DataCapture/iWare_SCADA_DataCapture/iWare_SCADA_Model/Enums.cs
@@ -85,7 +85,7 @@ /// </summary> public enum QualityNoOkEnum { OP10厚度超差 = 2, OP20小头孔直径超差 = 3, @@ -99,6 +99,21 @@ OP30压衬套工位力矩大 = 13, OP60大头孔直径超差 = 14, OP80重量超差 = 15, OP80大头孔直径超差 = 16, OP80小头孔直径超差 = 17, OP80中心距超差 = 18, OP80大头孔圆柱度超差 = 19, OP80小头孔圆度上面超差 = 20, OP80小头孔圆度下面超差 = 21, OP80小头孔平行度扭曲超差 = 22, OP80小头孔平行度弯曲超差 = 23, OP80大头孔垂直度超差 = 24, OP80小头孔垂直度超差 = 25, OP80厚度超差 = 26, OP80大头端重量超差 = 27, OP80小头端重量超差 = 28, } /// <summary>
