";
			qualityData.OP80QualityReceiveTime = DateTimeHelper.GetDateTime();
			qualityData.OP80QualityFilePath = loginfo.OP80QualityFilePath;
			op80id = qualityData.Id;
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"质量：{loginfo.QualityStateStr ?? "空"}";
			if (!info.QualityState.Equals(((int)QualityState.OK).ToString()))
			{
			info.QualityErrorInfo = $"{loginfo.WorkingProcedure}工序质量采集数据不合格";
			}
			else
			{
			info.QualityErrorInfo = "";
			}
			//*/
			}
			else if (logMiddle.WorkingProcedure.Equals("OP30"))
			{

			info.QualityState = (int)((logMiddle.QualityStateStr.Equals("OK") \|\| logMiddle.QualityStateStr.Equals("0K")) ? QualityState.OK : QualityState.NG);
			logMiddle.QualityState = info.QualityState;
			info.QualityStateUpdateUser = logMiddle.UpdatedUserName;
			info.QualityStateUpdateTime = logMiddle.UpdatedTime.Value.LocalDateTime;
			info.QualityStateUpdateMode = QualityStateUpdateMode.Auto.ToString();

			var qualityData = db.QualityDataInfo.Where(o => o.WorkPieceID == logMiddle.WorkPieceID).FirstOrDefault();
			if (qualityData == null \|\| qualityData.WorkPieceID.Length < 1 \|\| qualityData.WorkingProcedure.Length < 1)
			{//插入QualityDataInfo表
			qualityData = EntityPropHelper.Mapper<QualityDataInfo, WorkPieceLog>(logMiddle);
			db.QualityDataInfo.Add(GetAddQualityDataInfo(qualityData));
			}
			qualityData.QualityStateUpdateUser = info.UpdatedUserName;
			qualityData.QualityReceiveTime = info.UpdatedTime.Value.LocalDateTime;
			qualityData.QualityStateUpdateMode = info.QualityStateUpdateMode;
			qualityData.OP30QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value.ToString() : "3";
			qualityData.OP30QualityReceiveTime = DateTimeHelper.GetDateTime();
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"质量：{logMiddle.QualityStateStr ?? "空"}";
			if (!info.QualityState.Equals(((int)QualityState.OK).ToString()))
			{
			info.QualityErrorInfo = $"{logMiddle.WorkingProcedure}工序质量采集数据不合格";
			}
			else
			{
			info.QualityErrorInfo = "";
			}
			}
			else
			{
			info.WorkPieceState = (int)WorkPieceState.WIP;
			if (info.WorkingProcedurePlan.IndexOf(logMiddle.WorkingProcedure) + 4 <= info.WorkingProcedurePlan.Length)
			{
			info.WorkPieceCurrentPosition = info.WorkingProcedurePlan.Substring(info.WorkingProcedurePlan.IndexOf(logMiddle.WorkingProcedure), 8);
			}
			}

			var pro = db.WorkPieceProcess.Where(o => o.WorkPieceID == logMiddle.WorkPieceID && o.WorkingProcedureCurrent == info.WorkingProcedureCurrent && o.OperationType == OperationType.生产.ToString()).OrderByDescending(o => o.StartTime).FirstOrDefault();
			if (pro == null \|\| pro.WorkPieceID.Length < 1)
			{
			WorkPieceProcess process = new WorkPieceProcess();
			process = EntityPropHelper.Mapper<WorkPieceProcess, WorkPieceInfo>(info);
			process.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			process.StartTime = DateTimeHelper.GetDateTime();
			process.EndTime = DateTimeHelper.GetDateTime();
			if (logMiddle.WorkingProcedure.Equals("OP80"))
			{//OP80的质量数据是后来获取文件搞的
			}
			else
			{
			process.QualityState = logMiddle.QualityState.HasValue ? logMiddle.QualityState.Value : (int)QualityState.OK;
			}
			process.CreatedUserName = logMiddle.MonitoringPoint;
			process.CreatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			process.UpdatedUserName = logMiddle.MonitoringPoint;
			process.UpdatedTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			process.OperationType = OperationType.生产.ToString();
			process.Remarks = "";
			if (logMiddle.WorkingProcedure.Equals("OP80"))
			{
			process.GetQcDataFlag = logMiddle.GetQcDataFlag;//赋值标记 [Editby shaocx,2024-06-15]
			}
			if (op80id > 0)
			{
			process.QualityDataInfoID = op80id;
			}
			db.WorkPieceProcess.Add(process);
			}
			else
			{
			if (op80id > 0)
			{
			pro.QualityDataInfoID = op80id;
			}
			pro.EndTime = DateTimeHelper.GetDateTime();
			pro.UpdatedUserName = logMiddle.MonitoringPoint;
			pro.UpdatedTime = DateTimeHelper.GetDateTime();
			if (logMiddle.WorkingProcedure.Equals("OP80"))
			{
			if (pro.GetQcDataFlag != 0)
			{
			pro.GetQcDataFlag = logMiddle.GetQcDataFlag;//赋值标记 [Editby shaocx,2024-06-15]
			}
			}
			}


