2

schangxiang@126.com

2024-06-29 2b6ed5c90044f5e7e18087530e871faeb6e445ee

 DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_Model/Enums.cs

@@ -79,6 +79,43 @@
        /// </summary>
        Suspected = 3
    }

    /// <summary>
    /// 不合格原因 【Editby shaocx,2024-06-26】
    /// </summary>
    public enum QualityNoOkEnum
    {


        OP10厚度超差 = 2,
        OP20小头孔直径超差 = 3,
        OP30涨断工位力矩大 = 4,
        OP35滚压力不合格 = 5,
        OP40厚度超差 = 6,
        OP60小头孔直径超差 = 8,
        OP80尺寸超差 = 10,
        OP30预拧紧工位力矩大 = 11,
        OP30终拧紧工位力矩大 = 12,
        OP30压衬套工位力矩大 = 13,
        OP60大头孔直径超差 = 14,
        OP80重量超差 = 15,

        OP80大头孔直径超差 = 16,
        OP80小头孔直径超差 = 17,
        OP80中心距超差 = 18,
        OP80大头孔圆柱度超差 = 19,
        OP80小头孔圆度上面超差 = 20,
        OP80小头孔圆度下面超差 = 21,
        OP80小头孔平行度扭曲超差 = 22,
        OP80小头孔平行度弯曲超差 = 23,
        OP80大头孔垂直度超差 = 24,
        OP80小头孔垂直度超差 = 25,
        OP80厚度超差 = 26,
        OP80大头端重量超差 = 27,
        OP80小头端重量超差 = 28,

    }

    /// <summary>
    /// 质量状态修改方式
    /// </summary>