			if (isAddWorkPieceInfo)
			{
			db.WorkPieceInfo.Add(info);
			}
			db.WorkPieceInfoLog.Add(GetAddWorkPieceInfoLog(info));
			}
			else
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"下线完成读取二维码{logMiddle.WorkPieceID ?? "空"}异常";
			Log4NetHelper.WriteErrorLog(type, $" {logMiddle.WorkingProcedure}工序下线读取工件码数据[{logMiddle.WorkPieceID ?? "空"}]时异常：");

			}
			}
			catch (Exception e)
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"读取二维码{logMiddle.WorkPieceID ?? "空"}更新数据异常{e.Message}";
			}
			db.WorkPieceLog.Add(GetAddWorkPieceLog(loginfo2));//插入工件采集日志表
			db.SaveChanges();
			}
			}
			public static void AlertMonitor(WorkPieceLog loginfo, LogType type)
			{

			@@ -1549,13 +642,10 @@
			{//自动运行状态+下料道满料 = 完成（就是有生产出来但没有出设备）
			State = ((int)EnumEquipmentCurrentStateDisplay.完成).ToString();
			}
			//else if (loginfo.IsNormalProduction && loginfo.LackMaterial)
			//{//其他状态全算待机
			// State = ((int)EnumEquipmentCurrentStateDisplay.待机).ToString();
			//}
			else
			{//其他状态全算待机
			State = ((int)EnumEquipmentCurrentStateDisplay.待机).ToString();
			CommonHandleEnumEquipmentCurrentState(db, info, ref State); //公共处理设备当前状态 [Editby shaocx,2025-01-07]
			}
			}
			}
			@@ -1625,7 +715,7 @@
			.OrderByDescending(o => o.WarnStartTime).FirstOrDefault();
			if (loginfo.IsMessage)
			{//若有告警，如果有设备状态变更，肯定插入，此处只修改即可
			//若有告警，如果设备状态没有变更，有告警，也不插入新的（问题：当状态没有更改，如一直是故障，但告警信息有变化，怎么办 ps：此处先不管）
			//若有告警，如果设备状态没有变更，有告警，也不插入新的（问题：当状态没有更改，如一直是故障，但告警信息有变化，怎么办 ps：此处先不管）
			infolog.WarnStartTime = DateTimeHelper.GetDateTime();
			infolog.WarnType = alertall;
			infolog.Warnmsg = warnmsg;
			@@ -1642,164 +732,7 @@
			equlogalert.WarnEndTime = DateTimeHelper.GetDateTime();
			}
			}
			#region 原来的代码，以后删掉

			//EquipmentWorkingLog infolog =new EquipmentWorkingLog();
			//infolog.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			//infolog.LogAddTime = DateTimeHelper.GetDateTime();
			//infolog.WorkPieceLogID = loginfo2.Id;
			//infolog.EquipmentID = info.EquipmentID;
			//bool isAddEquipmentWorkingLog = false;
			//if (loginfo.ischeckAlertStatus)
			//{//告警状态发生变更
			// //说明是一个新告警，需要更新设备监控表
			// //查找未结束的告警
			// var equlog = db.EquipmentWorkingLog.Where(o => o.EquipmentID == loginfo.EquipmentID
			// && o.FailureStartTime != null && o.FailureStartTime != DateTime.MinValue)
			// .OrderByDescending(o=>o.FailureStartTime).FirstOrDefault();
			// if (loginfo.IsCloseAlert)
			// {
			// if (equlog == null\|\| (equlog.FailureEndTime!=null&& equlog.FailureEndTime > DateTime.MinValue))
			// {
			// info.AlertTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			// infolog.FailureStartTime = DateTimeHelper.GetDateTime();
			// infolog.FailureType = faultall;
			// infolog.FailureMsg = faultmsg;
			// infolog.WorkingProcedure = loginfo.WorkingProcedure;
			// infolog.MonitoringPoint = loginfo.MonitoringPoint;
			// infolog.Remarks = "故障信息出现变更1";
			// infolog.UpdateDesc = (infolog.UpdateDesc??"")+"故障信息变更\r\n";
			// isAddEquipmentWorkingLog =true;
			// }
			// }
			// else
			// {
			// if (equlog != null && (equlog.FailureEndTime == null \|\| equlog.FailureEndTime <= DateTime.MinValue))
			// {//告警关闭的，若没有告警信息，不用管
			// equlog.MonitoringPoint = loginfo.MonitoringPoint;
			// equlog.FailureEndTime = DateTimeHelper.GetDateTime();
			// }

			// }
			//}
			//if (loginfo.ischeckMessageStatus)
			//{//告警状态发生变更
			// //说明是一个新告警，需要更新设备监控表
			// //查找未结束的告警
			// var equlog = db.EquipmentWorkingLog.Where(o => o.EquipmentID == loginfo.EquipmentID
			// && o.WarnStartTime != null && o.WarnStartTime != DateTime.MinValue).OrderByDescending(o => o.WarnStartTime).FirstOrDefault();
			// if (loginfo.IsMessage)
			// {
			// if (equlog == null \|\| (equlog.WarnEndTime != null && equlog.WarnEndTime > DateTime.MinValue))
			// {
			// info.WarnTime = DateTime.SpecifyKind(DateTime.Now, DateTimeKind.Local);
			// infolog.WarnStartTime = DateTimeHelper.GetDateTime();
			// infolog.WarnType = alertall;
			// infolog.Warnmsg = warnmsg;
			// infolog.WorkingProcedure = loginfo.WorkingProcedure;
			// infolog.MonitoringPoint = loginfo.MonitoringPoint;
			// infolog.Remarks = "告警信息出现变更2";
			// infolog.UpdateDesc = (infolog.UpdateDesc ?? "") + "告警信息变更\r\n";
			// isAddEquipmentWorkingLog = true;
			// }
			// }
			// else
			// {
			// if (equlog != null && (equlog.WarnEndTime == null \|\| equlog.WarnEndTime <= DateTime.MinValue))
			// {//告警关闭的，若没有告警信息，不用管
			// equlog.MonitoringPoint = loginfo.MonitoringPoint;
			// equlog.WarnEndTime = DateTimeHelper.GetDateTime();
			// }

			// }
			//}
			////故障》警告》其他
			//if (loginfo.IsCloseAlert)
			//{//故障
			// info.AlertTime = info.AlertTime??DateTime.Now;
			// info.FailureType = "";
			// info.WarnType = "";
			// info.Alertmsg = faultmsg;//这个需要代码对应字典维护信息才知道
			// info.FailureType = faultall;
			// State = ((int)EnumEquipmentCurrentStateDisplay.故障).ToString();


			// infolog.FailureStartTime = DateTimeHelper.GetDateTime();
			// infolog.FailureType = faultall;
			// infolog.FailureMsg = faultmsg;
			// if (loginfo.IsMessage)
			// {
			// info.WarnTime = info.WarnTime ?? DateTime.Now;
			// info.Warnmsg = warnmsg;//这个需要代码对应字典维护信息才知道
			// info.WarnType = alertall;
			// }
			//}
			//else if(loginfo.IsMessage)
			//{//警告
			// info.AlertTime = null;
			// info.Alertmsg = "";//这个需要代码对应字典维护信息才知道
			// info.FailureType = "";

			// info.WarnTime = info.WarnTime ?? DateTime.Now;
			// info.Warnmsg = warnmsg;//这个需要代码对应字典维护信息才知道
			// info.WarnType = alertall;

			// infolog.WarnStartTime = DateTimeHelper.GetDateTime();
			// infolog.WarnType = alertall;
			// infolog.Warnmsg = warnmsg;
			// State = ((int)EnumEquipmentCurrentStateDisplay.警告).ToString();
			//}
			//else
			//{//告警结束，获取有告警的数据，然后关闭他
			// info.AlertTime = null;
			// info.Alertmsg = "";//这个需要代码对应字典维护信息才知道
			// info.FailureType = "";
			// info.WarnType = "";
			// info.WarnTime = null;
			// info.Warnmsg = "";
			// if (loginfo.IsNormalProduction&& loginfo.LackMaterial)
			// {
			// State = ((int)EnumEquipmentCurrentStateDisplay.待机).ToString();
			// }
			// else if(loginfo.IsNormalProduction && !loginfo.LackMaterial)
			// {
			// State = ((int)EnumEquipmentCurrentStateDisplay.生产).ToString();
			// }
			// else if(loginfo.IsNormalProduction && loginfo.FullMaterial)
			// {//正常生产+下料道满料 = 完成（就是有生产出来但没有出设备）
			// State = ((int)EnumEquipmentCurrentStateDisplay.完成).ToString();
			// }
			// else
			// {//理论上不可能走到这，只是避免空值
			// State = ((int)EnumEquipmentCurrentStateDisplay.待机).ToString();
			// }
			//}
			//if (!string.IsNullOrEmpty(State) && State != info.EquipmentCurrentState)
			//{//只有状态出现变化才变更
			// info.UpdatedUserName = loginfo.MonitoringPoint;
			// info.UpdatedTime = DateTime.Now;
			// info.EquipmentCurrentState = State;

			// var equlog = db.EquipmentWorkingLog.Where(o => o.EquipmentID == loginfo.EquipmentID
			// && o.EquipmentStateStartTime != null && o.EquipmentStateStartTime != DateTime.MinValue).OrderByDescending(o => o.EquipmentStateStartTime).FirstOrDefault();

			// if (equlog != null && (equlog.EquipmentStateEndTime == null \|\| equlog.EquipmentStateEndTime <= DateTime.MinValue))
			// {
			// equlog.MonitoringPoint = loginfo.MonitoringPoint;
			// equlog.EquipmentStateEndTime = DateTimeHelper.GetDateTime();

			// }
			// //状态变更，需要更新原来的，并插入新的
			// infolog.EquipmentState = State;
			// infolog.EquipmentStateStartTime = DateTimeHelper.GetDateTime();
			// infolog.WorkingProcedure = loginfo.WorkingProcedure;
			// infolog.MonitoringPoint = loginfo.MonitoringPoint;
			// infolog.Remarks = "告警信息出现变更3";
			// infolog.UpdateDesc = (infolog.UpdateDesc ?? "") + $"设备状态变更为{((EnumEquipmentCurrentStateDisplay)int.Parse(State)).ToString()}\r\n";
			// isAddEquipmentWorkingLog = true;
			//}
			////info.Remarks = $"{loginfo.WorkingProcedure}工序告警";
			#endregion
			if (isAddEquipmentCurrentMonitor)
			{
			info.Id = Yitter.IdGenerator.YitIdHelper.NextId();
			@@ -1812,12 +745,51 @@
			}
			catch (Exception e)
			{
			loginfo2.Remarks = (loginfo2.Remarks ?? "") + $"{loginfo2.MonitoringPoint}设备监控更新数据异常{e.Message}.{e.StackTrace}";
			loginfo2.Remarks = $"{loginfo2.MonitoringPoint}设备监控更新数据异常{e.Message}.{e.StackTrace}";
			Log4NetHelper.WriteErrorLog(type, $"{loginfo2.MonitoringPoint}设备监控更新数据异常{e.Message}.{e.StackTrace}");
			}

			//db.WorkPieceLog.Add(loginfo2);//插入设备采集日志表
			db.SaveChanges();
			}
			}


			/// <summary>
			/// 公共处理设备当前状态
			/// </summary>
			/// <param name="db"></param>
			/// <param name="info"></param>
			/// <param name="state"></param>
			private static void CommonHandleEnumEquipmentCurrentState(DbModel db, EquipmentCurrentMonitor info, ref string state)
			{
			try
			{
			//如果是OP35，则处理，如果不是，则不处理
			var query_WorkingProcedure = "OP35";
			if (info.WorkingProcedure == query_WorkingProcedure)
			{
			var quereyCreateTime = DateTime.Now.AddMinutes(-5);
			//判断10分钟之内，只进不出
			var num = db.WorkPieceProcess.Where(o => o.WorkingProcedureCurrent == query_WorkingProcedure
			&& (o.EndTime == null \|\| o.EndTime <= DateTime.MinValue)
			&& o.CreatedTime >= quereyCreateTime
			).Count();
			if (num > 0)
			{
			state = ((int)EnumEquipmentCurrentStateDisplay.生产).ToString();
			return;
			}
			}
			else
			{
			return;
			}
			return;
			}
			catch (Exception)
			{
			return;
			}
			}

			@@ -1975,10 +947,10 @@
			info.UpdatedTime = DateTimeHelper.GetDateTime();
			info.UpdatedUserName = threadinfo.Threadcode;
			info.Threadlastmodifytime = threadinfo.Threadlastmodifytime > DateTime.MinValue ? threadinfo.Threadlastmodifytime : info.Threadlastmodifytime;//如果有传参则更新
			//if (info.Threadstatue==1)
			//{
			// info.Threadlastmodifytime = DateTimeHelper.GetDateTime();//最新跑到数据
			//}
			//if (info.Threadstatue==1)
			//{
			// info.Threadlastmodifytime = DateTimeHelper.GetDateTime();//最新跑到数据
			//}
			}
			db.SaveChanges();
			}
			@@ -2146,13 +1118,47 @@

			public static void SetQualityNoOk_WorkPieceInfo(WorkPieceLogMiddle logMiddle, ref WorkPieceInfo pieceInfo)
			{
			if (!IsWirteQualityNoOk(logMiddle, pieceInfo.QualityNoOk)) return;

			pieceInfo.QualityNoOk = logMiddle.QualityNoOk;
			pieceInfo.QualityNoOkReason = logMiddle.QualityNoOkReason;
			}
			public static void SetQualityNoOk_WorkPieceProcess(WorkPieceLogMiddle logMiddle, ref WorkPieceProcess pieceProcess)
			{
			if (!IsWirteQualityNoOk(logMiddle, pieceProcess.QualityNoOk)) return;

			pieceProcess.QualityNoOk = logMiddle.QualityNoOk;
			pieceProcess.QualityNoOkReason = logMiddle.QualityNoOkReason;
			}

			/// <summary>
			/// 是否需要重写 NOOK原因
			/// </summary>
			/// <param name="logMiddle"></param>
			/// <param name="pieceInfo"></param>
			/// <returns></returns>
			public static bool IsWirteQualityNoOk(WorkPieceLogMiddle logMiddle, int? qualityNoOk)
			{
			if (logMiddle.WorkingProcedure == (WorkingProcedureForHMI.OP30).ToString())
			{
			//特殊逻辑：按照OP30的顺序判断
			if (logMiddle.QualityNoOk != null && qualityNoOk != null
			&& (
			qualityNoOk == (int)QualityNoOkEnum.OP30压衬套工位力矩超差
			\|\| qualityNoOk == (int)QualityNoOkEnum.OP30涨断工位力矩超差
			\|\| qualityNoOk == (int)QualityNoOkEnum.OP30终拧紧工位力矩超差
			\|\| qualityNoOk == (int)QualityNoOkEnum.OP30预拧紧工位力矩超差
			)
			)
			{
			if ((int)logMiddle.QualityNoOk > (int)qualityNoOk)
			{//不需要重新赋值
			return false;
			}
			}
			}

			return true;
			}


			@@ -2234,15 +1240,35 @@
			return loginfo;
			}

			/// <summary>
			/// 设置中间变量的质量数据
			/// </summary>
			/// <param name="logMiddle"></param>
			public static void SetLogMiddleForQuality(ref WorkPieceLogMiddle logMiddle)
			{

			logMiddle.QualityState = (int)((logMiddle.QualityStateStr.Equals("OK") \|\| logMiddle.QualityStateStr.Equals("0K")) ? QualityStateEnum.OK : QualityStateEnum.NG);

			//根据质量数据判断是否合格/不合格【Editby shaocx,2024-06-25】
			QualityNoOkEnum? qualityNoOkEnum = null;
			QualityStateEnum qualityState = WorkPieceInfoManager.CalcQualityStateForOP(logMiddle, ref qualityNoOkEnum);
			logMiddle.QualityState = (int)qualityState;
			logMiddle.QualityStateStr = qualityState.ToString();
			if (qualityNoOkEnum != null)
			{
			logMiddle.QualityNoOk = (int)qualityNoOkEnum;
			logMiddle.QualityNoOkReason = qualityNoOkEnum.ToString();
			}
			}

			/// <summary>
			/// 计算OP 质量数据是否合格
			/// </summary>
			public static QualityState CalcQualityStateForOP(WorkPieceLogMiddle logMiddle, ref QualityNoOkEnum? qualityNoOkEnum)
			private static QualityStateEnum CalcQualityStateForOP(WorkPieceLogMiddle logMiddle, ref QualityNoOkEnum? qualityNoOkEnum)
			{
			QualityState qualityState = QualityState.Suspected;
			QualityStateEnum qualityState = QualityStateEnum.Suspected;
			if (logMiddle.WorkingProcedure == "OP60")
			{
			{//合格/不合格由 WMS自行判断
			decimal _QualityOP60To1 = SystemHelper.GetDecimal(logMiddle.QualityOP60To1);
			decimal _QualityOP60To2 = SystemHelper.GetDecimal(logMiddle.QualityOP60To2);
			var isPass_QualityOP60To1 = false;
			@@ -2268,48 +1294,165 @@

			if (isPass_QualityOP60To1 && isPass_QualityOP60To2)
			{
			qualityState = QualityState.OK;
			qualityState = QualityStateEnum.OK;
			}
			else
			{
			qualityState = QualityState.NG;
			qualityState = QualityStateEnum.NG;
			}
			if (_QualityOP60To1 == 0 \|\| _QualityOP60To2 == 0)
			{
			qualityState = QualityState.Suspected;
			qualityState = QualityStateEnum.Suspected;
			return qualityState;
			}
			return qualityState;
			}
			else if (logMiddle.WorkingProcedure == "OP80")
			{//合格/不合格由 OP80 判断，QualityState 和 QualityStateStr 都在调用当前方法前写入值了
			if (logMiddle.QualityState == (int)QualityStateEnum.OK)
			{
			qualityState = QualityStateEnum.OK;
			return qualityState;
			}

			decimal _QualityOP80_D_TKZJ = SystemHelper.GetDecimal(logMiddle.QualityOP80_D_TKZJ);
			if (!(_QualityOP80_D_TKZJ >= (decimal)53.018 && _QualityOP80_D_TKZJ <= (decimal)53.03))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80大头孔直径超差;
			}

			decimal _QualityOP80_X_TKZJ = SystemHelper.GetDecimal(logMiddle.QualityOP80_X_TKZJ);
			if (!(_QualityOP80_X_TKZJ >= (decimal)22.005 && _QualityOP80_X_TKZJ <= (decimal)22.011))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80小头孔直径超差;
			}

			decimal _QualityOP80_ZXJ = SystemHelper.GetDecimal(logMiddle.QualityOP80_ZXJ);
			if (!(_QualityOP80_ZXJ >= (decimal)144.475 && _QualityOP80_ZXJ <= (decimal)144.525))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80中心距超差;
			}

			decimal _QualityOP80_DTKYZD = SystemHelper.GetDecimal(logMiddle.QualityOP80_DTKYZD);
			if (!(_QualityOP80_DTKYZD >= (decimal)0 && _QualityOP80_DTKYZD <= (decimal)0.005))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80大头孔圆柱度超差;
			}

			decimal _QualityOP80_XTSMYD = SystemHelper.GetDecimal(logMiddle.QualityOP80_XTSMYD);
			if (!(_QualityOP80_XTSMYD >= (decimal)0 && _QualityOP80_XTSMYD <= (decimal)0.003))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80小头孔圆度上面超差;
			}

			decimal _QualityOP80_XTXMYD = SystemHelper.GetDecimal(logMiddle.QualityOP80_XTXMYD);
			if (!(_QualityOP80_XTXMYD >= (decimal)0 && _QualityOP80_XTXMYD <= (decimal)0.003))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80小头孔圆度下面超差;
			}

			decimal _QualityOP80To4 = SystemHelper.GetDecimal(logMiddle.QualityOP80To4);
			if (!(_QualityOP80To4 >= (decimal)(-0.075) && _QualityOP80To4 <= (decimal)0.075))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80小头孔平行度弯曲超差;
			}

			decimal _QualityOP80To5 = SystemHelper.GetDecimal(logMiddle.QualityOP80To5);
			if (!(_QualityOP80To5 >= (decimal)(-0.2) && _QualityOP80To5 <= (decimal)0.2))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80小头孔平行度扭曲超差;
			}

			decimal _QualityOP80To6 = SystemHelper.GetDecimal(logMiddle.QualityOP80To6);
			if (!(_QualityOP80To6 >= (decimal)0 && _QualityOP80To6 <= (decimal)0.04))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80大头孔垂直度超差;
			}

			decimal _QualityOP80To10 = SystemHelper.GetDecimal(logMiddle.QualityOP80To10);
			if (!(_QualityOP80To10 >= (decimal)0 && _QualityOP80To10 <= (decimal)0.04))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80小头孔垂直度超差;
			}

			decimal _QualityOP80_Houdu = SystemHelper.GetDecimal(logMiddle.QualityOP80_Houdu);
			if (!(_QualityOP80_Houdu >= (decimal)21.80 && _QualityOP80_Houdu <= (decimal)21.85))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80厚度超差;
			}

			decimal _QualityOP80To1 = SystemHelper.GetDecimal(logMiddle.QualityOP80To1);
			if (!(_QualityOP80To1 >= (decimal)364 && _QualityOP80To1 <= (decimal)385))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80大头端重量超差;
			}

			decimal _QualityOP80To2 = SystemHelper.GetDecimal(logMiddle.QualityOP80To2);
			if (!(_QualityOP80To2 >= (decimal)143 && _QualityOP80To2 <= (decimal)155))
			{
			qualityNoOkEnum = QualityNoOkEnum.OP80小头端重量超差;
			}


			return qualityState;
			}
			else if (logMiddle.WorkingProcedure == "OP10")
			{
			if (logMiddle.QualityState != (int)QualityState.OK)
			{//合格/不合格由 QualityStateStr值判断
			if (logMiddle.QualityState == (int)QualityStateEnum.NG)
			{
			qualityNoOkEnum = QualityNoOkEnum.OP10厚度超差;
			}
			else
			{
			qualityState = QualityStateEnum.OK;
			}
			return qualityState;
			}
			else if (logMiddle.WorkingProcedure == "OP20")
			{
			if (logMiddle.QualityState != (int)QualityState.OK)
			{//合格/不合格由 QualityStateStr值判断
			if (logMiddle.QualityState == (int)QualityStateEnum.NG)
			{
			qualityNoOkEnum = QualityNoOkEnum.OP20小头孔直径超差;
			}
			else
			{
			qualityState = QualityStateEnum.OK;
			}
			return qualityState;
			}
			else if (logMiddle.WorkingProcedure == "OP30")
			{//合格/不合格由 QualityStateStr值判断
			if (logMiddle.QualityStateStr.Equals("OK"))
			{
			qualityState = QualityStateEnum.OK;
			}
			else
			{
			qualityState = QualityStateEnum.NG;
			}
			return qualityState;
			}
			else if (logMiddle.WorkingProcedure == "OP35")
			{
			if (logMiddle.QualityState != (int)QualityState.OK)
			{//合格/不合格由 QualityStateStr值判断
			if (logMiddle.QualityState == (int)QualityStateEnum.NG)
			{
			qualityNoOkEnum = QualityNoOkEnum.OP35滚压力不合格;
			qualityNoOkEnum = QualityNoOkEnum.OP35滚压力超差;
			}
			else
			{
			qualityState = QualityStateEnum.OK;
			}
			return qualityState;
			}
			else if (logMiddle.WorkingProcedure == "OP40")
			{
			if (logMiddle.QualityState != (int)QualityState.OK)
			{//合格/不合格由 QualityStateStr值判断
			if (logMiddle.QualityState == (int)QualityStateEnum.NG)
			{
			qualityNoOkEnum = QualityNoOkEnum.OP40厚度超差;
			}
			else
			{
			qualityState = QualityStateEnum.OK;
			}
			return qualityState;
			}
			@@ -2317,6 +1460,29 @@
			}


			/// <summary>
			/// 获取质量状态值
			/// </summary>
			/// <param name="qualityState"></param>
			/// <returns></returns>
			public static int GetQualityStateValue(int? qualityState)
			{
			if (qualityState.HasValue == false)
			{
			return (int)QualityStateEnum.Suspected;
			}
			if (qualityState.Value == 1)
			{
			return (int)QualityStateEnum.OK;
			}
			if (qualityState.Value == 2)
			{
			return (int)QualityStateEnum.NG;
			}
			return (int)QualityStateEnum.Suspected;
			}


			#endregion
			}
			}